BCD Electric SOR 2018

Bihar Construction Department

Electric Schedule of Rates 2018

Electric SOR 2018

CODENODESCRIPTIONUNITRATE
IN FIG.
Code No. 1.1.1 E. Deptt. Bihar S/R-18, P-21Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm FR PVC insulated Copper conductor single core cable in surface/ recessed PVC conduit, with piano type switch Phenolic laminated sheet suitable size PVC/G.I. Box etc. as required.
(a) Group A
Per
Point
465
Code No. 1.1.2 E. Deptt. Bihar S/R-18, P-21Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm FR PVC insulated Copper conductor single core cable in surface/ recessed PVC conduit, with piano type switch Phenolic laminated sheet suitable size PVC/G.I. Box etc. as required.
(a) Group B
Per
Point
559
Code No. 1.1.3 E. Deptt. Bihar S/R-18, P-21Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm FR PVC insulated Copper conductor single core cable in surface/ recessed PVC conduit, with piano type switch Phenolic laminated sheet suitable size PVC/G.I. Box etc. as required.
(a) Group C
Per
Point
681
Code No. 1.2 E. Deptt. Bihar S/R-18, P-21Wiring for twin Control light point with 1.5 Sq.mm PVC insulated copper conductor single core cable in surface/recessed PVC conduit 2 way piano type switch, phenolic leminated sheet, suitable size PVC/G.I. box and etc. as requiredPer
Point
685
Sl.No.1.3.1 E.Deptt. Bihar S/R-18, P-21Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm FR PVC insulated Copper conductor single core cable in surface/ recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. Box etc. as required.
(a) Group A
Per
Point
513
Sl.No.1.3.2 E.Deptt. Bihar S/R-18, P-21Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch, modular plate, suitable size G.I. box etc as required.
(a) Group B
Per
Point
602
Sl.No.1.3.3 E.Deptt. Bihar S/R-18, P-21Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm FR PVC insulated Copper conductor single core cable in surface/ recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. Box etc. as required.
(a) Group C
Per
Point
724
Code No. 1.4 E. Deptt. Bihar S/R-18, P-22Wiring for twin control light point with 1.5 Sq.mm FR PVC insulated Copper conductor single core cable in surface/ recessed medium class PVC conduit, 2 way modular switch,modular plate, suitable size G.I. Box etc. as required.

Per
Point
755
Code No. 1.5 E. Deptt. Bihar S/R-18, P-22Wiring for light/Power plug with 2x4 Sq.mm FR PVC insulated Copper conductor single core cable in surface recessed PVC conduit along with 1 No. 4 sq.mm. FR PVC insulated copper conductor single core cable for loop earthing as required.Per
Mtr.
200
Code No. 1.6 E. Deptt. Bihar S/R-18, P-22Wiring for light/power plug with 2 x 4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 2 nos. 4 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.Per
Mtr.
335
Code No. 1.7.1 E. Deptt. Bihar S/R-18, P-22Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required.
CKT- (2 x1.5mm2 + 1x1.5 mm2 earth wire)
Per
Mtr.
130
Code No. 1.7.2 E. Deptt. Bihar S/R-18, P-22Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required.
CKT- (2 x2.5mm2 + 1x2.5 mm2 earth wire)
Per
Mtr.
161
Code No. 1.7.3 E. Deptt. Bihar S/R-18, P-22Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required.
CKT- (2 x4.0mm2 + 1x4.0 mm2)
Per
Mtr.
200
Code No. 1.7.4 E. Deptt. Bihar S/R-18, P-22Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required.
Submain- (2 x6.0 mm2 + 1x6.0 mm2 earth wire)
Per
Mtr.
271
Code No. 1.7.5 E. Deptt. Bihar S/R-18, P-22Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required.
Submain (2 x10.5 mm2 + 1x10 mm2)
Per
Mtr.
382
Code No. 1.7.6 E. Deptt. Bihar S/R-18, P-22Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required.
Submain (2 x16.00 mm2 + 1x16 mm2)
Per
Mtr.
559
Code No. 1.7.7 E. Deptt. Bihar S/R-18, P-23Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required.
Submain (2 x25.00 mm2 + 1x16 mm2)
Per
Mtr.
727
Code No. 1.7.8 E. Deptt. Bihar S/R-18, P-24Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required.
Submain (2 x35.00 mm2 + 1x16 mm2)
Per
Mtr.
919
Code No. 1.7.9 E. Deptt. Bihar S/R-18, P-22Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required.
Submain (4 x2.50 mm2 + 1x2.5 mm2)
Per
Mtr.
226
Code No. 1.7.10 E. Deptt. Bihar S/R-18, P-23Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required.
Submain (4x4.0 mm2 + 1x4.0mm2)
Per
Mtr.
294
Code No. 1.7.11 E. Deptt. Bihar S/R-18, P-23Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required.
Submain (4x6.0 mm2 + 1x6.0mm2)
Per
Mtr.
410
Code No. 1.7.12 E. Deptt. Bihar S/R-18, P-23Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required.
Submain (4x10 mm2 + 1x10 mm2)
Per
Mtr.
593
Code No. 1.7.13 E. Deptt. Bihar S/R-18, P-23Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required.
Submain (4x16 mm2 + 1x16 mm2)
Per
Mtr.
879
Code No. 1.7.14 E. Deptt. Bihar S/R-18, P-24Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required.
Submain (4x25 mm2 + 1x16 mm2)
Per
Mtr.
1232
Code No. 1.7.15 E. Deptt. Bihar S/R-18, P-25Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required.
Submain (4x35 mm2 + 1x16 mm2)
Per
Mtr.
1587
Sl.No.1.8.1 E.Deptt. Bihar S/R-18, P-23Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm PVC insulated Aluminium conductor single core cable in surface/ recessed PVC conduit, with piano type switch Phenolic laminated sheet suitable size PVC/G.I. Box single core cable etc. as required.
(a) Group A
Per
Point
387
Sl.No.1.8.2 E.Deptt. Bihar S/R-18, P-23Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm PVC insulated Aluminium conductor single core cable in surface/ recessed PVC conduit, with piano type switch Phenolic laminated sheet suitable size PVC/G.I. Box single core cable etc. as required.
(b) Group B
Per
Point
448
Sl.No.1.8.3 E.Deptt. Bihar S/R-18, P-23Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm PVC insulated Aluminium conductor single core cable in surface/ recessed PVC conduit, with piano type switch Phenolic laminated sheet suitable size PVC/G.I. Box single core cable etc. as required.
(a) Group C
Per
Point
542
Sl.No.1.9
E.Deptt.Bihar
S/R-18
P-23
Wiring for twin Control light point with 1.5 Sq.mm PVC insulated aluminium conductor single core cable in surface/recessed PVC conduit 2 way piano type switch, phenolic leminated sheet, suitable size PVC/G.I. box and etc. as requiredPer
Point
546
Sl.No. 1.10
E.Deptt. Bihar S/R-18,P-24
Wiring for light/power plug with 2x4 mm2 FR PVC insulated copper concudtor single core cable in surface/recessed PVC conduit along with one no. 4 mm2 FR PVC insulated copper conductor single core cable for loop earthing etc as required.Per Mtr.88
Sl.No. 1.11
E.Deptt. Bihar S/R-18,P-25
Wiring for light/power plug with 4x4 mm2 FR PVC insulated copper concudtor single core cable in surface/recessed PVC conduit along with 2 noS. 4 mm2 PVC insulated aluminium conductor single core cable for loop earthing etc as required.Per Mtr.134
Sl.No. 1.12.1
E.Deptt. Bihar S/R-18,P-24
Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required.
2 x 1.5 Sq.mm + 1x 1.5 Sq.mm earth wire
Metre88
Sl.No. 1.12.2
E.Deptt. Bihar S/R-18,P-24
Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required.
2 x 2.5 Sq.mm + 1x 2.5 Sq.mm earth wire
Metre93
Sl.No. 1.12.3
E.Deptt. Bihar S/R-18,P-25
Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required.
2 x 4 Sq.mm + 1x 4 Sq.mm earth wire
Metre100
Sl.No. 1.12.4
E.Deptt. Bihar S/R-18,P-24
Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required.
2 x 6 Sq.mm + 1x 6 Sq.mm earth wire
Metre119
Sl.No. 1.12.5
E.Deptt. Bihar S/R-18,P-24
Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required.
2 x 10 Sq.mm + 1x 10 Sq.mm earth wire
Metre139
Sl.No. 1.12.6
E.Deptt. Bihar S/R-18,P-25
Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required.
2 x 16 Sq.mm + 1x 16 Sq.mm earth wire
Metre180
Sl.No. 1.12.7
E.Deptt. Bihar S/R-18,P-26
Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required.
2 x 25 Sq.mm + 1x 16 Sq.mm earth wire
Metre186
Sl.No. 1.12.8
E.Deptt. Bihar S/R-18,P-27
Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required.
2 x 2.5 Sq.mm + 1x 2.5 Sq.mm earth wire
Metre112
Sl.No. 1.12.9
E.Deptt. Bihar S/R-18,P-28
Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required.
4 x 4 Sq.mm + 1x 4 Sq.mm earth wire
Metre127
Sl.No. 1.12.10
E.Deptt. Bihar S/R-18,P-29
Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required.
4 x 6 Sq.mm + 1x 6 Sq.mm earth wire
Metre155
Sl.No. 1.12.11
E.Deptt. Bihar S/R-18,P-24
Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required.
4 x 10 Sq.mm + 1x 10 Sq.mm earth wire
Metre187
Sl.No. 1.12.12
E.Deptt. Bihar S/R-18,P-24
Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required.
4 x 16 Sq.mm + 1 x 16 Sq.mm earth wire
Metre247
Sl.No. 1.12.13
E.Deptt. Bihar S/R-18,P-25
Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required.
4 x 25 Sq.mm + 1 x 25 Sq.mm earth wire
Metre326
Sl.No.1.13.1 E.Deptt. Bihar S/R-18, P-25Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm. FR PVC insulated copper donductor single core cable in existing surface/ recessed PVC conduit including dismantling as required.
Group A
Per
Point
298
Sl.No.1.13.2 E.Deptt. Bihar S/R-18, P-25Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm. FR PVC insulated copper donductor single core cable in existing surface/ recessed PVC conduit including dismantling as required.
Group B
Per
Point
348
Sl.No.1.13.3 E.Deptt. Bihar S/R-18, P-25Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm. FR PVC insulated copper donductor single core cable in existing surface/ recessed PVC conduit including dismantling as required.
Group C
Per
Point
468
Sl.No.1.14 E.Deptt. Bihar S/R-18, P-24Rewiring for twin control light point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable and 1.5 sq.mm FR PVC insulated copper conductor single core as earth wire in existing surface/ recessed medium class PVC conduit including dismentaling as required.Per
Point
473
Sl.No.1.15.1 E.Deptt. Bihar S/R-18, P-25Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
1 x 1.5 sq.mm
Metre24
Sl.No.1.15.2 E.Deptt. Bihar S/R-18, P-25Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
2 x 1.5 sq.mm
Metre41
Sl.No.1.15.3 E.Deptt. Bihar S/R-18, P-25Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
3 x 1.5 sq.mm
Metre62
Sl.No.1.15.4 E.Deptt. Bihar S/R-18, P-25-26Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
4 x 1.5 sq.mm
Metre79
Sl.No.1.15.5 E.Deptt. Bihar S/R-18, P-25-27Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
5 x 1.5 sq.mm
Metre100
Sl.No.1.15.6 E.Deptt. Bihar S/R-18, P-25-28Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
6 x 1.5 sq.mm
Metre117
Sl.No.1.15.7 E.Deptt. Bihar S/R-18, P-25-29Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
7 x 1.5 sq.mm
Metre141
Sl.No.1.15.8 E.Deptt. Bihar S/R-18, P-25-30Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
8 x 1.5 sq.mm
Metre158
Sl.No.1.15.9 E.Deptt. Bihar S/R-18, P-25-31Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
9 x 1.5 sq.mm
Metre182
Sl.No.1.15.10 E.Deptt. Bihar S/R-18, P-25-32Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
10 x 1.5 sq.mm
Metre199
Sl.No.1.15.11 E.Deptt. Bihar S/R-18, P-25-26Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
2 x 2.5 sq.mm
Metre62
Sl.No.1.15.12 E.Deptt. Bihar S/R-18, P-25-27Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
3 x 2.5 sq.mm
Metre93
Sl.No.1.15.13 E.Deptt. Bihar S/R-18, P-25-28Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
4 x 2.5 sq.mm
Metre120
Sl.No.1.15.14 E.Deptt. Bihar S/R-18, P-25-29Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
5 x 2.5 sq.mm
Metre151
Sl.No.1.15.15 E.Deptt. Bihar S/R-18, P-25-30Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
6 x 2.5 sq.mm
Metre178
Sl.No.1.15.16 E.Deptt. Bihar S/R-18, P-25-31Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
7 x 2.5 sq.mm
Metre213
Sl.No.1.15.17 E.Deptt. Bihar S/R-18, P-25-32Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
8 x 2.5 sq.mm
Metre240
Sl.No.1.15.18 E.Deptt. Bihar S/R-18, P-25-33Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
9 x 2.5 sq.mm
Metre275
Sl.No.1.15.19 E.Deptt. Bihar S/R-18, P-25-34Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
10 x 2.5 sq.mm
Metre302
Sl.No.1.15.20 E.Deptt. Bihar S/R-18, P-25-26Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
2 x 4 sq.mm
Metre95
Sl.No.1.15.21 E.Deptt. Bihar S/R-18, P-25-27Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
3 x 4 sq.mm
Metre135
Sl.No.1.15.22 E.Deptt. Bihar S/R-18, P-25-28Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
4 x 4 sq.mm
Metre176
Sl.No.1.15.23 E.Deptt. Bihar S/R-18, P-25-29Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
5 x 4 sq.mm
Metre217
Sl.No.1.15.24 E.Deptt. Bihar S/R-18, P-25-30Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
6 x 4 sq.mm
Metre257
Sl.No.1.15.25 E.Deptt. Bihar S/R-18, P-25-31Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
7 x 4 sq.mm
Metre298
Sl.No.1.15.26 E.Deptt. Bihar S/R-18, P-25-32Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
8 x 4 sq.mm
Metre339
Sl.No.1.15.27 E.Deptt. Bihar S/R-18, P-25-33Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
9 x 4 sq.mm
Metre380
Sl.No.1.15.28 E.Deptt. Bihar S/R-18, P-25-34Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
10 x 4 sq.mm
Metre432
Sl.No.1.15.29 E.Deptt. Bihar S/R-18,
P-25-26
Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
2 x 6 sq.mm
Metre136
Sl.No.1.15.30 E.Deptt. Bihar S/R-18, P-25-26Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
3 x 6 sq.mm
Metre196
Sl.No.1.15.31 E.Deptt. Bihar S/R-18, P-25-27Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
4 x 6 sq.mm
Metre264
Sl.No.1.15.32 E.Deptt. Bihar S/R-18, P-25-28Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
5 x 6 sq.mm
Metre325
Sl.No.1.15.33 E.Deptt. Bihar S/R-18, P-25-29Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
6 x 6 sq.mm
Metre393
Sl.No.1.15.34 E.Deptt. Bihar S/R-18, P-25-30Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
7 x 6 sq.mm
Metre453
Sl.No.1.15.35 E.Deptt. Bihar S/R-18, P-25-31Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
8 x 6 sq.mm
Metre516
Sl.No.1.15.36 E.Deptt. Bihar S/R-18, P-25-32Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
9 x 6 sq.mm
Metre576
Sl.No.1.15.37 E.Deptt. Bihar S/R-18, P-25-33Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed:
10 x 6 sq.mm
Metre637
Sl.No.1.16.1 E.Deptt. Bihar S/R-18, P-27Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as requirjed.1 PairMetre13
Sl.No.1.16.2 E.Deptt. Bihar S/R-18, P-27Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as requirjed.2 PairMetre18
Sl.No.1.16.3 E.Deptt. Bihar S/R-18, P-27Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as requirjed.4 PairMetre22
Sl.No.1.17 E.Deptt. Bihar S/R-18, P-27Supplying and drawing Construction of co-axial TV cable RG-6 grade copper conductor PE insulated, with PVC sheath in the existing surface/recessed PVC conduit as required.Metre29
Sl.No.1.18.1 E.Deptt. Bihar S/R-18, P-27Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm. PVC insulated aluminium conductor single core cable in existing surface/ recessed PVC conduit including dismantling as required.
Group A
Per Point173
Sl.No.1.18.2 E.Deptt. Bihar S/R-18, P-27Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm. PVC insulated aluminium conductor single core cable in existing surface/ recessed PVC conduit including dismantling as required.
Group B
Per Point182
Sl.No.1.18.3 E.Deptt. Bihar S/R-18, P-27Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm. PVC insulated aluminium conductor single core cable in existing surface/ recessed PVC conduit including dismantling as required.
Group C
Per Point264
Sl.No.1.19 E.Deptt. Bihar S/R-18, P-28Rewiring for twin control light point with 1.5 sq.mm. PVC insulated aluminium conductor single core cable in existing surface/ recessed PVC conduit including dismantling as required.
Point194
Sl.No.1.20.1 E.Deptt. Bihar S/R-18, P-28Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
1 x 1.5 sq.mm
Metre8
Sl.No.1.20.2 E.Deptt. Bihar S/R-18, P-28Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
2 x 1.5 sq.mm
Metre10
Sl.No.1.20.3 E.Deptt. Bihar S/R-18, P-28Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
3 x 1.5 sq.mm
Metre16
Sl.No.1.20.4 E.Deptt. Bihar S/R-18, P-28Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
4 x 1.5 sq.mm
Metre18
Sl.No.1.20.5 E.Deptt. Bihar S/R-18, P-28Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
5 x 1.5 sq.mm
Metre23
Sl.No.1.20.6 E.Deptt. Bihar S/R-18, P-28Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
6 x 1.5 sq.mm
Metre26
Sl.No.1.20.7 E.Deptt. Bihar S/R-18, P-28Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
7 x 1.5 sq.mm
Metre34
Sl.No.1.20.8 E.Deptt. Bihar S/R-18, P-28Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
8 x 1.5 sq.mm
Metre36
Sl.No.1.20.9 E.Deptt. Bihar S/R-18, P-28Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
9 x 1.5 sq.mm
Metre44
Sl.No.1.20.10 E.Deptt. Bihar S/R-18, P-28Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
1 x 1.5 sq.mm
Metre47
Sl.No.1.20.11 E.Deptt. Bihar S/R-18, P-28Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
2 x 2.5 sq.mm
Metre13
Sl.No.1.20.12 E.Deptt. Bihar S/R-18, P-28Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
3 x 2.5 sq.mm
Metre19
Sl.No.1.20.13 E.Deptt. Bihar S/R-18, P-28Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
4 x 2.5 sq.mm
Metre23
Sl.No.1.20.14 E.Deptt. Bihar S/R-18, P-28Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
5 x 2.5 sq.mm
Metre30
Sl.No.1.20.15 E.Deptt. Bihar S/R-18, P-28Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
6 x 2.5 sq.mm
Metre33
Sl.No.1.20.16 E.Deptt. Bihar S/R-18, P-28Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
7 x 2.5 sq.mm
Metre42
Sl.No.1.20.17 E.Deptt. Bihar S/R-18, P-28Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
8 x 2.5 sq.mm
Metre46
Sl.No.1.20.18 E.Deptt. Bihar S/R-18, P-28Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
9 x 2.5 sq.mm
Metre55
Sl.No.1.20.19 E.Deptt. Bihar S/R-18, P-28Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
9 x 2.5 sq.mm
Metre59
Sl.No.1.20.20 E.Deptt. Bihar S/R-18, P-29Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
1 x 4 sq.mm
Metre22
Sl.No.1.20.21 E.Deptt. Bihar S/R-18, P-29Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
3 x 4 sq.mm
Metre27
Sl.No.1.20.29 E.Deptt. Bihar S/R-18, P-30Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
2 x 6 sq.mm
Metre34
Sl.No.1.20.30 E.Deptt. Bihar S/R-18, P-30Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required.
3 x 6 sq.mm
Metre44
Code No. 1.21.1 E. Deptt. Bihar S/R-18, P-29Supplying and fixing of 20mm sizes of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.Metre55
Code No. 1.21.2 E. Deptt. Bihar S/R-18, P-29Supplying and fixing of 25mm sizes of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.Metre69
Code No. 1.21.3 E. Deptt. Bihar S/R-18, P-29Supplying and fixing of 32mm sizes of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.Metre109
Code No. 1.21.4 E. Deptt. Bihar S/R-18, P-29Supplying and fixing of 40mm sizes of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.Metre137
Code No. 1.21.5 E. Deptt. Bihar S/R-18, P-29Supplying and fixing of 50mm sizes of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.Metre218
Sl.No.1.22.1 E.Deptt. Bihar S/R-18, P-30Supplying and fixing metal/PVC box of following sizes (nominal size) on surface or in recess with suitable size of phanolic laminated sheet cover in front including painting etc. as required.
75 mm x 75 mm x 50 mm deep
Each93
Sl.No.1.22.2 E.Deptt. Bihar S/R-18, P-30Supplying and fixing metal/PVC box of following sizes (nominal size) on surface or in recess with suitable size of phanolic laminated sheet cover in front including painting etc. as required.
100 mm x 100 mm x 60 mm deep
Each140
Sl.No.1.22.3 E.Deptt. Bihar S/R-18, P-30Supplying and fixing metal/PVC box of following sizes (nominal size) on surface or in recess with suitable size of phanolic laminated sheet cover in front including painting etc. as required.
150 mm x 75 mm x 60 mm deep
Each116
Sl.No.1.22.4 E.Deptt. Bihar S/R-18, P-30Supplying and fixing metal/PVC box of following sizes (nominal size) on surface or in recess with suitable size of phanolic laminated sheet cover in front including painting etc. as required.
150 mm x 150 mm x 60 mm deep
Each166
Sl.No.1.22.5 E.Deptt. Bihar S/R-18, P-30Supplying and fixing metal/PVC box of following sizes (nominal size) on surface or in recess with suitable size of phanolic laminated sheet cover in front including painting etc. as required.
180 mm x 100 mm x 60 mm deep
Each132
Sl.No.1.22.6 E.Deptt. Bihar S/R-18, P-30Supplying and fixing metal/PVC box of following sizes (nominal size) on surface or in recess with suitable size of phanolic laminated sheet cover in front including painting etc. as required.
200 mm x 150 mm x 60 mm deep
Each193
Sl.No.1.22.7 E.Deptt. Bihar S/R-18, P-30Supplying and fixing metal/PVC box of following sizes (nominal size) on surface or in recess with suitable size of phanolic laminated sheet cover in front including painting etc. as required.
200 mm x 250 mm x 60 mm deep
Each259
Sl.No.1.22.9 E.Deptt. Bihar S/R-18, P-30Supplying and fixing metal/PVC box of following sizes (nominal size) on surface or in recess with suitable size of phanolic laminated sheet cover in front including painting etc. as required.
250 mm x 300 mm x 60 mm deep
Each372
Sl.No.1.22.8 E.Deptt. Bihar S/R-18, P-30Supplying and fixing metal/PVC box of following sizes (nominal size) on surface or in recess with suitable size of phanolic laminated sheet cover in front including painting etc. as required.
200 mm x 300 mm x 60 mm deep
Each321
Sl.No.1.23.1 E.Deptt. Bihar S/R-18, P-30Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 ampsEach39
Sl.No.1.23.3 E.Deptt. Bihar S/R-18, P-28Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 15/16 ampsEach83
Sl.No.1.23.4 E.Deptt. Bihar S/R-18, P-30Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps, 3 pin socket outletEach52
Sl.No.1.23.6 E.Deptt. Bihar S/R-18, P-30Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 15/16 amps, 6 pin S.S.combinedEach62
Sl.No.1.23.7 E.Deptt. Bihar S/R-18, P-31Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. Telephone socket with shutter outletEach52
Sl.No.1.23.8 E.Deptt. Bihar S/R-18, P-32Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. T.V, antenna socket outletEach44
Sl.No.1.23.9 E.Deptt. Bihar S/R-18, P-30Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. Electronic step fan regulator, mini.Each219
Sl.No.1.24.1 E.Deptt. Bihar S/R-18, P-31Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection but excluding modular plate etc. as required.
5/6 amps switch
Each81
Sl.No.1.24.2 E.Deptt. Bihar S/R-18, P-31Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection but excluding modular plate etc. as required.
2 way, 5/6 amps switch
Each111
Sl.No.1.24.3 E.Deptt. Bihar S/R-18, P-31Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection but excluding modular plate etc. as required.
15/16 amps switch
Each134
Sl.No.1.24.4 E.Deptt. Bihar S/R-18, P-31Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection bu excluding modular plate etc. as required.
3 pin , 5/6 amps socket outlet
Each122
Sl.No.1.24.5 E.Deptt. Bihar S/R-18, P-31Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection bu excluding modular plate etc. as required.
16/20 amps, 6 pin socket outlet
Each171
Sl.No.1.24.6 E.Deptt. Bihar S/R-18, P-31Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection bu excluding modular plate etc. as required.
Telephone socket outlet
Each103
Sl.No.1.24.7 E.Deptt. Bihar S/R-18, P-31Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection bu excluding modular plate etc. as required.
TV antenna socket outlet
Each102
Sl.No.1.25 E.Deptt. Bihar S/R-18, P-31Supplying and fixing stepped type electronic fan regulatoron th existing modular plate switch box including connections but excluding modular plate etc. as required.Each359
Sl.No.1.26 E.Deptt. Bihar S/R-18, P-31Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required.Each24
Sl.No.1.27.1 E.Deptt. Bihar S/R-18, P-31Supplying and fixing following size/modules G.I. box along with modular base & cover plate for modular switches in recess etc. as required.
1 ro 2 modular (78mm x 78mm x 45mm)
Each167
Sl.No.1.27.2 E.Deptt. Bihar S/R-18, P-31Supplying and fixing following size/modules G.I. box along with modular base & cover plate for modular switches in recess etc. as required.
3 modular (78mm x 100mm x 45mm)
Each192
Sl.No.1.27.3 E.Deptt. Bihar S/R-18, P-32Supplying and fixing following size/modules G.I. box along with modular base & cover plate for modular switches in recess etc. as required.
4/5 modular (78mm x 140mm x 50mm)
Each214
Sl.No.1.27.4 E.Deptt. Bihar S/R-18, P-32Supplying and fixing following size/modules G.I. box along with modular base & cover plate for modular switches in recess etc. as required.
6 modular (78mm x 205mm x 50mm)
Each270
Sl.No.1.27.5 E.Deptt. Bihar S/R-18, P-32Supplying and fixing following size/modules G.I. box along with modular base & cover plate for modular switches in recess etc. as required.
8/9 modular (78mm x 230mm x 60mm)
Each339
Sl.No.1.27.6 E.Deptt. Bihar S/R-18, P-32Supplying and fixing following size/modules G.I. box along with modular base & cover plate for modular switches in recess etc. as required.
12 modular (135mm x 205mm x 60mm)
Each410
Sl.No.1.28.1 E.Deptt. Bihar S/R-18, P-32Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required.
1 module
Each79
Sl.No.1.28.2 E.Deptt. Bihar S/R-18, P-32Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required.
2 module
Each81
Sl.No.1.28.3 E.Deptt. Bihar S/R-18, P-32Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required.
3 module
Each93
Sl.No.1.28.4 E.Deptt. Bihar S/R-18, P-32Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required.
4 module
Each103
Sl.No.1.28.5 E.Deptt. Bihar S/R-18, P-32Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required.
6 module
Each133
Sl.No.1.28.6 E.Deptt. Bihar S/R-18, P-32Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required.
8 module
Each174
Sl.No.1.28.7 E.Deptt. Bihar S/R-18, P-32Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required.
12 module
Each213
Code No. 1.29 E. Deptt. Bihar S/R-18, P-32Supplying and fixing suitable size metal./pvc. box of 150 mm x 75 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connections, painting etc. as required.Each187
Sl.No. 1.30
E.Deptt. Bihar S/R-18,P-33
Supplying and fixing suitable size metal./pvc. box of 180 mm x 100 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connections, painting etc. as required.Each286
Sl.No.1.31 E.Deptt. Bihar S/R-18, P-33Supplying and fixing suitable size G.I. Box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection etc. as required.Each362
Sl.No.1.32 E.Deptt. Bihar S/R-18, P-33Supplying and fixing suitable size G.I. Box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch connection, painting etc. as required.Each413
Code No. 1.33 E. Deptt. Bihar S/R-18, P-33Supplying and fixing 2 Pin, 6 amps ceilling rose on the existing Junction box / wooden block including connection etc. as required.Each42
Code No. 1.34 E. Deptt. Bihar S/R-18, P-33Supplying and fixing batten/ angle holder including connection etc. as required.Each46
Code No. 1.35 E. Deptt. Bihar S/R-18, P-34Erection of wall bracket/ ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required.Each46
Code No. 1.36 E. Deptt. Bihar S/R-18, P-34Supplying and fixing call bell/buzzer suitable for single phase, 230 volts, complete as required.Each80
Code No. 1.37 E. Deptt. Bihar S/R-18, P-34Supplying and fixing ding dong call bell suitable for single phase, 230 volts, complete as rerquired.Each138
Code No. 1.38 E. Deptt. Bihar S/R-18, P-34Supplying and fixing electronic musical call bell suitable for single phase, 230 volt complete bell as required.Each219
Code No. 1.39 E. Deptt. Bihar S/R-18, P-34Providing and fixing plain 16/0.20 mm (0.50 sq.mm) twin, flexible, FR PVC insulated, copper cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required.Metre18
Code No. 1.40 E. Deptt. Bihar S/R-18, P-34Providing and fixing plain 16/0.20 mm (0.50 sq.mm) twin,circular flexible, FR PVC insulated, PVC sheathed copper cable, direct on the wall with PVC clips etc. as required.Metre23
Code No. 1.41 E. Deptt. Bihar S/R-18, P-34Installation, testing and commissioning of pre-wires, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directy on ceiling/ wall, including connection with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.Each84
Code No1.42 E.Deppt.Bihar S/R-18 P-35Installation, testing and commissioning of pre-wired fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia x 1.6 mm thick G.I.pipe up to 30 cm length, painting and wiring the down rods and connection with 1.5 qu. mm. FR PVC insulated, copper conductor, single core cable and earthing etc. as required.Each333
Code No. 1.43 E. Deptt. Bihar S/R-18, P-35Providing and fixing extra conduit down rod of 20 mm dia, 2 x 10 cm length wiring with 2 x 1.5 sq.mm FR PVC insulated, copper conductor, single core cable including painting etc. as required. (Note: more than 5 cm. length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored).Each53
Code No1.44 E.Deppt.Bihar S/R-18 P-35I.T.C of ceiling fan including wiring the down rods of stndard length (Upto30 cm) with 1.5 sq FR PVC insulated, copper conductor, single core cable etc.as required.Each85
Code No1.45
E.Deppt.Bihar S/R-18 P-35
I.T.C of ceiling fan including wiring the down rods of stndard length (Upto30 cm) with 1.5 sq FR PVC insulated, copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.Each119
Code No1.46
E.Deppt.Bihar S/R-18 P-36
I.T.C of Resistance type ceiling fan regulator, in existing swich box including connection with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable, earthing the regulator etc. as required.Each36
Code No1.47
E.Deppt.Bihar S/R-18 P-37
Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy guage including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored).Each35
Code No1.48
E.Deppt.Bihar S/R-18 P-38
Supplying and fixing extra down rod of 10 cm length G.I. pipe, 20 mm dia, heavy guage including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored).Each38
Code No1.49
E.Deppt.Bihar S/R-18 P-39
Numbering of ceiling fan/exhaust fan/ fluorescent fittings as required.Each26
Code No1.50.1 E.Deppt.Bihar S/R-18 P-36Installation of exhaust fan in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as requiredupto 450 mm sweepEach151
Code No1.50.2 E.Deppt.Bihar S/R-18 P-37Installation of exhaust fan in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as requiredupto 510 mm sweepEach203
Code No1.51
E.Deppt.Bihar S/R-18 P-32
Extra for fixing the louvers/shutters complete with frame for a exhaust fan of all sizes.Each59
Code No1.52
E.Deppt.Bihar S/R-18 P-33
Painting of ceiling fan in installed position with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent etc. as required.Each66
Sl. No. 2.1.1 E.Deptt Bihar S/R-18, P-37Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with rewireable type fuses, including drilling holes in metal board, making connections etc. as required.
16 Amp double pole
Each550
Sl. No. 2.1.2 E.Deptt Bihar S/R-18, P-37Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with rewireable type fuses, including drilling holes in metal board, making connections etc. as required.
32 Amp double pole
Each1153
Sl. No. 2.1.3 E.B.C Deptt Bihar S/R-18, P-37Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with rewireable type fuses, including drilling holes in metal board, making connections etc. as required.
63 Amp double pole
Each2838
Sl. No. 2.1.4 E.Deptt Bihar S/R-18, P-37Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with rewireable type fuses, including drilling holes in metal board, making connections etc. as required.
32 Amp TP&N
Each1938
E.Deptt. Sl.No.- 2.1.5 P-37 Govt of BiharProviding and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with rewireable type fuses, including drilling holes in metal board, making connections etc. as required.
63Amp TP&N
Each3752
Sl. No. 2.1.6 E.Deptt Bihar S/R-18, P-37Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with rewireable type fuses, including drilling holes in metal board, making connections etc. as required.
100 Amp TP&N
Each6768
E.Deptt. Sl.No.- 2.1.7 P-37 Govt of BiharProviding and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with rewireable type fuses, including drilling holes in metal board, making connections etc. as required.
200Amp TP&N
Each11162
E.Deptt. Sl.No.- 2.1.8 P-37 Govt of BiharProviding and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with rewireable type fuses, including drilling holes in metal board, making connections etc. as required.
320Amp TP&N
Each16017
E.Deptt. Sl.No.- 2.2.1 P-37 Govt of BiharProviding and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with ISI marked HRC fuse, including drilling holes in metal board, making connections etc. as required.
63 Amp TP&N,HRC
Each4219
E.Deptt. Sl.No.- 2.2.2 P-37 Govt of BiharProviding and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with ISI marked HRC fuse, including drilling holes in metal board, making connections etc. as required.
100 Amp TP&N,HRC
Each7812
E.Deptt. Sl.No.- 2.2.3 P-37 Govt of BiharProviding and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with ISI marked HRC fuse, including drilling holes in metal board, making connections etc. as required.
200 Amp TP&N,HRC
Each12466
E.Deptt. Sl.No.- 2.2.4 P-37 Govt of BiharProviding and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with ISI marked HRC fuse, including drilling holes in metal board, making connections etc. as required.
320 Amp TP&N,HRC
Each14922
E.Deptt. Sl.No.- 2.2.5 P-37 Govt of BiharProviding and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with ISI marked HRC fuse, including drilling holes in metal board, making connections etc. as required.
400 Amp TP&N,HRC
Each22378
E.Deptt. Sl.No.- 2.2.6 P-37 Govt of BiharProviding and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with ISI marked HRC fuse, including drilling holes in metal board, making connections etc. as required.
500 Amp TP&N,HRC
Each30120
E.Deptt. Sl.No.- 2.2.7 P-37 Govt of BiharProviding and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with ISI marked HRC fuse, including drilling holes in metal board, making connections etc. as required.
800 Amp TP&N,HRC
Each37503
E.Deptt. Sl.No.- 2.3.1. P-38 Govt of BiharProviding and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 32 amps TP&NEach1490
E.Deptt. Sl.No.- 2.3.2. P-38 Govt of BiharProviding and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 63 amps TP&NEach2124
E.Deptt. Sl.No.- 2.3.3. P-38 Govt of BiharProviding and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 100 amps TP&NEach4449
E.Deptt. Sl.No.- 2.3.4. P-38 Govt of BiharProviding and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 125 amps TP&NEach4761
E.Deptt. Sl.No.- 2.3.5. P-38 Govt of BiharProviding and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 160 amps TP&NEach5754
E.Deptt. Sl.No.- 2.3.6. P-38 Govt of BiharProviding and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 200 amps TP&NEach6710
E.Deptt. Sl.No.- 2.3.7. P-38 Govt of BiharProviding and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 250 amps TP&NEach8124
E.Deptt. Sl.No.- 2.3.8. P-38 Govt of BiharProviding and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 320 amps TP&NEach10820
E.Deptt. Sl.No.- 2.3.9. P-38 Govt of BiharProviding and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 400 amps TP&NEach12574
E.Deptt. Sl.No.- 2.3.10. P-38 Govt of BiharProviding and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 630 amps TP&NEach22459
E.Deptt. Sl.No.- 2.4.1 P-38 Govt of BiharProviding and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required.
25/100 amps, 10 KA
Each2158
E.Deptt. Sl.No.- 2.4.2 P-38 Govt of BiharProviding and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required..
25/100 amps, 16 KA
Each3254
E.Deptt. Sl.No.- 2.4.3 P-38 Govt of BiharProviding and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required.
125 amps, 16 KA
Each4004
E.Deptt. Sl.No.- 2.4.4 P-38 Govt of BiharProviding and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required.
160 amps, 35 KA
Each9787
E.Deptt. Sl.No.- 2.4.5 P-38 Govt of BiharProviding and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required.
200 amps, 35 KA
Each11915
E.Deptt. Sl.No.- 2.4.6 P-38 Govt of BiharProviding and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required.
250 amps, 35 KA
Each14598
E.Deptt. Sl.No.- 2.4.7 P-38 Govt of BiharProviding and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required.
315 amps, 35 KA
Each17957
E.Deptt. Sl.No.- 2.4.8 P-38 Govt of BiharProviding and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required.
400 amps, 35 KA
Each19697
E.Deptt. Sl.No.- 2.4.9 P-38 Govt of BiharProviding and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required.
500 amps, 35 KA
Each23084
E.Deptt. Sl.No.- 2.4.10 P-34 Govt of BiharProviding and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required.
630 amps, 35/50 KA
Each24910
E.Deptt. Sl.No.- 2.4.11 P-34 Govt of BiharProviding and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required.
800 amps, 35/50 KA
Each30139
Sl. No. 2.5.1 E.Deptt Bihar S/R-18, P-39Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required.
63 Amps.
Each2861
Sl. No. 2.5.2 E.Deptt Bihar S/R-18, P-39Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required.
100 Amps.
Each3684
Sl. No. 2.5.3 E.Deptt Bihar S/R-18, P-39Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required.
200 Amps.
Each7742
Sl. No. 2.5.4 E.Deptt Bihar S/R-18, P-40Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required.
300 Amps.
Each9546
Sl. No. 2.5.5E.Deptt Bihar S/R-18, P-39Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required.
400 Amps.
Each15655
Sl. No. 2.5.6E.Deptt Bihar S/R-18, P-39Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required.
500 Amps.
Each19549
Sl. No. 2.5.7E.Deptt Bihar S/R-18, P-40Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required.
600 Amps.
Each24411
Sl. No. 2.5.8E.Deptt Bihar S/R-18, P-40Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required.
800 Amps.
Each25359
Sl.No.2.6.1 E.Deptt. Bihar S/R-18, P-39Providing and fixing following capacity double pole/ 4 pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal metal panel, making connection etc. as required.
32 amps, double pole
Each1206
Sl.No.2.6.2 E.Deptt. Bihar S/R-18, P-39Providing and fixing following capacity double pole/ 4 pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal metal panel, making connection etc. as required.
63 amps, double pole
Each2236
Sl.No.2.6.3 E.Deptt. Bihar S/R-18, P-39Providing and fixing following capacity double pole/ 4 pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal metal panel, making connection etc. as required.
32 amps, four pole
Each1948
Sl. No. 2.6.4 E.Deptt Bihar S/R-18, P-39Providing and fixing following capacity double pole/ 4 pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal metal panel, making connection etc. as required.
63amps, four Pole
Each4176
Sl. No. 2.6.5 E.Deptt Bihar S/R-18, P-40Providing and fixing following capacity double pole/ 4 pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal metal panel, making connection etc. as required.
100amps, four Pole
Each7814
Sl. No. 2.6.6E.Deptt Bihar S/R-18, P-40Providing and fixing following capacity double pole/ 4 pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal metal panel, making connection etc. as required.
200amps, four Pole
Each11831
Sl. No. 2.6.7E.Deptt Bihar S/R-18, P-41Providing and fixing following capacity double pole/ 4 pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal metal panel, making connection etc. as required.
320amps, four Pole
Each15238
Sl. No. 2.6.8E.Deptt Bihar S/R-18, P-42Providing and fixing following capacity double pole/ 4 pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal metal panel, making connection etc. as required.
400amps, four Pole
Each17529
Sl. No. 2.6.9E.Deptt Bihar S/R-18, P-43Providing and fixing following capacity double pole/ 4 pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal metal panel, making connection etc. as required.
630amps, four Pole
Each35661
E.Deptt. Sl.No.- 2.7.1 P-40 Govt of BiharProviding and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required.
40 amps, four pole
Each3503
E.Deptt. Sl.No.- 2.7.2 P-40 Govt of BiharProviding and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required.
.63 amps, four pole
Each3716
E.Deptt. Sl.No.- 2.7.3 P-40 Govt of BiharProviding and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required.
.100 amps, four pole
Each4878
E.Deptt. Sl.No.- 2.7.4 P-40 Govt of BiharProviding and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required.
125 amps, four pole
Each7252
E.Deptt. Sl.No.- 2.7.5 P-40 Govt of BiharProviding and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required.
160 amps, four pole
Each7903
E.Deptt. Sl.No.- 2.7.6 P-40 Govt of BiharProviding and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required.
.200 amps, four pole
Each9463
E.Deptt. Sl.No.- 2.7.7 P-40 Govt of BiharProviding and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required.
250 amps, four pole
Each11636
E.Deptt. Sl.No.- 2.7.8 P-40 Govt of BiharProviding and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required.
320 amps, four pole
Each14514
E.Deptt. Sl.No.- 2.7.9 P-40 Govt of BiharProviding and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required.
400 amps, four pole
Each21116
E.Deptt. Sl.No.- 2.7.10 P-40 Govt of BiharProviding and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required.
630 amps, four pole
Each24806
E.Deptt. Sl.No.- 2.8.1 P-40 Govt of BiharSupplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface recess, complete with tinned copper bus bar, neatral busbar, earth bar din bar interconnections, powder painted including earthing etc. as required (But without MCB/RCCB/Isolator)
2+4 Way. single door
Each633
E.Deptt. Sl.No.- 2.8.2 P-40 Govt of BiharSupplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface recess, complete with tinned copper bus bar, neatral busbar, earth bar dinbar detachable gland plate, interconnections, Phosphatised and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator)
2+6 Way. single door
Each671
Sl. No. 2.8.3 E.Deptt Bihar S/R-18, P-40Supplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface recess, complete with tinned copper bus bar, neatral busbar, earth bar dinbar detachable gland plate, interconnections, Phosphatised and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator)
2+8 way single door
Each741
Sl. No. 2.8.4 E.Deptt Bihar S/R-18, P-40Supplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface recess, complete with tinned copper bus bar, neatral busbar, earth bar dinbar detachable gland plate, interconnections, Phosphatised and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator)
2+10 way single door
Each887
Sl. No. 2.8.5 E.Deptt Bihar S/R-18, P-40Supplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface recess, complete with tinned copper bus bar, neatral busbar, earth bar dinbar detachable gland plate, interconnections, Phosphatised and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator)
2+12 way single door
Each949
Sl. No. 2.8.6 E.Deptt Bihar S/R-18, P-40Supplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface recess, complete with tinned copper bus bar, neatral busbar, earth bar dinbar detachable gland plate, interconnections, Phosphatised and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator)
2+4 way double door
Each1004
Sl. No. 2.8.7 E.Deptt Bihar S/R-18, P-40Supplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface recess, complete with tinned copper bus bar, neatral busbar, earth bar dinbar detachable gland plate, interconnections, Phosphatised and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator)
2+6 way double door
Each1081
Sl. No. 2.8.8 E.Deptt Bihar S/R-18, P-40Supplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface recess, complete with tinned copper bus bar, neatral busbar, earth bar dinbar detachable gland plate, interconnections, Phosphatised and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator)
2+8 way double door
Each1242
Sl. No. 2.8.9 E.Deptt Bihar S/R-18, P-40Supplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface recess, complete with tinned copper bus bar, neatral busbar, earth bar dinbar detachable gland plate, interconnections, Phosphatised and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator)
2+12 way double door
Each1315
Code No. 2.9.1 E. Deptt. Bihar S/R-18, P-41Suppling and fixing following way horizontal type three pole and neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnection, powder painted including eathing, etc. as required (But without MCB/RECB./ Isolator)
4 way (4+12) single door horizontal type
Each1680
Code No. 2.9.2 E. Deptt. Bihar S/R-18, P-41Suppling and fixing following way horizontal type three pole and neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnection, powder painted including eathing, etc. as required (But without MCB/RECB./ Isolator)
6 way (4+18) single door horizontal type
Each1961
Code No. 2.9.3 E. Deptt. Bihar S/R-18, P-41Suppling and fixing following way horizontal type three pole and neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnection, powder painted including eathing, etc. as required (But without MCB/RECB./ Isolator)
8 way (4+24) single door horizontal type
Each2152
Sl. No. 2.9.4 E.Deptt Bihar S/R-18, P-40Suppling and fixing following way horizontal type three pole and neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnection, powder painted including eathing, etc. as required (But without MCB/RECB./ Isolator)-4way (4+12) double door horizontal typeEach2388
Sl. No. 2.9.5 E.Deptt Bihar S/R-18, P-40Suppling and fixing following way horizontal type three pole and neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnection, powder painted including eathing, etc. as required (But without MCB/RECB./ Isolator)-6way (4+18) double door horizontal typeEach2905
Sl. No. 2.9.6 E.Deptt Bihar S/R-18, P-40Suppling and fixing following way horizontal type three pole and neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnection, powder painted including eathing, etc. as required (But without MCB/RECB./ Isolator)-8way (4+24) double door horizontal typeEach3702
Code No2.10.1 E0Deptt.Bihar S/R-18 P-42Supplying and fixing following ways, surface/recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amp tinned copper bus bar, common neutral link, earth bar, din bar, for mounting MCB's (but without MCB's and incomer) as required. (Note :Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
4 way (8+12), Single door, Vertical type
Each5920
Code No2.10.2 E0Deptt.Bihar S/R-18 P-42Supplying and fixing following ways, surface/recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amp tinned copper bus bar, common neutral link, earth bar, din bar, for mounting MCB's (but without MCB's and incomer) as required. (Note :Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
8 way (8+24), Single door, Vertical type
Each7851
Code No2.10.3 E0Deptt.Bihar S/R-18 P-43Supplying and fixing following ways, surface/recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amp tinned copper bus bar, common neutral link, earth bar, din bar, for mounting MCB's (but without MCB's and incomer) as required. (Note :Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
12 way (8+36), Single door, Vertical type
Each9523
Code No2.10.4 E0Deptt.Bihar S/R-18 P-44Supplying and fixing following ways, surface/recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amp tinned copper bus bar, common neutral link, earth bar, din bar, for mounting MCB's (but without MCB's and incomer) as required. (Note :Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
4 way (8+12), Double door, Vertical type
Each7749
Code No2.10.5 E0Deptt.Bihar S/R-18 P-45Supplying and fixing following ways, surface/recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amp tinned copper bus bar, common neutral link, earth bar, din bar, for mounting MCB's (but without MCB's and incomer) as required. (Note :Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
8 way (8+24), Double door, Vertical type
Each8932
Code No2.10.6 E0Deptt.Bihar S/R-18 P-46Supplying and fixing following ways, surface/recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amp tinned copper bus bar, common neutral link, earth bar, din bar, for mounting MCB's (but without MCB's and incomer) as required. (Note :Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
12 way (8+36), Double door, Vertical type
Each10514
Sl. No. 2.12.1 E.Deptt Bihar S/R-18, P-42Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required.
6/32 amps, Single Pole
Each192
Sl. No. 2.12.2 E.Deptt Bihar S/R-18, P-43Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required.
6/32 amps, SPN
Each511
Sl. No. 2.12.3 E.Deptt Bihar S/R-18, P-42Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required.
40 amps, Single Pole and neutral
Each729
Sl. No. 2.12.4 E.Deptt Bihar S/R-18, P-42Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required.
50/63 amps, Single pole and neutral
Each825
Sl. No. 2.12.5 E.Deptt Bihar S/R-18, P-42Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required.
6/32 amps,Tripole pole and neutral
Each1108
Sl. No. 2.12.6 E.Deptt Bihar S/R-18, P-42Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required.
40 amps, Tripole pole and neutral
Each1487
Sl. No. 2.12.7 E.Deptt Bihar S/R-18, P-42Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required.
50/63 amps, Tripole pole and neutral
Each1635
Sl. No. 2.13.1 E.Deptt Bihar S/R-18, P- 43Supplying and fixing following rating, double pole, 240 volts "C" series, mainiature circuit breaker suitable for inductive load in the existing MCB, DB, complete with connections testing and commissioning etc. as required.
6/32 amps, Double pole
Each632
Sl. No. 2.13.2 E.Deptt Bihar S/R-18, P- 43Supplying and fixing following rating, double pole, 240 volts "C" series, mainiature circuit breaker suitable for inductive load in the existing MCB, DB, complete with connections testing and commissioning etc. as required.
40 amps, Double pole
Each860
Sl. No. 2.13.3 E.Deptt Bihar S/R-18, P- 43Supplying and fixing following rating, double pole, 240 volts "C" series, mainiature circuit breaker suitable for inductive load in the existing MCB, DB, complete with connections testing and commissioning etc. as required.
50/63 amps, Double pole
Each919
Sl. No. 2.14 E.Deptt Bihar S/R-18, P- 43Supplying and fixing single pole blaning Plate in existing MCB DB complete etc as required.Each16
Sl. No. 2.15.1 E.Deptt Bihar S/R-18, P-43Supplying and fixing following rating double pole, 240 voltas Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
40 Amps
Each355
Sl. No. 2.15.2 E.Deptt Bihar S/R-18, P-43Supplying and fixing following rating double pole, 240 voltas Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
63 Amps
Each455
Sl. No. 2.16.1 E.Deptt Bihar S/R-18, P-43Supplying and fixing following rating four pole, 415 voltas Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 ampsEach495
Sl. No. 2.16.2 E.Deptt Bihar S/R-18, P-43Supplying and fixing following rating four pole, 415 voltas Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 ampsEach746
Sl. No. 2.16.3 E.Deptt Bihar S/R-18, P-43Supplying and fixing following rating four pole, 415 voltas Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 80/100 ampsEach1022
Sl. No. 2.17.2 E.Deptt Bihar S/R-18, P-44Supplying and fixing following rating double pole,(single phase and neutral), 240 volts residual current circuit breaker (RCCB), having a sensitivity current up to 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 ampsEach2180
Sl. No. 2.18.1 E.Deptt Bihar S/R-18, P-45Supplying and fixing following rating, TP&N, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 16/25 amps.Each2595
Sl. No. 2.18.2 E.Deptt Bihar S/R-18, P-44Supplying and fixing following rating, TP&N, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.Each2620
Sl. No. 2.18.3 E.Deptt Bihar S/R-18, P-44Supplying and fixing following rating, TP&N, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps.Each2941
Code No. 2.19 E. Deptt. Bihar S/R-18, P-44Suppling and fixing 20 Amps 240 volt. SPN industrial type socket out let, with 2 pole and earth, metal enclosed plug tope along with 20 amps "C" curves, SP. MCB, in sheet steel enclosure on surface or in recess, with chained metel cover for the socket out let and complete with connection testing and commissioning etc. as required.Each996
Sl. No. 2.20 E.Deptt Bihar S/R-18, P-45Providing and fixing M.V. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required.Each178
Sl. No. 2.21 E.Deptt Bihar S/R-18, P-46Providing and fixing H.T.. danger notice plate of 250 mm x 200 mm, made of mild steel, at least 2 mm thick, vitreous enamelled white on both sides and with inscription in single red colour on front side as required.Each220
Sl. No. 2.22 E.Deptt Bihar S/R-18, P-45Supplying and fixing wall mounted metal board of welded construction, fabricated with minimum 35 mm x 35 mm x 6 mm angle iron frame work, with 25 mm x 6 mm flat iron as intermediate members including painting etc. as required.Sq.
mtr
3087
Sl. No. 2.23 E.Deptt Bihar S/R-18, P-45Supplying and fixing wall mounted metal board of welded construction, fabricated with minimum 25mm x 25mm x 3mm angle iron frame work, with 20mm x 3mm flat iron as intermediate members including painting etc. as required.Sq.
mtr
1714
Sl. No. 2.24 E.Deptt Bihar S/R-18, P-45Supplying and fixing wall mounted board of welded construction, fabricated with minimum 25 mm x 4 mm angle iron frame work, with intermediate members same size including painting etc. as required.Sq.
mtr
1631
Sl. No. 2.25 E.Deptt Bihar S/R-18, P-39Supplying and fixing 20 amps, 415 volts, TPN industrial type, socket outlet with 4 pole and earth, metal enclosed plug top alongwith 30 amps "C" curve, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.Each1912
Sl. No. 2.26 E.Deptt Bihar S/R-18, P-41Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 amps "C" curve, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.Each3157
Sl. No. 3.1 E.Deptt Bihar S/R-18, P-46Earthing with GI earth pipe 4.5 meter long and 40 mm dia including accessories, and providing masonary enclosures with cover plate having locking arrangment and watering pipe etc. as required (But without charcoal or coke and salt) .Per
Set
3196
Sl. No. 3.2 E.B.C Deptt Bihar S/R-18, P-46Earthing with GI earth pipe 4.5 meter long and 40 mm dia including accessories, and providing masonary enclosures with cover plate having locking arrangment and watering pipe etc.with charcoal and salt as required .Per
Set
5125
Sl. No. 3.3 E.Deptt Bihar S/R-18, P-46Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. ( but without charcoal/ coke and salt ) as required.Per
Set
3785
Sl.No.3.4 E.Deptt. Bihar S/R-18, P-46Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required.Per
Set
6276
Sl.No.3.5 E.Deptt. Bihar S/R-18, P-46Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc.(but without charcoal or coke and salt) as required.Per
Set
10341
Sl.No.3.6 E.Deptt. Bihar S/R-18, P-46Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/coke and salt as requiredPer
Set
12831
Sl. No. 3.7 E.Deptt Bihar S/R-18, P-41Supplying and laying 6 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including connection/termination with GI thimble as required.Metre17
Sl. No. 3.8 E.Deptt Bihar S/R-18, P-42Supplying and laying 25 mm x 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ termination with nut, bolt, spring, washer etc.as required (jointing shall be done by overlapping with 2 sets of brass nut bolt and & spring washer spaced at 50 mm)Metre898
Sl. No. 3.9 E.Deptt Bihar S/R-18, P-42Supplying and laying 25 mm x 6 mm G.I. strip at 0.50 metre below ground as strip earth electrode, including connection/ termination with GI nut, bolt, spring, washer etc.as required (jointing shall be done by overlapping with 2 sets of G.I. nut bolt and & spring washer spaced at 50 mm)Metre108
Sl. No. 3.9 E.Deptt Bihar S/R-09, P-47
Old SR
Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required.Metre108
Sl. No. 3.10 E.Deptt Bihar S/R-18, P-42Supplying and laying 25 mm x 5 mm copper strip at 40 mm dia G.I. pipe from earth electrode, including connection with brass nut, bolt, spring, washer excavation and refilling etc.as requiredMetre1286
Sl. No. 3.11 E.Deptt Bihar S/R-18, P-42Supplying and laying 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode, including connection with G.I. nut, bolt, spring, washer excavation and refilling etc.as requiredMetre487
Sl. No. 3.12 E.B.C. Deptt Bihar S/R-18, P-42Providing and laying earth connection from earth electrode with 6 SWG dia G.I.wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and refilling etc. as required.Metre192
Sl. No. 3.13 E.Deptt Bihar S/R-18, P-42Supplying and laying earth connections from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and rifilling etc. as required.Metre269
Sl. No. 3.14 E.Deptt Bihar S/R-18, P-42Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connection etc. as required.Metre1032
Sl. No. 3.15 E.Deptt Bihar S/R-18, P-42Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required.Metre150
Sl. No. 3.16 E.Deptt Bihar S/R-18, P-42Providing and fixing 6 SWG dia G.I.wire on surface or in recess for loop earthing as required.Metre38
Sl. No. 3.17 E.Deptt Bihar S/R-18, P-42Providing and and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.Metre116
Sl. No. 3.18 E.Deptt Bihar S/R-18, P-43Providing and fixing 6 SWG dia G.I.wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/cable as required.Metre23
Sl. No. 3.19 E.Deptt Bihar S/R-18, P-43Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.Metre102
Sl. No. 3.20 E.Deptt Bihar S/R-18, P-43Providing and fixiing earth bus of 50 mm x 5 mm copper strip on surface for connection etc. as required.Mtr.1963
Sl. No. 3.21 E.Deptt Bihar S/R-18, P-43Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc.as required.Set16586
Sl. No. 4.1 E.Deptt Bihar S/R-18, P-44Providing and fixing of lightning conductor final made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes tec. Complete as required.Each930
Sl. No. 4.2 E.Deptt Bihar S/R-18, P-44Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I.base plate including holes etc. complete as required.Each188
Sl. No. 4.3 E.Deptt Bihar S/R-18, P-44Fixing of lighting conductor finial (single prong) with base plate including holes etc. as required.Each154
Sl. No. 4.4 E.Deptt Bihar S/R-18, P-44Jointing copper/ G.I. tape (with another copper/G.I. tape, base of the final or any other metallic object) by riverting/ nut bolting sweating and soldering etc. as required.Each87
Sl. No. 4.5 E.Deptt Bihar S/R-18, P-44Providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For Horizontal run)Metre446
Sl. No. 4.6 E.Deptt Bihar S/R-18, P-44Providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For vertical run)Metre474
Sl. No. 4.7 E.Deptt Bihar S/R-18, P-44Providing and fixing G.I.tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For horizontal run)Metre71
Sl. No. 4.8 E.Deptt Bihar S/R-18, P-44Providing and fixing G.I.tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For vertical run)Metre99
Sl. No. 4.9 E.Deptt Bihar S/R-18, P-44Fixing of Copper/G.I.tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For horizontal run)Metre33
Sl. No. 4.10 E.Deptt Bihar S/R-18, P-44Fixing of Copper/G.I.tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For vertical run)Metre71
Sl. No. 4.11 E.Deptt Bihar S/R-18, P-45Providing and fixing testing joint, made of 20 mm x 3 mm thick copper strip, 125 mm long, with 4 nos. of tinned brass belts, chuk nuts and spring washers etc.complete as requiredEach247
Sl. No. 4.12 E.Deptt Bihar S/R-18, P-45Providing and fixing testing joint, made of 20 mm x 3 mm thick G.I.bolts, nuts, chuk, nuts and spring washers etc. complete as required.Each80
Sl. No. 4.13 E.Deptt Bihar S/R-18, P-45Providing and laying copper tape 32 mm x 6 mm from earth electrode directly in ground as required.Metre1335
Sl. No. 4.14 E.Deptt Bihar S/R-18, P-45Providing and laying G.I. tape 32 mm x 6 mm from earth electrode directly in ground as required.Metre137
Sl. No. 4.15 E.Deptt Bihar S/R-18, P-45Laying copper/ G.I. tape 32 mm x 6 mm from earth electrode directly in ground as requiredMetre29
Sl. No. 5.1.1 E.Deptt Bihar S/R-18, P-46Supplying and fixing powder coated strip/patty type fluorescent fittings of all type complete with all accessories etc. and lamp directly on wall/ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor single core and earthing the body etc. as required. 4' Long with aluminium/ polyster ballast.Each447
Sl. No. 5.1.2 E.Deptt Bihar S/R-18, P-46Supplying and fixing powder coated strip/patty type fluorescent fittings of all type complete with all accessories etc. and lamp directly on wall/ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor single core and earthing the body etc. as required. 4' Long with copper ballast.Each519
Sl. No. 5.1.3 E.Deptt Bihar S/R-18, P-46Supplying and fixing powder coated strip/patty type fluorescent fittings of all type complete with all accessories etc. and lamp directly on wall/ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor single core and earthing the body etc. as required. 4' Long with Electrical ballast.Each472
Sl. No. 5.2 E.Deptt Bihar S/R-18, P-46Supplying and fixing powder coated strip/patty type fluorescent fittings of all type complete with all accessories etc. and lamp directly on wall/ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor single core and earthing the body etc. as required. 2' Long with copper ballast.Each463
Sl. No. 5.3.1 E.Deptt Bihar S/R-46, P-Supplying and fixing following mounting rail/ box type fluorescent fittings of all type complet with all accessories etc. and lamp directly on wall/ ceiling including connections with1.5 sq. mm. FR PVC insulated copper conducter cable and earthing etc. as required.SingleEach517
Sl. No.5.3.2 E.Deptt Bihar S/R-46Supplying and fixing following mounting rail/ box type fluorescent fittings of all type complet with all accessories etc. and lamp directly on wall/ ceiling including connections with1.5 sq. mm. FR PVC insulated copper conducter cable and earthing etc. as required.DoubleEach926
Sl. No.5.4.1 E.Deptt Bihar S/R-46Supplying and fixing following decorative surface/ recess mounting CFL/fluorescent fittings with aluminium reflector and all accessories, lamp etc. directly on wall/ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing etc. as required. Single DecorativeEach1456
Sl. No.5.4.2 E.Deptt Bihar S/R-46Supplying and fixing following decorative surface/ recess mounting CFL/fluorescent fittings with aluminium reflector and all accessories, lamp etc. directly on wall/ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing etc. as required. Double DecorativeEach1895
Sl. No.5.5 E.Deptt Bihar S/R-46Supplying and fixing FTL (flourescent tube) street light fitting with sheet auminium housing, acrylic cover and copper ballast including 4' x 40 watt FTL etc. on pole/building including connection with FR PVC insulated copper conductor cable and earthing the body etc. as required.Each1940
Sl. No.5.6.1 E.Deptt.Bihar S/R-47
Supplying and fixing following CFL type street light with with sheet aluminium housing, acrylic cover and copper ballast including PL-L lamps etc. on pole/building including connecion and earthing the body etc. as required with18 watt PL-L lamp fittingEach1760
Sl. No.5.6.2 E.Deptt.Bihar S/R-47
Supplying and fixing following CFL type street light with with sheet aluminium housing, acrylic cover and copper ballast including PL-L lamps etc. on pole/building including connecion and earthing the body etc. as required with36 watt PL-L lamp fittingEach1064
Sl. No.5.7 E.Deptt.Bihar S/R-47
Supplying and fixing bulk head fitting die cast aluminium alloy body with prismatic glass cover suitable for the GLS/CFL lamp directly on wall/ Ceilling including connections with 1.5 sq.mm copper conductor cable and earthing the body etc. as required.Each445
Sl. No.5.8.1 E.Deptt.Bihar S/R-47
Supplying and fixing decorative non-integral post top lantern with UV stablized clear/Opal polycarbonate diffuser suitable for Retrofit CFL lamp, complete with all accessories but without lamp including connection earthing the body etc. as required.(Normally used for garden/gate light) Catgory-'A'Each2746
Sl. No.5.8.2 E.Deptt.Bihar S/R-47
Supplying and fixing decorative non-integral post top lantern with UV stablized clear/Opal polycarbonate diffuser suitable for Retrofit CFL lamp, complete with all accessories but without lamp including connection earthing the body etc. as required.(Normally used for garden/gate light) Catgory-'B'Each705
Sl. No.5.9.1 E.Deptt.Bihar S/R-47
Supplying and fixing following powder coated batten for 28 watt 75 flourescent tube complete with electronics ballast and lamp etc. directly on wall/ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor and earthing the body etc. as required.SingleEach565
Sl. No.5.9.2
E.Deptt.Bihar S/R-47
Supplying and fixing following powder coated batten for 28 watt 75 flourescent tube complete with electronics ballast and lamp etc. directly on wall/ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor and earthing the body etc. as requiredDoubleEach926
Sl. No.5.9.3
E.Deptt.Bihar S/R-47
Supplying and fixing single wall mounted 18/22 watt LED type batten fitting complete with electronic driver and LED tube etc directly on wall/ ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor and earthing the body etc. as requiredEach684
Sl. No.5.10.1
E.Deptt.Bihar S/R-47
Supplying and fixing indoor recess mounting decorative mirror optic luminaire with PS parallite louvre and suitable for 2 x 36 Watt FPL/PLL lamp etc. directly on false ceiling, including connection with 1.5 sq,mm FR PVC insulated copper conductor cable and earthing the body etc. as required.Each3342
Sl. No.5.10.2
E.Deptt.Bihar S/R-48
Supplying and fixing indoor recess mounting decorative mirror optic luminaire with PS parallite louvre and suitable for 3 x 36 Watt FPL/PLL lamp etc. directly on false ceiling, including connection with 1.5 sq,mm FR PVC insulated copper conductor cable and earthing the body etc. as required.Each4144
Sl. No.5.10.3
E.Deptt.Bihar S/R-48
Supplying and fixing indoor recess mounting 36 watt LED flat panel luminaire suitble for armstrong / gride ceiling and complete with electric driver etc. directly on false ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required.Each4023
Sl. No.5.11.1
E.Deptt.Bihar S/R-48
Supplying and fixing recess mounted vertical down lighter suitble for single retrofit CFL lamp complete with all accessories and 18 watt CFL lamp directly on false ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required.Each999
Sl. No.5.11.2
E.Deptt.Bihar S/R-48
Supplying and fixing recess mounted vertical down lighter suitble for 2 x 18 Watt PL-C lamp complete with all accessories and 18 watt CFL lamp directly on false ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required.Each1049
Sl. No.5.11.3
E.Deptt.Bihar S/R-48
Supplying and fixing recess mounted 6/7 watt LED vertical down lighter complete with all accessories and replaceable electronic driver directly on false ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required.Each671
Sl. No.5.11.4
E.Deptt.Bihar S/R-48
Supplying and fixing recess mounted 12 watt LED vertical down lighter complete with all accessories and replaceable electronic driver directly on false ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required.Each971
Sl. No.5.11.5
E.Deptt.Bihar S/R-49
Supplying and fixing recess mounted 18/24 watt LED vertical down lighter complete with all accessories and replaceable electronic driver directly on false ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required.Each1066
Sl. No.5.12.1
E.Deptt.Bihar S/R-49
Supplying and fixing following Retrofit CFL type street light fitting with sheet aluminium housing, clear acrylic cover and all accessories including Retrofit CFL lamp etc, on pole/building including connection with FR PVC insulated copper conductor cable and earthing the body etc. as required with 35 watt Retrofit CFL lampEach1547
Sl. No.5.12.2
E.Deptt.Bihar S/R-49
Supplying and fixing following Retrofit CFL type street light fitting with sheet aluminium housing, clear acrylic cover and all accessories including Retrofit CFL lamp etc, on pole/building including connection with FR PVC insulated copper conductor cable and earthing the body etc. as required with 45 watt Retrofit CFL lampEach1681
Sl. No.5.12.3
E.Deptt.Bihar S/R-49
Supplying and fixing following Retrofit CFL type street light fitting with sheet aluminium housing, clear acrylic cover and all accessories including Retrofit CFL lamp etc, on pole/building including connection with FR PVC insulated copper conductor cable and earthing the body etc. as required with 85 watt Retrofit CFL lampEach1902
Sl. No.5.12.4
E.Deptt.Bihar S/R-49
Supplying and fixing 20/24 watt LED type street light with die cast aluminium housing for ingress protection of IP65 and complete with all accessories etc. on pole/building including connection with FR PVC insulated copper conductor cable and earthing the body etc. as required.Each2310
Sl. No.5.12.5
E.Deptt.Bihar S/R-49
Supplying and fixing 40/45 watt LED type street light with die cast aluminium housing for ingress protection of IP65 and complete with all accessories etc. on pole/building including connection with FR PVC insulated copper conductor cable and earthing the body etc. as required.Each4056
Sl. No.5.12.6
E.B.C. Deptt.Bihar S/R-49
Supplying and fixing 90 watt LED type street light with die cast aluminium housing for ingress protection of IP65 and complete with all accessories etc. on pole/building including connection with FR PVC insulated copper conductor cable and earthing the body etc. as required.Each8437
Sl. No.5.13.1
E.Deptt.Bihar S/R-50
Supplying and fixing following HPSV/MH street light luminior with high pressure dia cast aluminium housing, POT optics reflector and toughened flat glass offering (IP65) ingress protection suitable for HPSV/Metal halide lamp and complete with all accessories including lamp, connection etc. as required with 70 watt HPSV lamp.Each2945
Sl. No.5.13.2
E.Deptt.Bihar S/R-50
Supplying and fixing following HPSV/MH street light luminior with high pressure dia cast aluminium housing, POT optics reflector and toughened flat glass offering (IP65) ingress protection suitable for HPSV/Metal halide lamp and complete with all accessories including lamp, connection etc. as required with 150 watt HPSV lamp.Each4420
Sl. No.5.13.3
E.Deptt.Bihar S/R-50
Supplying and fixing following HPSV/MH street light luminior with high pressure dia cast aluminium housing, POT optics reflector and toughened flat glass offering (IP65) ingress protection suitable for HPSV/Metal halide lamp and complete with all accessories including lamp, connection etc. as required with 250 watt HPSV lamp.Each4844
Sl. No.5.13.4
E.Deptt.Bihar S/R-50
Supplying and fixing following HPSV/MH street light luminior with high pressure dia cast aluminium housing, POT optics reflector and toughened flat glass offering (IP65) ingress protection suitable for HPSV/Metal halide lamp and complete with all accessories including lamp, connection etc. as required with 400 watt HPSV lamp.Each5657
Sl. No.5.13.5
E.Deptt.Bihar S/R-50
Supplying and fixing following HPSV/MH street light luminior with high pressure dia cast aluminium housing, POT optics reflector and toughened flat glass offering (IP65) ingress protection suitable for HPSV/Metal halide lamp and complete with all accessories including lamp, connection etc. as required with 150 watt Metal Halide lamp.Each4566
Sl. No.5.13.6
E.Deptt.Bihar S/R-50
Supplying and fixing following HPSV/MH street light luminior with high pressure dia cast aluminium housing, POT optics reflector and toughened flat glass offering (IP65) ingress protection suitable for HPSV/Metal halide lamp and complete with all accessories including lamp, connection etc. as required with 250 watt Metal Halide lamp.Each5192
Sl. No.5.13.7
E.Deptt.Bihar S/R-50
Supplying and fixing following HPSV/MH street light luminior with high pressure dia cast aluminium housing, POT optics reflector and toughened flat glass offering (IP65) ingress protection suitable for HPSV/Metal halide lamp and complete with all accessories including lamp, connection etc. as required with 400 watt Metal Halide lamp.Each5980
Sl. No.5.13.8
E.Deptt.Bihar S/R-50
Supplying and fixing integral FLOOD light luminior with high pressure dia cast aluminium housing, asymmetrical optics glass cover and offering (IP65) ingress protection suitable for 250 watt Metal halide lamp and complete with all accessories including lamp, connection etc. as required with 250 watt Metal Halide lamp.Each5209
Sl. No.5.13.9
E.Deptt.Bihar S/R-50
Supplying and fixing integral FLOOD light luminior with high pressure dia cast aluminium housing, asymmetrical optics glass cover and offering (IP65) ingress protection suitable for 250 watt Metal halide lamp and complete with all accessories including lamp, connection etc. as required with 400 watt Metal Halide lamp.Each5980
Sl. No.5.13.10
E.Deptt.Bihar S/R-50
Supplying and fixing 90 watt LED type FLOOD light with dia cast aluminium housing for ingress protection of IP65 and complete with all accessories etc. and connection with FR PVC insulated copper conductor cable and earthing the body etc. as required.Each8501
Sl. No.5.13.11
E.Deptt.Bihar S/R-50
Supplying and fixing following LED street/ Flood light with die cast aluminium housing for ingress protection of IP65 and complete with all accessories etc on pole/ building including connection and earthing the body etc. as required. 65/70 watt Street lightEach5570
Sl. No. 6.1.1 E.Deptt Bihar S/R-51Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.100 watt GLS clear lamp.Each23
Sl. No. 6.1.2 E.Deptt Bihar S/R-51Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.2'x20 watt tube light.Each49
Sl. No. 6.1.3 E.Deptt Bihar S/R-51Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.4'x40 watt tube light.Each51
Sl. No. 6.1.4 E.Deptt Bihar S/R-51Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.5 watt CFL lamp.Each128
Sl. No. 6.1.5 E.Deptt Bihar S/R-51Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.8/11 watt CFL lamp.Each148
Sl. No. 6.1.6 E.Deptt Bihar S/R-51Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.14/15 watt CFL lamp.Each154
Sl. No. 6.1.7 E.Deptt Bihar S/R-51Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.18 watt CFL lamp.Each221
Sl. No. 6.1.8 E.Deptt Bihar S/R-51Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.20 watt CFL lamp.Each221
Sl. No. 6.1.9 E.Deptt Bihar S/R-51Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.23 watt CFL lamp.Each248
Sl. No. 6.1.10 E.Deptt Bihar S/R-51Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.26 watt CFL lamp.Each248
Sl. No. 6.1.11 E.Deptt Bihar S/R-51Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.45 watt CFL lamp.Each478
Sl. No. 6.1.12 E.Deptt Bihar S/R-51Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.9 watt PL-L lamp.Each75
Sl. No. 6.1.13 E.Deptt Bihar S/R-51Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.11 watt PL-L lamp.Each85
Sl. No. 6.1.14 E.Deptt Bihar S/R-51Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.13 watt PL-L lamp.Each110
Sl. No. 6.1.15 E.Deptt Bihar S/R-51Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.18 watt PL-L lamp.Each118
Sl. No. 6.1.16 E.Deptt Bihar S/R-51Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.36 watt PL-L lamp.Each146
Sl. No. 6.1.17 E.Deptt Bihar S/R-51Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.70 watt sodium lamp.Each278
Sl. No. 6.1.18 E.Deptt Bihar S/R-51Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.150 watt sodium lamp.Each407
Sl. No. 6.1.19 E.Deptt Bihar S/R-51Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 250 watt sodium lampEach419
Sl. No. 6.1.20 E.Deptt Bihar S/R-51Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 400 watt sodium lampEach536
Sl. No. 6.1.21 E.Deptt Bihar S/R-51Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 250 watt Metal Helide lamp (T)Each559
Sl. No. 6.1.22 E.Deptt Bihar S/R-51Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 500 watt Metal HalogenlampEach90
Sl. No. 6.1.23 E.Deptt Bihar S/R-51Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 1000 watt Metal HalogenlampEach116
Sl. No. 6.1.24 E.Deptt Bihar S/R-51Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 28 watt (T5) tube light.Each134
Sl. No. 6.1.25 E.Deptt Bihar S/R-51Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 35/36 watt CFL lampEach369
Sl. No. 6.1.26 E.Deptt Bihar S/R-51Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 85 watt CFL lampEach797
Sl. No. 6.1.27 E.Deptt Bihar S/R-51Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 400 watt Metal Halide lamp (T)Each894
Sl. No. 6.1.28 E.Deptt Bihar S/R-51Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 70 watt Metal Halide lamp (T)Each671
Sl. No. 6.1.29 E.Deptt Bihar S/R-51Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 150 watt Metal Halide lamp (T)Each671
Sl. No. 6.2.1 E.Deptt Bihar S/R-52Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required.
20/40 watt aluminium/polyster ballast.
Each185
Sl. No. 6.2.2 E.Deptt Bihar S/R-52Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required.
20/40 watt copper ballast.
Each231
Sl. No. 6.2.3 E.Deptt Bihar S/R-52Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required.
20/40 watt electronic ballast.
Each237
Sl. No. 6.2.4 E.Deptt Bihar S/R-52Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required.
70 watt HPSV/MH ballast.
Each1191
Sl. No. 6.2.5 E.Deptt Bihar S/R-52Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required.
150 watt HPSV/MH ballast.
Each1743
Sl. No. 6.2.6 E.Deptt Bihar S/R-52Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required.
250 watt HPSV/MH ballast.
Each2045
Sl. No. 6.2.7 E.Deptt Bihar S/R-52Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required.
400 watt HPSV/MH ballast.
Each2397
Sl. No. 6.2.8 E.Deptt Bihar S/R-52Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required.
70 watt 5V/MH control gear box
Each1640
Sl. No. 6.2.9 E.Deptt Bihar S/R-52Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required.
150 watt 5V/MH control gear box
Each2204
Sl. No. 6.2.10 E.Deptt Bihar S/R-52Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required.
250 watt 5V/MH control gear box
Each3229
Sl. No. 6.2.11 E.Deptt Bihar S/R-52Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required.
400 watt 5V/MH control gear box
Each4050
Sl. No. 6.2.12 E.Deptt Bihar S/R-52Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required.
70 to 400 watt /gnitors
Each192
Sl. No. 6.2.13 E.Deptt Bihar S/R-52Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required.
20/40 watt starters
Each14
Sl. No. 6.2.14 E.Deptt Bihar S/R-52Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required.
Tube Fitting holder
Each62
Sl. No. 6.2.15 E.Deptt Bihar S/R-52Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required.
1 x 9/11/13 watt electronic ballast for PL (CFL)
Each202
Sl. No. 6.2.16 E.Deptt Bihar S/R-52Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required.
1 x 18 watt electronic ballast for PL (CFL)
Each202
Sl. No. 6.2.17 E.Deptt Bihar S/R-52Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required.
1 x 36 watt electronic ballast for PL (CFL)
Each319
Sl. No. 6.2.18 E.Deptt Bihar S/R-52Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required.
Electronic ballast for 28 watt (T5)
Each443
Sl. No. 6.3.1 E.Deptt Bihar S/R-52Supplying and fixing of following capacity procelain fuse Link, rewireable type, 240/415 volts, ISI marked, including drilling holes in board, making connections etc. as required 16 amps.Each152
Sl. No. 6.3.2 E.Deptt Bihar S/R-52Supplying and fixing of following capacity procelain fuse Link, rewireable type, 240/415 volts, ISI marked, including drilling holes in board, making connections etc. as required 32 amps.Each213
Sl. No. 6.3.3 E.Deptt Bihar S/R-52Supplying and fixing of following capacity procelain fuse Link, rewireable type, 240/415 volts, ISI marked, including drilling holes in board, making connections etc. as required 63 amps.Each374
Sl. No. 6.3.4 E.Deptt Bihar S/R-52Supplying and fixing of following capacity procelain fuse Link, rewireable type, 240/415 volts, ISI marked, including drilling holes in board, making connections etc. as required 100 amps.Each659
Sl. No. 6.3.5 E.Deptt Bihar S/R-52Supplying and fixing of following capacity procelain fuse Link, rewireable type, 240/415 volts, ISI marked, including drilling holes in board, making connections etc. as required 200 amps.Each1197
Sl. No. 6.3.6 E.Deptt Bihar S/R-52Supplying and fixing of following capacity procelain fuse Link, rewireable type, 240/415 volts, ISI marked, including drilling holes in board, making connections etc. as required 300 amps.Each1698
Sl. No. 6.4.1 E.Deptt Bihar S/R-53Providing and fixing following way singe pole, porcelain rewireable type, 16 amps per way distribution board on surface/recess in suitable size PVC/ G.I.box with phenolic laminated sheet complete with porcelain fuse link, interconnections and earthing the body etc.as required. 2 way, DBEach344
Sl. No. 6.4.2 E.Deptt Bihar S/R-53Providing and fixing following way singe pole, porcelain rewireable type, 16 amps per way distribution board on surface/recess in suitable size PVC/ G.I.box with phenolic laminated sheet complete with porcelain fuse link, interconnections and earthing the body etc.as required. 4 way, DBEach580
Sl. No. 6.4.3 E.Deptt Bihar S/R-53Providing and fixing following way singe pole, porcelain rewireable type, 16 amps per way distribution board on surface/recess in suitable size PVC/ G.I.box with phenolic laminated sheet complete with porcelain fuse link, interconnections and earthing the body etc.as required. 6 way, DBEach837
Sl. No. 6.4.4 E.Deptt Bihar S/R-53Providing and fixing following way singe pole, porcelain rewireable type, 16 amps per way distribution board on surface/recess in suitable size PVC/ G.I.box with phenolic laminated sheet complete with porcelain fuse link, interconnections and earthing the body etc.as required. 8 way, DBEach1015
Sl. No. 6.4.5 E.Deptt Bihar S/R-53Providing and fixing following way singe pole, porcelain rewireable type, 16 amps per way distribution board on surface/recess in suitable size PVC/ G.I.box with phenolic laminated sheet complete with porcelain fuse link, interconnections and earthing the body etc.as required. 10 way, DBEach1248
Sl. No. 6.4.6 E.Deptt Bihar S/R-53Providing and fixing following way singe pole, porcelain rewireable type, 16 amps per way distribution board on surface/recess in suitable size PVC/ G.I.box with phenolic laminated sheet complete with porcelain fuse link, interconnections and earthing the body etc.as required. 12 way, DBEach1426
Sl. No. 6.14.3 E.Deptt Bihar S/R-09, P-6
Old SR
Supplying and laying following sizes and core PVC/XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts (Conforms to IS:1554, part-1)
16 sq.mm, 2 core
Metre173
Sl. No. 6.14.6 E.Deptt Bihar S/R-09, P-6
Old SR
Supplying and laying following sizes and core PVC/XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts (Conforms to IS:1554, part-1)
35 sq.mm, 3.5 core
Metre350
Sl. No. 6.15 E.Deptt Bihar S/R-09, P-7
Old SR
Providing and fixing PVC/G.I. box on surface or in recess with suitable size of phenolic laminated sheet cover in front including 3 nos. 6 amp 3/5 pin socket outlet, 3 nos. 6 amp piano type switch, 1 no. 15/16 amp S.S. combined, 1 no. 6/32 amp S.P. 'C' series MCB and interconnection with 2.5 sq.mm PVC insulated copper conductor, cable, earthing, painting etc. as required. (For used as computer terminal.Each618
Sl. No. 6.17.4 E.Deptt Bihar S/R-09, P-7
Part II
Old SR
Supplying, fitting and fixing following sizes G.I. pipes with making holes in ground and grouting the pole with cement, sand and stone chips in ratio 1:2:4 including painting the pole etc as required
5.49 mtr (18 ft) 50 mm dia.
Each2041
Sl. No. 6.18 E.Deptt Bihar S/R-09, P-7
Part II
Old SR
Trench cutting in soil of suitable size 0.457 mtr (1.5 feet) wide and 0.609 mtr (2 feet) depth including refilling the trench with same etc as required. (For laying the cable)Metre22
Sl. No. 7.1.1 E..B.C Deptt Bihar S/R-53Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq.mm.Metre144
Sl. No. 7.1.2 E.Deptt Bihar S/R-53Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 35 sq.mm and upto 95 sq.mm.Metre151
Sl. No. 7.1.3 E.Deptt Bihar S/R-53Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 95 sq.mm and upto 185 sq.mm.Metre157
Sl. No. 7.1.3 E.Deptt Bihar S/R-09, P-10
Old SR
Supplying and fixing PVC insulated single core aluminium conductor cable alongwith 12 SWG.GI bearer wire including connection etc. as required
2 x 10sq.mm
Metre32
Sl. No. 7.1.4 E.Deptt Bihar S/R-53Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 185 sq.mm and upto 400 sq.mm.Metre178
Sl. No. 7.1.4 E.Deptt Bihar S/R-09, P-10
Old SR
Supplying and fixing PVC insulated single core aluminium conductor cable alongwith 12 SWG.GI bearer wire including connection etc. as required (Note:-Normally used for service connection.)
4 x 16sq.mm
Metre37
Sl. No. 7.1.5 E.Deptt Bihar S/R-09, P-10
Old SR
Supplying and fixing PVC insulated single core aluminium conductor cable alongwith 12 SWG.GI bearer wire including connection etc. as required (Note:-Normally used for service connection.)
4 x 10sq.mm
Metre59
Sl. No. 7.2.1 E.Deptt Bihar S/R-53Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq.mm.Metre108
Sl. No. 7.2.2 E.Deptt Bihar S/R-53Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 35 sq.mm and upto 95 sq.mm.Metre121
Sl. No. 7.2.3 E.Deptt Bihar S/R-53Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 95 sq.mm and upto 185 sq.mm.Metre126
Sl. No. 7.2.4 E.Deptt Bihar S/R-53Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 185 sq.mm and upto 400 sq.mm.Metre141
Sl. No. 7.3.1 E.Deptt Bihar S/R-53Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, and refilling the trench etc. as required but excluding sand cushioning and protective covering. Upto 35 sq.mm.Metre51
Sl. No. 7.3.2 E.Deptt Bihar S/R-53Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, and refilling the trench etc. as required but excluding sand cushioning and protective covering. Above 35 sq.mm and upto 95 sq.mm.Metre56
Sl. No. 7.3.3 E.Deptt Bihar S/R-54Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, and refilling the trench etc. as required but excluding sand cushioning and protective covering. Above 95 sq.mm and upto 185 sq.mm.Metre61
Sl. No. 7.3.4 E.Deptt Bihar S/R-54Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, and refilling the trench etc. as required but excluding sand cushioning and protective covering. Above 185 sq.mm and upto 400 sq.mm.Metre75
Sl. No. 7.4.1 E.Deptt Bihar S/R-54Fixing for laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq.mm. (Clamped with 1 mm thick saddle).Metre21
Sl. No. 7.4.2 E.Deptt Bihar S/R-54Fixing for laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Abode 35 sq.mm. amd upto 95 sq.mm.(Clamped with 25 x 3 mm MS flat clamp).Metre55
Sl. No. 7.4.3 E.Deptt Bihar S/R-54Fixing for laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Abode 95 sq.mm. and upto 185 sq.mm.(Clamped with 25 x 40 x 3 mm MS flat clamp).Metre64
Sl. No. 7.4.4 E.Deptt Bihar S/R-54Fixing for laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Abode 185 sq.mm. and upto 400 sq.mm.(Clamped with 40 x 3 mm MS flat clamp).Metre88
Sl. No. 7.5.1 E.Deptt Bihar S/R-54Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 120 sq.mm.Metre191
Sl. No. 7.5.2 E.Deptt Bihar S/R-54Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 120 sq.mm and upto 400 sq.mm.Metre206
Sl. No. 8.1.1 E.Deptt Bihar S/R-54Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 4.5 metre and upto 6.5 metreEach2168
Sl. No. 8.1.2 E.Deptt Bihar S/R-54Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 6.5 metre and upto 8 metreEach2581
Sl. No. 8.1.3 E.Deptt Bihar S/R-54Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 8 metre and upto 10.0 metreEach3072
Sl. No. 8.1.4 E.Deptt Bihar S/R-54Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 10 metre and upto 12 metreEach3585
Sl. No. 8.2 E.Deptt Bihar S/R-54Erection of steel tubular or rail pole strut in cement concrete 1:3:6(1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size) and refilling and secured with holding clamps, bolts, nuts etc. as required.Each3877
Sl. No. 8.3 E.Deptt Bihar S/R-55Providing and making steel collar with cement concrete 1:3:6 (1 cement :3 coasrse sand : 6 stone aggregate 20 mm) of specified size and shape including form work, plastering if required, curing etc. as required (volume of pole/pipe not to be dedected)Each6132
Sl. No. 8.4.1 E.Deptt Bihar S/R-55Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 32 mm diaMetre253
Sl. No. 8.4.2 E.Deptt Bihar S/R-55Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 40 mm diaMetre270
Sl. No. 8.5 E.Deptt Bihar S/R-55Supplying and fixing of 32 mm dia x 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV/ HPSV/ CFL street light fitting on pole including bending the pipe to the required shape, 2 nos. 40 mm x 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.Each809
Sl. No. 8.6 E.Deptt Bihar S/R-55Supplying and fixing of light class G.I. pipe of 50 mm dia (nominal) 3 metres length along the pole for protection of under ground cable as required.Each982
Sl. No. 8.7 E.Deptt Bihar S/R-55Supplying and fixing of light class G.I. pipe of 80 mm dia (nominal) 3 metres length along the pole for protection of under ground cable as required.Each1334
Sl. No. 8.8 E.Deptt Bihar S/R-55Supplying and fixing of light class G.I. pipe of 100 mm dia (nominal) 3 metres length along the pole for protection of under ground cable as required.Each2802
Sl. No. 8.9.1 E.Deptt Bihar S/R-55Supplying and fixing pole mounted junction box/fuse box for single phase/ 2 core low wattage street light pole with all accessories and connection etc. as required.Each638
Sl. No. 8.9.2 E.Deptt Bihar S/R-55Supplying and fixing pole mounted junction box/fuse box for three phase/ 4 core high wattage HPSV/ HPMV/ MH street light pole with all accessories and connection etc. as required.Each755
Sl. No. 8.10.1 E.Deptt Bihar S/R-55Supplying and fixing wall/floor mounted cubical panel board, fabricated with 18 gauge iron sheet, suitable for panel mounted switch disconnector, including bus-bar chamber, insulator and painting etc. as required.(but without busbar copper strip)Sft1314
Sl. No. 8.10.2 E.Deptt Bihar S/R-55Supplying and fixing wall/floor mounted cubical panel board, fabricated with 16 gauge iron sheet, suitable for panel mounted switch disconnector, including bus-bar chamber, insulator and painting etc. as required.(but without busbar copper strip)Sft1382
Sl. No. 8.10.3 E.Deptt Bihar S/R-56Supply and fixing digital voltmeter, single phase in the existing cubical panel board including drilling holes in the pannel board, making connection etc. as required.Each1202
Sl. No. 8.10.4 E.Deptt Bihar S/R-56Supply and fixing digital voltmeter, three phase in the existing cubical panel board including drilling holes in the pannel board, making connection etc. as required.Each1337
Sl. No. 8.10.5 E.Deptt Bihar S/R-56Supply and fixing digital Ammeter, single phase with
C.T. coil in the existing cubical panel board including
drilling holes in the panel board, making connection etcas required.
Each1154
Sl. No. 8.10.6 E.Deptt Bihar S/R-56Supply and fixing digital Ammeter, three phase with C.T. coil in the existing cubical panel board including drilling holes in the panel board, making connection etc as required.Each1643
Sl. No. 8.11.1 E.Deptt Bihar S/R-56Supplying and fixing extra down rod for ceiling fan of 1 metre length G.I. pipe, 15 mm dia, heavy guage including painting etc. as required.Each305
Sl. No. 8.11.2 E.Deptt Bihar S/R-56Supplying and installation of regulator/ standard model A.C. ceiling fan of 1200 mm sweep including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm. FR PVC insulated copper conductor etc. as required.Each1618
Sl. No. 8.11.3 E.Deptt Bihar S/R-56Supplying and installation of regulator/ standard model A.C. ceiling fan of 1400 mm sweep including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm. FR PVC insulated copper conductor etc. as required.Each1758
Sl. No. 8.11.4 E.Deptt Bihar S/R-56Supplying and installation of 300 mm, 230 V A.C.exhaust fan in the existing opening including making good the damage, connection testing, commissioning etc. as required.Each1483
Sl. No. 8.11.5 E.Deptt Bihar S/R-56Supplying and installation of 375 mm, 230 V A.C. fan in the existing opening including making good the damage, connection testing, commissioning etc. as required.Each3543
Sl. No. 8.11.6 E.Deptt Bihar S/R-57Supplying and installation of 450 mm, 230 V A.C. exhaust fan in the existing opening including making good the damage, connection testing, commissioning etc. as required.Each4413
Sl. No. 8.11.7 E.Deptt Bihar S/R-57Supplying and installation of 400 mm, 230 V A.C. wall/cabin fan including fixing the bracket, making, connection, testing, commissioning etc. as required.Each2427
Sl. No. 8.12.1 E.Deptt Bihar S/R-18 57Supply and erection of 4 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, make of 3 mm thick sheet alongwith base plate of size 220 x 220 x 12 mm, small door opening for junction box mounting and suitable size foundation bolts with template and all complete as required (but without pole collar) Single arm, 1500 mm.Each15420
Sl. No. 8.12.2 E.Deptt Bihar S/R-57Supply and erection of 4 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, make of 3 mm thick sheet alongwith base plate of size 220 x 220 x 12 mm, small door opening for junction box mounting and suitable size foundation bolts with template and all complete as required (but without pole collar) Double arm, 1500 mm.Each16895
Sl. No. 8.13.1 E.Deptt Bihar S/R-57Supply and erection of 6 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, make of 3 mm thick sheet alongwith base plate of size 220 x 220 x 12 mm, small door opening for junction box mounting and suitable size foundation bolts with template and all complete as required (but without pole collar) Single arm, 1500 mmEach20535
Sl. No. 8.13.2 E.Deptt Bihar S/R-57Supply and erection of 6 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, make of 3 mm thick sheet alongwith base plate of size 220 x 220 x 12 mm, small door opening for junction box mounting and suitable size foundation bolts with template and all complete as required (but without pole collar) Double arm, 1500 mmEach22009
Sl. No. 8.14.1 E.B.C. Deptt Bihar S/R-57Supply and erection of 7 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 155 mm, make of 3 mm thick sheet alongwith base plate of size 260 x 260 x 16 mm, small door opening for junction box mounting and suitable size foundation bolts with template and all complete as required (but without pole collar) Single arm, 1500 mmEach21505
Sl. No. 8.14.2 E.B.C. Deptt Bihar S/R-57Supply and erection of 7 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 155 mm, make of 3 mm thick sheet alongwith base plate of size 260 x 260 x 16 mm, small door opening for junction box mounting and suitable size foundation bolts with template and all complete as required (but without pole collar) Double arm, 1500 mmEach26231
Sl. No. 8.15.1 E.Deptt Bihar S/R-58Supply and erection of 8 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 155 mm, make of 3 mm thick sheet alongwith base plate of size 260 x 260 x 16 mm, small door opening for junction box mounting and suitable size foundation bolts with template and all complete as required (but without pole collar) Single arm, 1500 mmEach27912
Sl. No. 8.15.2 E.Deptt Bihar S/R-58Supply and erection of 8 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 155 mm, make of 3 mm thick sheet alongwith base plate of size 260 x 260 x 16 mm, small door opening for junction box mounting and suitable size foundation bolts with template and all complete as required (but without pole collar) Double arm, 1500 mmEach29448
Sl. No. 9.1 E.Deptt Bihar S/R-58Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within alead of 50 metres.Cum153
Sl. No. 9.2 E.Deptt Bihar S/R-18, 58Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within alead of 50 metres.Cum155
Sl. No. 9.3 E.Deptt Bihar S/R-58Filling available excavated earth (excluding rock) in trenches, sides of foundations etc. in layers not exceeding 20 cm in depth, condolidating eachCum69
Sl. No. 9.4 E.Deptt Bihar S/R-58Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing the sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc. in layers of 20 cm, ramming, watering and disposal of excavated soil as directed, with a lead of 50 metres.Cum178
Sl. No. 9.5 E.Deptt Bihar S/R-58Duduct for not consolidation by ramming and watering while refilling with sand and or good soil in cable/ pipe laying.Cum40
Sl. No. 9.6 E.Deptt Bihar S/R-58Excavation for cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres.Cum46
Sl. No. 9.7 E.Deptt Bihar S/R-58Providing and laying in position cement concrete 1:2:4 (1 cement :2 coasrse sand : 4 stone aggregate 20 mm) in foundation of pump, DG set etc. including form work etc. as required.Cum6678
Sl. No. 9.8 E.Deptt Bihar S/R-59Providing and laying in position cement concrete 1:3:6 (1 cement :3 coasrse sand : 6 stone aggregate 20 mm) in foundation of pump, DG set etc. including form work etc. as required.Cum6132
Sl. No. 9.9 E.Deptt Bihar S/R-59Providing and laying in position cement concrete 1:3:6 (1 cement :3 coasrse sand : 6 stone aggregate 40 mm) in foundation of pump, DG set etc. including form work etc. as required.Cum5864
Sl. No. 9.10 E.Deptt Bihar S/R-59Providing and laying in position reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graged stone aggregate 20 mm nominal size) in foundation of pump, DG et etc including form work etc. as required.(excluding reinforcement)Cum6835
Sl. No. 9.11 E.Deptt Bihar S/R-59Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels.Cum5106
Sl. No. 9.12 E.Deptt Bihar S/R-59Providing cement plaster of mix 1:4 (1 cement :4 fine sand) at all levels.Sq.
mtr
134
Sl. No. 9.13.1 E.B.C. Deptt Bihar S/R-59Providing, laying and fixing of following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required 50 mm diaMetre509
Sl. No. 9.13.2 E.Deptt Bihar S/R-59Providing, laying and fixing of following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required 80 mm diaMetre439
Sl. No. 9.13.3 E.Deptt Bihar S/R-59Providing, laying and fixing of following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required 100 mm diaMetre948
Sl. No. 9.13.4 E.Deptt Bihar S/R-18- 59Providing, laying and fixing of following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required 150 mm diaMetre1416
Sl. No. 9.14.1 E.Deptt Bihar S/R-59Providing, laying and fixing following dia R.C.C. pipe NP2 class (light duty) in grond complete with RCC collars, jointing with cement mortar 1:2 (1 cement :2 fine sand) including trenching (75 cm deep) and refilling etc. as required 100 mm duaEach308
Sl. No. 9.14.2 E.Deptt Bihar S/R-59Providing, laying and fixing following dia R.C.C. pipe NP2 class (light duty) in grond complete with RCC collars, jointing with cement mortar 1:2 (1 cement :2 fine sand) including trenching (75 cm deep) and refilling etc. as required 150 mm duaEach348
Sl. No. 9.14.3 E.Deptt Bihar S/R-59Providing, laying and fixing following dia R.C.C. pipe NP2 class (light duty) in grond complete with RCC collars, jointing with cement mortar 1:2 (1 cement :2 fine sand) including trenching (75 cm deep) and refilling etc. as required 250 mm duaEach423
Sl. No. 9.14.4 E.Deptt Bihar S/R-59Providing, laying and fixing following dia R.C.C. pipe NP2 class (light duty) in grond complete with RCC collars, jointing with cement mortar 1:2 (1 cement :2 fine sand) including trenching (75 cm deep) and refilling etc. as required 300 mm duaEach518