| CODENO | DESCRIPTION | UNIT | RATE IN FIG. |
|---|---|---|---|
| Code No. 1.1.1 E. Deptt. Bihar S/R-18, P-21 | Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm FR PVC insulated Copper conductor single core cable in surface/ recessed PVC conduit, with piano type switch Phenolic laminated sheet suitable size PVC/G.I. Box etc. as required. (a) Group A | Per Point | 465 |
| Code No. 1.1.2 E. Deptt. Bihar S/R-18, P-21 | Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm FR PVC insulated Copper conductor single core cable in surface/ recessed PVC conduit, with piano type switch Phenolic laminated sheet suitable size PVC/G.I. Box etc. as required. (a) Group B | Per Point | 559 |
| Code No. 1.1.3 E. Deptt. Bihar S/R-18, P-21 | Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm FR PVC insulated Copper conductor single core cable in surface/ recessed PVC conduit, with piano type switch Phenolic laminated sheet suitable size PVC/G.I. Box etc. as required. (a) Group C | Per Point | 681 |
| Code No. 1.2 E. Deptt. Bihar S/R-18, P-21 | Wiring for twin Control light point with 1.5 Sq.mm PVC insulated copper conductor single core cable in surface/recessed PVC conduit 2 way piano type switch, phenolic leminated sheet, suitable size PVC/G.I. box and etc. as required | Per Point | 685 |
| Sl.No.1.3.1 E.Deptt. Bihar S/R-18, P-21 | Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm FR PVC insulated Copper conductor single core cable in surface/ recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. Box etc. as required. (a) Group A | Per Point | 513 |
| Sl.No.1.3.2 E.Deptt. Bihar S/R-18, P-21 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch, modular plate, suitable size G.I. box etc as required. (a) Group B | Per Point | 602 |
| Sl.No.1.3.3 E.Deptt. Bihar S/R-18, P-21 | Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm FR PVC insulated Copper conductor single core cable in surface/ recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. Box etc. as required. (a) Group C | Per Point | 724 |
| Code No. 1.4 E. Deptt. Bihar S/R-18, P-22 | Wiring for twin control light point with 1.5 Sq.mm FR PVC insulated Copper conductor single core cable in surface/ recessed medium class PVC conduit, 2 way modular switch,modular plate, suitable size G.I. Box etc. as required. | Per Point | 755 |
| Code No. 1.5 E. Deptt. Bihar S/R-18, P-22 | Wiring for light/Power plug with 2x4 Sq.mm FR PVC insulated Copper conductor single core cable in surface recessed PVC conduit along with 1 No. 4 sq.mm. FR PVC insulated copper conductor single core cable for loop earthing as required. | Per Mtr. | 200 |
| Code No. 1.6 E. Deptt. Bihar S/R-18, P-22 | Wiring for light/power plug with 2 x 4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 2 nos. 4 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required. | Per Mtr. | 335 |
| Code No. 1.7.1 E. Deptt. Bihar S/R-18, P-22 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. CKT- (2 x1.5mm2 + 1x1.5 mm2 earth wire) | Per Mtr. | 130 |
| Code No. 1.7.2 E. Deptt. Bihar S/R-18, P-22 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. CKT- (2 x2.5mm2 + 1x2.5 mm2 earth wire) | Per Mtr. | 161 |
| Code No. 1.7.3 E. Deptt. Bihar S/R-18, P-22 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. CKT- (2 x4.0mm2 + 1x4.0 mm2) | Per Mtr. | 200 |
| Code No. 1.7.4 E. Deptt. Bihar S/R-18, P-22 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain- (2 x6.0 mm2 + 1x6.0 mm2 earth wire) | Per Mtr. | 271 |
| Code No. 1.7.5 E. Deptt. Bihar S/R-18, P-22 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (2 x10.5 mm2 + 1x10 mm2) | Per Mtr. | 382 |
| Code No. 1.7.6 E. Deptt. Bihar S/R-18, P-22 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (2 x16.00 mm2 + 1x16 mm2) | Per Mtr. | 559 |
| Code No. 1.7.7 E. Deptt. Bihar S/R-18, P-23 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (2 x25.00 mm2 + 1x16 mm2) | Per Mtr. | 727 |
| Code No. 1.7.8 E. Deptt. Bihar S/R-18, P-24 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (2 x35.00 mm2 + 1x16 mm2) | Per Mtr. | 919 |
| Code No. 1.7.9 E. Deptt. Bihar S/R-18, P-22 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (4 x2.50 mm2 + 1x2.5 mm2) | Per Mtr. | 226 |
| Code No. 1.7.10 E. Deptt. Bihar S/R-18, P-23 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (4x4.0 mm2 + 1x4.0mm2) | Per Mtr. | 294 |
| Code No. 1.7.11 E. Deptt. Bihar S/R-18, P-23 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (4x6.0 mm2 + 1x6.0mm2) | Per Mtr. | 410 |
| Code No. 1.7.12 E. Deptt. Bihar S/R-18, P-23 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (4x10 mm2 + 1x10 mm2) | Per Mtr. | 593 |
| Code No. 1.7.13 E. Deptt. Bihar S/R-18, P-23 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (4x16 mm2 + 1x16 mm2) | Per Mtr. | 879 |
| Code No. 1.7.14 E. Deptt. Bihar S/R-18, P-24 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (4x25 mm2 + 1x16 mm2) | Per Mtr. | 1232 |
| Code No. 1.7.15 E. Deptt. Bihar S/R-18, P-25 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of PVC insulated Copper conductor single core cable in surface recessed PVC conduit as required. Submain (4x35 mm2 + 1x16 mm2) | Per Mtr. | 1587 |
| Sl.No.1.8.1 E.Deptt. Bihar S/R-18, P-23 | Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm PVC insulated Aluminium conductor single core cable in surface/ recessed PVC conduit, with piano type switch Phenolic laminated sheet suitable size PVC/G.I. Box single core cable etc. as required. (a) Group A | Per Point | 387 |
| Sl.No.1.8.2 E.Deptt. Bihar S/R-18, P-23 | Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm PVC insulated Aluminium conductor single core cable in surface/ recessed PVC conduit, with piano type switch Phenolic laminated sheet suitable size PVC/G.I. Box single core cable etc. as required. (b) Group B | Per Point | 448 |
| Sl.No.1.8.3 E.Deptt. Bihar S/R-18, P-23 | Wiring for light point /Fan Point/ exhaust fan point/ call bell point with 1.5 Sq.mm PVC insulated Aluminium conductor single core cable in surface/ recessed PVC conduit, with piano type switch Phenolic laminated sheet suitable size PVC/G.I. Box single core cable etc. as required. (a) Group C | Per Point | 542 |
| Sl.No.1.9 E.Deptt.Bihar S/R-18 P-23 | Wiring for twin Control light point with 1.5 Sq.mm PVC insulated aluminium conductor single core cable in surface/recessed PVC conduit 2 way piano type switch, phenolic leminated sheet, suitable size PVC/G.I. box and etc. as required | Per Point | 546 |
| Sl.No. 1.10 E.Deptt. Bihar S/R-18,P-24 | Wiring for light/power plug with 2x4 mm2 FR PVC insulated copper concudtor single core cable in surface/recessed PVC conduit along with one no. 4 mm2 FR PVC insulated copper conductor single core cable for loop earthing etc as required. | Per Mtr. | 88 |
| Sl.No. 1.11 E.Deptt. Bihar S/R-18,P-25 | Wiring for light/power plug with 4x4 mm2 FR PVC insulated copper concudtor single core cable in surface/recessed PVC conduit along with 2 noS. 4 mm2 PVC insulated aluminium conductor single core cable for loop earthing etc as required. | Per Mtr. | 134 |
| Sl.No. 1.12.1 E.Deptt. Bihar S/R-18,P-24 | Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 1.5 Sq.mm + 1x 1.5 Sq.mm earth wire | Metre | 88 |
| Sl.No. 1.12.2 E.Deptt. Bihar S/R-18,P-24 | Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 2.5 Sq.mm + 1x 2.5 Sq.mm earth wire | Metre | 93 |
| Sl.No. 1.12.3 E.Deptt. Bihar S/R-18,P-25 | Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 4 Sq.mm + 1x 4 Sq.mm earth wire | Metre | 100 |
| Sl.No. 1.12.4 E.Deptt. Bihar S/R-18,P-24 | Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 6 Sq.mm + 1x 6 Sq.mm earth wire | Metre | 119 |
| Sl.No. 1.12.5 E.Deptt. Bihar S/R-18,P-24 | Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 10 Sq.mm + 1x 10 Sq.mm earth wire | Metre | 139 |
| Sl.No. 1.12.6 E.Deptt. Bihar S/R-18,P-25 | Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 16 Sq.mm + 1x 16 Sq.mm earth wire | Metre | 180 |
| Sl.No. 1.12.7 E.Deptt. Bihar S/R-18,P-26 | Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 25 Sq.mm + 1x 16 Sq.mm earth wire | Metre | 186 |
| Sl.No. 1.12.8 E.Deptt. Bihar S/R-18,P-27 | Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 2.5 Sq.mm + 1x 2.5 Sq.mm earth wire | Metre | 112 |
| Sl.No. 1.12.9 E.Deptt. Bihar S/R-18,P-28 | Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required. 4 x 4 Sq.mm + 1x 4 Sq.mm earth wire | Metre | 127 |
| Sl.No. 1.12.10 E.Deptt. Bihar S/R-18,P-29 | Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required. 4 x 6 Sq.mm + 1x 6 Sq.mm earth wire | Metre | 155 |
| Sl.No. 1.12.11 E.Deptt. Bihar S/R-18,P-24 | Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required. 4 x 10 Sq.mm + 1x 10 Sq.mm earth wire | Metre | 187 |
| Sl.No. 1.12.12 E.Deptt. Bihar S/R-18,P-24 | Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required. 4 x 16 Sq.mm + 1 x 16 Sq.mm earth wire | Metre | 247 |
| Sl.No. 1.12.13 E.Deptt. Bihar S/R-18,P-25 | Wiring for circuit/ Submain wiring along with earth wire with following sizes PVC insulated aluminium conductor, single core cable in surface/ recessed PVC conduit as required. 4 x 25 Sq.mm + 1 x 25 Sq.mm earth wire | Metre | 326 |
| Sl.No.1.13.1 E.Deptt. Bihar S/R-18, P-25 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm. FR PVC insulated copper donductor single core cable in existing surface/ recessed PVC conduit including dismantling as required. Group A | Per Point | 298 |
| Sl.No.1.13.2 E.Deptt. Bihar S/R-18, P-25 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm. FR PVC insulated copper donductor single core cable in existing surface/ recessed PVC conduit including dismantling as required. Group B | Per Point | 348 |
| Sl.No.1.13.3 E.Deptt. Bihar S/R-18, P-25 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm. FR PVC insulated copper donductor single core cable in existing surface/ recessed PVC conduit including dismantling as required. Group C | Per Point | 468 |
| Sl.No.1.14 E.Deptt. Bihar S/R-18, P-24 | Rewiring for twin control light point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable and 1.5 sq.mm FR PVC insulated copper conductor single core as earth wire in existing surface/ recessed medium class PVC conduit including dismentaling as required. | Per Point | 473 |
| Sl.No.1.15.1 E.Deptt. Bihar S/R-18, P-25 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 1 x 1.5 sq.mm | Metre | 24 |
| Sl.No.1.15.2 E.Deptt. Bihar S/R-18, P-25 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 2 x 1.5 sq.mm | Metre | 41 |
| Sl.No.1.15.3 E.Deptt. Bihar S/R-18, P-25 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 3 x 1.5 sq.mm | Metre | 62 |
| Sl.No.1.15.4 E.Deptt. Bihar S/R-18, P-25-26 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 4 x 1.5 sq.mm | Metre | 79 |
| Sl.No.1.15.5 E.Deptt. Bihar S/R-18, P-25-27 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 5 x 1.5 sq.mm | Metre | 100 |
| Sl.No.1.15.6 E.Deptt. Bihar S/R-18, P-25-28 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 6 x 1.5 sq.mm | Metre | 117 |
| Sl.No.1.15.7 E.Deptt. Bihar S/R-18, P-25-29 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 7 x 1.5 sq.mm | Metre | 141 |
| Sl.No.1.15.8 E.Deptt. Bihar S/R-18, P-25-30 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 8 x 1.5 sq.mm | Metre | 158 |
| Sl.No.1.15.9 E.Deptt. Bihar S/R-18, P-25-31 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 9 x 1.5 sq.mm | Metre | 182 |
| Sl.No.1.15.10 E.Deptt. Bihar S/R-18, P-25-32 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 10 x 1.5 sq.mm | Metre | 199 |
| Sl.No.1.15.11 E.Deptt. Bihar S/R-18, P-25-26 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 2 x 2.5 sq.mm | Metre | 62 |
| Sl.No.1.15.12 E.Deptt. Bihar S/R-18, P-25-27 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 3 x 2.5 sq.mm | Metre | 93 |
| Sl.No.1.15.13 E.Deptt. Bihar S/R-18, P-25-28 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 4 x 2.5 sq.mm | Metre | 120 |
| Sl.No.1.15.14 E.Deptt. Bihar S/R-18, P-25-29 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 5 x 2.5 sq.mm | Metre | 151 |
| Sl.No.1.15.15 E.Deptt. Bihar S/R-18, P-25-30 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 6 x 2.5 sq.mm | Metre | 178 |
| Sl.No.1.15.16 E.Deptt. Bihar S/R-18, P-25-31 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 7 x 2.5 sq.mm | Metre | 213 |
| Sl.No.1.15.17 E.Deptt. Bihar S/R-18, P-25-32 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 8 x 2.5 sq.mm | Metre | 240 |
| Sl.No.1.15.18 E.Deptt. Bihar S/R-18, P-25-33 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 9 x 2.5 sq.mm | Metre | 275 |
| Sl.No.1.15.19 E.Deptt. Bihar S/R-18, P-25-34 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 10 x 2.5 sq.mm | Metre | 302 |
| Sl.No.1.15.20 E.Deptt. Bihar S/R-18, P-25-26 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 2 x 4 sq.mm | Metre | 95 |
| Sl.No.1.15.21 E.Deptt. Bihar S/R-18, P-25-27 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 3 x 4 sq.mm | Metre | 135 |
| Sl.No.1.15.22 E.Deptt. Bihar S/R-18, P-25-28 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 4 x 4 sq.mm | Metre | 176 |
| Sl.No.1.15.23 E.Deptt. Bihar S/R-18, P-25-29 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 5 x 4 sq.mm | Metre | 217 |
| Sl.No.1.15.24 E.Deptt. Bihar S/R-18, P-25-30 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 6 x 4 sq.mm | Metre | 257 |
| Sl.No.1.15.25 E.Deptt. Bihar S/R-18, P-25-31 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 7 x 4 sq.mm | Metre | 298 |
| Sl.No.1.15.26 E.Deptt. Bihar S/R-18, P-25-32 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 8 x 4 sq.mm | Metre | 339 |
| Sl.No.1.15.27 E.Deptt. Bihar S/R-18, P-25-33 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 9 x 4 sq.mm | Metre | 380 |
| Sl.No.1.15.28 E.Deptt. Bihar S/R-18, P-25-34 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 10 x 4 sq.mm | Metre | 432 |
| Sl.No.1.15.29 E.Deptt. Bihar S/R-18, P-25-26 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 2 x 6 sq.mm | Metre | 136 |
| Sl.No.1.15.30 E.Deptt. Bihar S/R-18, P-25-26 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 3 x 6 sq.mm | Metre | 196 |
| Sl.No.1.15.31 E.Deptt. Bihar S/R-18, P-25-27 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 4 x 6 sq.mm | Metre | 264 |
| Sl.No.1.15.32 E.Deptt. Bihar S/R-18, P-25-28 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 5 x 6 sq.mm | Metre | 325 |
| Sl.No.1.15.33 E.Deptt. Bihar S/R-18, P-25-29 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 6 x 6 sq.mm | Metre | 393 |
| Sl.No.1.15.34 E.Deptt. Bihar S/R-18, P-25-30 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 7 x 6 sq.mm | Metre | 453 |
| Sl.No.1.15.35 E.Deptt. Bihar S/R-18, P-25-31 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 8 x 6 sq.mm | Metre | 516 |
| Sl.No.1.15.36 E.Deptt. Bihar S/R-18, P-25-32 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 9 x 6 sq.mm | Metre | 576 |
| Sl.No.1.15.37 E.Deptt. Bihar S/R-18, P-25-33 | Supplying and drawing following size of FR PVC insulated copper conductor, single core cable in the existing surface/recessed PVC conduit as requirjed: 10 x 6 sq.mm | Metre | 637 |
| Sl.No.1.16.1 E.Deptt. Bihar S/R-18, P-27 | Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as requirjed.1 Pair | Metre | 13 |
| Sl.No.1.16.2 E.Deptt. Bihar S/R-18, P-27 | Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as requirjed.2 Pair | Metre | 18 |
| Sl.No.1.16.3 E.Deptt. Bihar S/R-18, P-27 | Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed PVC conduit as requirjed.4 Pair | Metre | 22 |
| Sl.No.1.17 E.Deptt. Bihar S/R-18, P-27 | Supplying and drawing Construction of co-axial TV cable RG-6 grade copper conductor PE insulated, with PVC sheath in the existing surface/recessed PVC conduit as required. | Metre | 29 |
| Sl.No.1.18.1 E.Deptt. Bihar S/R-18, P-27 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm. PVC insulated aluminium conductor single core cable in existing surface/ recessed PVC conduit including dismantling as required. Group A | Per Point | 173 |
| Sl.No.1.18.2 E.Deptt. Bihar S/R-18, P-27 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm. PVC insulated aluminium conductor single core cable in existing surface/ recessed PVC conduit including dismantling as required. Group B | Per Point | 182 |
| Sl.No.1.18.3 E.Deptt. Bihar S/R-18, P-27 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm. PVC insulated aluminium conductor single core cable in existing surface/ recessed PVC conduit including dismantling as required. Group C | Per Point | 264 |
| Sl.No.1.19 E.Deptt. Bihar S/R-18, P-28 | Rewiring for twin control light point with 1.5 sq.mm. PVC insulated aluminium conductor single core cable in existing surface/ recessed PVC conduit including dismantling as required. | Point | 194 |
| Sl.No.1.20.1 E.Deptt. Bihar S/R-18, P-28 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 1 x 1.5 sq.mm | Metre | 8 |
| Sl.No.1.20.2 E.Deptt. Bihar S/R-18, P-28 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 2 x 1.5 sq.mm | Metre | 10 |
| Sl.No.1.20.3 E.Deptt. Bihar S/R-18, P-28 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 3 x 1.5 sq.mm | Metre | 16 |
| Sl.No.1.20.4 E.Deptt. Bihar S/R-18, P-28 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 4 x 1.5 sq.mm | Metre | 18 |
| Sl.No.1.20.5 E.Deptt. Bihar S/R-18, P-28 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 5 x 1.5 sq.mm | Metre | 23 |
| Sl.No.1.20.6 E.Deptt. Bihar S/R-18, P-28 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 6 x 1.5 sq.mm | Metre | 26 |
| Sl.No.1.20.7 E.Deptt. Bihar S/R-18, P-28 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 7 x 1.5 sq.mm | Metre | 34 |
| Sl.No.1.20.8 E.Deptt. Bihar S/R-18, P-28 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 8 x 1.5 sq.mm | Metre | 36 |
| Sl.No.1.20.9 E.Deptt. Bihar S/R-18, P-28 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 9 x 1.5 sq.mm | Metre | 44 |
| Sl.No.1.20.10 E.Deptt. Bihar S/R-18, P-28 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 1 x 1.5 sq.mm | Metre | 47 |
| Sl.No.1.20.11 E.Deptt. Bihar S/R-18, P-28 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 2 x 2.5 sq.mm | Metre | 13 |
| Sl.No.1.20.12 E.Deptt. Bihar S/R-18, P-28 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 3 x 2.5 sq.mm | Metre | 19 |
| Sl.No.1.20.13 E.Deptt. Bihar S/R-18, P-28 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 4 x 2.5 sq.mm | Metre | 23 |
| Sl.No.1.20.14 E.Deptt. Bihar S/R-18, P-28 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 5 x 2.5 sq.mm | Metre | 30 |
| Sl.No.1.20.15 E.Deptt. Bihar S/R-18, P-28 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 6 x 2.5 sq.mm | Metre | 33 |
| Sl.No.1.20.16 E.Deptt. Bihar S/R-18, P-28 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 7 x 2.5 sq.mm | Metre | 42 |
| Sl.No.1.20.17 E.Deptt. Bihar S/R-18, P-28 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 8 x 2.5 sq.mm | Metre | 46 |
| Sl.No.1.20.18 E.Deptt. Bihar S/R-18, P-28 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 9 x 2.5 sq.mm | Metre | 55 |
| Sl.No.1.20.19 E.Deptt. Bihar S/R-18, P-28 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 9 x 2.5 sq.mm | Metre | 59 |
| Sl.No.1.20.20 E.Deptt. Bihar S/R-18, P-29 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 1 x 4 sq.mm | Metre | 22 |
| Sl.No.1.20.21 E.Deptt. Bihar S/R-18, P-29 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 3 x 4 sq.mm | Metre | 27 |
| Sl.No.1.20.29 E.Deptt. Bihar S/R-18, P-30 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 2 x 6 sq.mm | Metre | 34 |
| Sl.No.1.20.30 E.Deptt. Bihar S/R-18, P-30 | Supplying and drawing following size of PVC insulated aluminium conductor, single core cable in the existing surface/recessed PVC conduit as required. 3 x 6 sq.mm | Metre | 44 |
| Code No. 1.21.1 E. Deptt. Bihar S/R-18, P-29 | Supplying and fixing of 20mm sizes of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. | Metre | 55 |
| Code No. 1.21.2 E. Deptt. Bihar S/R-18, P-29 | Supplying and fixing of 25mm sizes of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. | Metre | 69 |
| Code No. 1.21.3 E. Deptt. Bihar S/R-18, P-29 | Supplying and fixing of 32mm sizes of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. | Metre | 109 |
| Code No. 1.21.4 E. Deptt. Bihar S/R-18, P-29 | Supplying and fixing of 40mm sizes of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. | Metre | 137 |
| Code No. 1.21.5 E. Deptt. Bihar S/R-18, P-29 | Supplying and fixing of 50mm sizes of PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. | Metre | 218 |
| Sl.No.1.22.1 E.Deptt. Bihar S/R-18, P-30 | Supplying and fixing metal/PVC box of following sizes (nominal size) on surface or in recess with suitable size of phanolic laminated sheet cover in front including painting etc. as required. 75 mm x 75 mm x 50 mm deep | Each | 93 |
| Sl.No.1.22.2 E.Deptt. Bihar S/R-18, P-30 | Supplying and fixing metal/PVC box of following sizes (nominal size) on surface or in recess with suitable size of phanolic laminated sheet cover in front including painting etc. as required. 100 mm x 100 mm x 60 mm deep | Each | 140 |
| Sl.No.1.22.3 E.Deptt. Bihar S/R-18, P-30 | Supplying and fixing metal/PVC box of following sizes (nominal size) on surface or in recess with suitable size of phanolic laminated sheet cover in front including painting etc. as required. 150 mm x 75 mm x 60 mm deep | Each | 116 |
| Sl.No.1.22.4 E.Deptt. Bihar S/R-18, P-30 | Supplying and fixing metal/PVC box of following sizes (nominal size) on surface or in recess with suitable size of phanolic laminated sheet cover in front including painting etc. as required. 150 mm x 150 mm x 60 mm deep | Each | 166 |
| Sl.No.1.22.5 E.Deptt. Bihar S/R-18, P-30 | Supplying and fixing metal/PVC box of following sizes (nominal size) on surface or in recess with suitable size of phanolic laminated sheet cover in front including painting etc. as required. 180 mm x 100 mm x 60 mm deep | Each | 132 |
| Sl.No.1.22.6 E.Deptt. Bihar S/R-18, P-30 | Supplying and fixing metal/PVC box of following sizes (nominal size) on surface or in recess with suitable size of phanolic laminated sheet cover in front including painting etc. as required. 200 mm x 150 mm x 60 mm deep | Each | 193 |
| Sl.No.1.22.7 E.Deptt. Bihar S/R-18, P-30 | Supplying and fixing metal/PVC box of following sizes (nominal size) on surface or in recess with suitable size of phanolic laminated sheet cover in front including painting etc. as required. 200 mm x 250 mm x 60 mm deep | Each | 259 |
| Sl.No.1.22.9 E.Deptt. Bihar S/R-18, P-30 | Supplying and fixing metal/PVC box of following sizes (nominal size) on surface or in recess with suitable size of phanolic laminated sheet cover in front including painting etc. as required. 250 mm x 300 mm x 60 mm deep | Each | 372 |
| Sl.No.1.22.8 E.Deptt. Bihar S/R-18, P-30 | Supplying and fixing metal/PVC box of following sizes (nominal size) on surface or in recess with suitable size of phanolic laminated sheet cover in front including painting etc. as required. 200 mm x 300 mm x 60 mm deep | Each | 321 |
| Sl.No.1.23.1 E.Deptt. Bihar S/R-18, P-30 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps | Each | 39 |
| Sl.No.1.23.3 E.Deptt. Bihar S/R-18, P-28 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 15/16 amps | Each | 83 |
| Sl.No.1.23.4 E.Deptt. Bihar S/R-18, P-30 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps, 3 pin socket outlet | Each | 52 |
| Sl.No.1.23.6 E.Deptt. Bihar S/R-18, P-30 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 15/16 amps, 6 pin S.S.combined | Each | 62 |
| Sl.No.1.23.7 E.Deptt. Bihar S/R-18, P-31 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. Telephone socket with shutter outlet | Each | 52 |
| Sl.No.1.23.8 E.Deptt. Bihar S/R-18, P-32 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. T.V, antenna socket outlet | Each | 44 |
| Sl.No.1.23.9 E.Deptt. Bihar S/R-18, P-30 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. Electronic step fan regulator, mini. | Each | 219 |
| Sl.No.1.24.1 E.Deptt. Bihar S/R-18, P-31 | Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection but excluding modular plate etc. as required. 5/6 amps switch | Each | 81 |
| Sl.No.1.24.2 E.Deptt. Bihar S/R-18, P-31 | Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection but excluding modular plate etc. as required. 2 way, 5/6 amps switch | Each | 111 |
| Sl.No.1.24.3 E.Deptt. Bihar S/R-18, P-31 | Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection but excluding modular plate etc. as required. 15/16 amps switch | Each | 134 |
| Sl.No.1.24.4 E.Deptt. Bihar S/R-18, P-31 | Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection bu excluding modular plate etc. as required. 3 pin , 5/6 amps socket outlet | Each | 122 |
| Sl.No.1.24.5 E.Deptt. Bihar S/R-18, P-31 | Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection bu excluding modular plate etc. as required. 16/20 amps, 6 pin socket outlet | Each | 171 |
| Sl.No.1.24.6 E.Deptt. Bihar S/R-18, P-31 | Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection bu excluding modular plate etc. as required. Telephone socket outlet | Each | 103 |
| Sl.No.1.24.7 E.Deptt. Bihar S/R-18, P-31 | Supplying and fixing following modular type switch/socket o the existing modular plate and switch box including connection bu excluding modular plate etc. as required. TV antenna socket outlet | Each | 102 |
| Sl.No.1.25 E.Deptt. Bihar S/R-18, P-31 | Supplying and fixing stepped type electronic fan regulatoron th existing modular plate switch box including connections but excluding modular plate etc. as required. | Each | 359 |
| Sl.No.1.26 E.Deptt. Bihar S/R-18, P-31 | Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required. | Each | 24 |
| Sl.No.1.27.1 E.Deptt. Bihar S/R-18, P-31 | Supplying and fixing following size/modules G.I. box along with modular base & cover plate for modular switches in recess etc. as required. 1 ro 2 modular (78mm x 78mm x 45mm) | Each | 167 |
| Sl.No.1.27.2 E.Deptt. Bihar S/R-18, P-31 | Supplying and fixing following size/modules G.I. box along with modular base & cover plate for modular switches in recess etc. as required. 3 modular (78mm x 100mm x 45mm) | Each | 192 |
| Sl.No.1.27.3 E.Deptt. Bihar S/R-18, P-32 | Supplying and fixing following size/modules G.I. box along with modular base & cover plate for modular switches in recess etc. as required. 4/5 modular (78mm x 140mm x 50mm) | Each | 214 |
| Sl.No.1.27.4 E.Deptt. Bihar S/R-18, P-32 | Supplying and fixing following size/modules G.I. box along with modular base & cover plate for modular switches in recess etc. as required. 6 modular (78mm x 205mm x 50mm) | Each | 270 |
| Sl.No.1.27.5 E.Deptt. Bihar S/R-18, P-32 | Supplying and fixing following size/modules G.I. box along with modular base & cover plate for modular switches in recess etc. as required. 8/9 modular (78mm x 230mm x 60mm) | Each | 339 |
| Sl.No.1.27.6 E.Deptt. Bihar S/R-18, P-32 | Supplying and fixing following size/modules G.I. box along with modular base & cover plate for modular switches in recess etc. as required. 12 modular (135mm x 205mm x 60mm) | Each | 410 |
| Sl.No.1.28.1 E.Deptt. Bihar S/R-18, P-32 | Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required. 1 module | Each | 79 |
| Sl.No.1.28.2 E.Deptt. Bihar S/R-18, P-32 | Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required. 2 module | Each | 81 |
| Sl.No.1.28.3 E.Deptt. Bihar S/R-18, P-32 | Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required. 3 module | Each | 93 |
| Sl.No.1.28.4 E.Deptt. Bihar S/R-18, P-32 | Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required. 4 module | Each | 103 |
| Sl.No.1.28.5 E.Deptt. Bihar S/R-18, P-32 | Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required. 6 module | Each | 133 |
| Sl.No.1.28.6 E.Deptt. Bihar S/R-18, P-32 | Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required. 8 module | Each | 174 |
| Sl.No.1.28.7 E.Deptt. Bihar S/R-18, P-32 | Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required. 12 module | Each | 213 |
| Code No. 1.29 E. Deptt. Bihar S/R-18, P-32 | Supplying and fixing suitable size metal./pvc. box of 150 mm x 75 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connections, painting etc. as required. | Each | 187 |
| Sl.No. 1.30 E.Deptt. Bihar S/R-18,P-33 | Supplying and fixing suitable size metal./pvc. box of 180 mm x 100 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connections, painting etc. as required. | Each | 286 |
| Sl.No.1.31 E.Deptt. Bihar S/R-18, P-33 | Supplying and fixing suitable size G.I. Box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection etc. as required. | Each | 362 |
| Sl.No.1.32 E.Deptt. Bihar S/R-18, P-33 | Supplying and fixing suitable size G.I. Box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch connection, painting etc. as required. | Each | 413 |
| Code No. 1.33 E. Deptt. Bihar S/R-18, P-33 | Supplying and fixing 2 Pin, 6 amps ceilling rose on the existing Junction box / wooden block including connection etc. as required. | Each | 42 |
| Code No. 1.34 E. Deptt. Bihar S/R-18, P-33 | Supplying and fixing batten/ angle holder including connection etc. as required. | Each | 46 |
| Code No. 1.35 E. Deptt. Bihar S/R-18, P-34 | Erection of wall bracket/ ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required. | Each | 46 |
| Code No. 1.36 E. Deptt. Bihar S/R-18, P-34 | Supplying and fixing call bell/buzzer suitable for single phase, 230 volts, complete as required. | Each | 80 |
| Code No. 1.37 E. Deptt. Bihar S/R-18, P-34 | Supplying and fixing ding dong call bell suitable for single phase, 230 volts, complete as rerquired. | Each | 138 |
| Code No. 1.38 E. Deptt. Bihar S/R-18, P-34 | Supplying and fixing electronic musical call bell suitable for single phase, 230 volt complete bell as required. | Each | 219 |
| Code No. 1.39 E. Deptt. Bihar S/R-18, P-34 | Providing and fixing plain 16/0.20 mm (0.50 sq.mm) twin, flexible, FR PVC insulated, copper cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required. | Metre | 18 |
| Code No. 1.40 E. Deptt. Bihar S/R-18, P-34 | Providing and fixing plain 16/0.20 mm (0.50 sq.mm) twin,circular flexible, FR PVC insulated, PVC sheathed copper cable, direct on the wall with PVC clips etc. as required. | Metre | 23 |
| Code No. 1.41 E. Deptt. Bihar S/R-18, P-34 | Installation, testing and commissioning of pre-wires, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directy on ceiling/ wall, including connection with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required. | Each | 84 |
| Code No1.42 E.Deppt.Bihar S/R-18 P-35 | Installation, testing and commissioning of pre-wired fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia x 1.6 mm thick G.I.pipe up to 30 cm length, painting and wiring the down rods and connection with 1.5 qu. mm. FR PVC insulated, copper conductor, single core cable and earthing etc. as required. | Each | 333 |
| Code No. 1.43 E. Deptt. Bihar S/R-18, P-35 | Providing and fixing extra conduit down rod of 20 mm dia, 2 x 10 cm length wiring with 2 x 1.5 sq.mm FR PVC insulated, copper conductor, single core cable including painting etc. as required. (Note: more than 5 cm. length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored). | Each | 53 |
| Code No1.44 E.Deppt.Bihar S/R-18 P-35 | I.T.C of ceiling fan including wiring the down rods of stndard length (Upto30 cm) with 1.5 sq FR PVC insulated, copper conductor, single core cable etc.as required. | Each | 85 |
| Code No1.45 E.Deppt.Bihar S/R-18 P-35 | I.T.C of ceiling fan including wiring the down rods of stndard length (Upto30 cm) with 1.5 sq FR PVC insulated, copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. | Each | 119 |
| Code No1.46 E.Deppt.Bihar S/R-18 P-36 | I.T.C of Resistance type ceiling fan regulator, in existing swich box including connection with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable, earthing the regulator etc. as required. | Each | 36 |
| Code No1.47 E.Deppt.Bihar S/R-18 P-37 | Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy guage including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored). | Each | 35 |
| Code No1.48 E.Deppt.Bihar S/R-18 P-38 | Supplying and fixing extra down rod of 10 cm length G.I. pipe, 20 mm dia, heavy guage including painting etc. as required. (Note: More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored). | Each | 38 |
| Code No1.49 E.Deppt.Bihar S/R-18 P-39 | Numbering of ceiling fan/exhaust fan/ fluorescent fittings as required. | Each | 26 |
| Code No1.50.1 E.Deppt.Bihar S/R-18 P-36 | Installation of exhaust fan in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as requiredupto 450 mm sweep | Each | 151 |
| Code No1.50.2 E.Deppt.Bihar S/R-18 P-37 | Installation of exhaust fan in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as requiredupto 510 mm sweep | Each | 203 |
| Code No1.51 E.Deppt.Bihar S/R-18 P-32 | Extra for fixing the louvers/shutters complete with frame for a exhaust fan of all sizes. | Each | 59 |
| Code No1.52 E.Deppt.Bihar S/R-18 P-33 | Painting of ceiling fan in installed position with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent etc. as required. | Each | 66 |
| Sl. No. 2.1.1 E.Deptt Bihar S/R-18, P-37 | Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with rewireable type fuses, including drilling holes in metal board, making connections etc. as required. 16 Amp double pole | Each | 550 |
| Sl. No. 2.1.2 E.Deptt Bihar S/R-18, P-37 | Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with rewireable type fuses, including drilling holes in metal board, making connections etc. as required. 32 Amp double pole | Each | 1153 |
| Sl. No. 2.1.3 E.B.C Deptt Bihar S/R-18, P-37 | Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with rewireable type fuses, including drilling holes in metal board, making connections etc. as required. 63 Amp double pole | Each | 2838 |
| Sl. No. 2.1.4 E.Deptt Bihar S/R-18, P-37 | Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with rewireable type fuses, including drilling holes in metal board, making connections etc. as required. 32 Amp TP&N | Each | 1938 |
| E.Deptt. Sl.No.- 2.1.5 P-37 Govt of Bihar | Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with rewireable type fuses, including drilling holes in metal board, making connections etc. as required. 63Amp TP&N | Each | 3752 |
| Sl. No. 2.1.6 E.Deptt Bihar S/R-18, P-37 | Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with rewireable type fuses, including drilling holes in metal board, making connections etc. as required. 100 Amp TP&N | Each | 6768 |
| E.Deptt. Sl.No.- 2.1.7 P-37 Govt of Bihar | Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with rewireable type fuses, including drilling holes in metal board, making connections etc. as required. 200Amp TP&N | Each | 11162 |
| E.Deptt. Sl.No.- 2.1.8 P-37 Govt of Bihar | Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with rewireable type fuses, including drilling holes in metal board, making connections etc. as required. 320Amp TP&N | Each | 16017 |
| E.Deptt. Sl.No.- 2.2.1 P-37 Govt of Bihar | Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with ISI marked HRC fuse, including drilling holes in metal board, making connections etc. as required. 63 Amp TP&N,HRC | Each | 4219 |
| E.Deptt. Sl.No.- 2.2.2 P-37 Govt of Bihar | Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with ISI marked HRC fuse, including drilling holes in metal board, making connections etc. as required. 100 Amp TP&N,HRC | Each | 7812 |
| E.Deptt. Sl.No.- 2.2.3 P-37 Govt of Bihar | Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with ISI marked HRC fuse, including drilling holes in metal board, making connections etc. as required. 200 Amp TP&N,HRC | Each | 12466 |
| E.Deptt. Sl.No.- 2.2.4 P-37 Govt of Bihar | Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with ISI marked HRC fuse, including drilling holes in metal board, making connections etc. as required. 320 Amp TP&N,HRC | Each | 14922 |
| E.Deptt. Sl.No.- 2.2.5 P-37 Govt of Bihar | Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with ISI marked HRC fuse, including drilling holes in metal board, making connections etc. as required. 400 Amp TP&N,HRC | Each | 22378 |
| E.Deptt. Sl.No.- 2.2.6 P-37 Govt of Bihar | Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with ISI marked HRC fuse, including drilling holes in metal board, making connections etc. as required. 500 Amp TP&N,HRC | Each | 30120 |
| E.Deptt. Sl.No.- 2.2.7 P-37 Govt of Bihar | Providing and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metel board with ISI marked HRC fuse, including drilling holes in metal board, making connections etc. as required. 800 Amp TP&N,HRC | Each | 37503 |
| E.Deptt. Sl.No.- 2.3.1. P-38 Govt of Bihar | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 32 amps TP&N | Each | 1490 |
| E.Deptt. Sl.No.- 2.3.2. P-38 Govt of Bihar | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 63 amps TP&N | Each | 2124 |
| E.Deptt. Sl.No.- 2.3.3. P-38 Govt of Bihar | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 100 amps TP&N | Each | 4449 |
| E.Deptt. Sl.No.- 2.3.4. P-38 Govt of Bihar | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 125 amps TP&N | Each | 4761 |
| E.Deptt. Sl.No.- 2.3.5. P-38 Govt of Bihar | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 160 amps TP&N | Each | 5754 |
| E.Deptt. Sl.No.- 2.3.6. P-38 Govt of Bihar | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 200 amps TP&N | Each | 6710 |
| E.Deptt. Sl.No.- 2.3.7. P-38 Govt of Bihar | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 250 amps TP&N | Each | 8124 |
| E.Deptt. Sl.No.- 2.3.8. P-38 Govt of Bihar | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 320 amps TP&N | Each | 10820 |
| E.Deptt. Sl.No.- 2.3.9. P-38 Govt of Bihar | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 400 amps TP&N | Each | 12574 |
| E.Deptt. Sl.No.- 2.3.10. P-38 Govt of Bihar | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board, with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 630 amps TP&N | Each | 22459 |
| E.Deptt. Sl.No.- 2.4.1 P-38 Govt of Bihar | Providing and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required. 25/100 amps, 10 KA | Each | 2158 |
| E.Deptt. Sl.No.- 2.4.2 P-38 Govt of Bihar | Providing and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required.. 25/100 amps, 16 KA | Each | 3254 |
| E.Deptt. Sl.No.- 2.4.3 P-38 Govt of Bihar | Providing and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required. 125 amps, 16 KA | Each | 4004 |
| E.Deptt. Sl.No.- 2.4.4 P-38 Govt of Bihar | Providing and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required. 160 amps, 35 KA | Each | 9787 |
| E.Deptt. Sl.No.- 2.4.5 P-38 Govt of Bihar | Providing and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required. 200 amps, 35 KA | Each | 11915 |
| E.Deptt. Sl.No.- 2.4.6 P-38 Govt of Bihar | Providing and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required. 250 amps, 35 KA | Each | 14598 |
| E.Deptt. Sl.No.- 2.4.7 P-38 Govt of Bihar | Providing and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required. 315 amps, 35 KA | Each | 17957 |
| E.Deptt. Sl.No.- 2.4.8 P-38 Govt of Bihar | Providing and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required. 400 amps, 35 KA | Each | 19697 |
| E.Deptt. Sl.No.- 2.4.9 P-38 Govt of Bihar | Providing and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required. 500 amps, 35 KA | Each | 23084 |
| E.Deptt. Sl.No.- 2.4.10 P-34 Govt of Bihar | Providing and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required. 630 amps, 35/50 KA | Each | 24910 |
| E.Deptt. Sl.No.- 2.4.11 P-34 Govt of Bihar | Providing and fixing following rating & breaking capacity MCCB in existing cubicle panel board, including drilling holes in cubicle panel, making connections, etc. as required. 800 amps, 35/50 KA | Each | 30139 |
| Sl. No. 2.5.1 E.Deptt Bihar S/R-18, P-39 | Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required. 63 Amps. | Each | 2861 |
| Sl. No. 2.5.2 E.Deptt Bihar S/R-18, P-39 | Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required. 100 Amps. | Each | 3684 |
| Sl. No. 2.5.3 E.Deptt Bihar S/R-18, P-39 | Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required. 200 Amps. | Each | 7742 |
| Sl. No. 2.5.4 E.Deptt Bihar S/R-18, P-40 | Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required. 300 Amps. | Each | 9546 |
| Sl. No. 2.5.5E.Deptt Bihar S/R-18, P-39 | Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required. 400 Amps. | Each | 15655 |
| Sl. No. 2.5.6E.Deptt Bihar S/R-18, P-39 | Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required. 500 Amps. | Each | 19549 |
| Sl. No. 2.5.7E.Deptt Bihar S/R-18, P-40 | Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required. 600 Amps. | Each | 24411 |
| Sl. No. 2.5.8E.Deptt Bihar S/R-18, P-40 | Providing and fixing following capacity busbar Chamber with 4 strips of suitable size made of copper, heavy duty complete with all accessories including connections, earthing the body etc. as required. 800 Amps. | Each | 25359 |
| Sl.No.2.6.1 E.Deptt. Bihar S/R-18, P-39 | Providing and fixing following capacity double pole/ 4 pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal metal panel, making connection etc. as required. 32 amps, double pole | Each | 1206 |
| Sl.No.2.6.2 E.Deptt. Bihar S/R-18, P-39 | Providing and fixing following capacity double pole/ 4 pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal metal panel, making connection etc. as required. 63 amps, double pole | Each | 2236 |
| Sl.No.2.6.3 E.Deptt. Bihar S/R-18, P-39 | Providing and fixing following capacity double pole/ 4 pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal metal panel, making connection etc. as required. 32 amps, four pole | Each | 1948 |
| Sl. No. 2.6.4 E.Deptt Bihar S/R-18, P-39 | Providing and fixing following capacity double pole/ 4 pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal metal panel, making connection etc. as required. 63amps, four Pole | Each | 4176 |
| Sl. No. 2.6.5 E.Deptt Bihar S/R-18, P-40 | Providing and fixing following capacity double pole/ 4 pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal metal panel, making connection etc. as required. 100amps, four Pole | Each | 7814 |
| Sl. No. 2.6.6E.Deptt Bihar S/R-18, P-40 | Providing and fixing following capacity double pole/ 4 pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal metal panel, making connection etc. as required. 200amps, four Pole | Each | 11831 |
| Sl. No. 2.6.7E.Deptt Bihar S/R-18, P-41 | Providing and fixing following capacity double pole/ 4 pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal metal panel, making connection etc. as required. 320amps, four Pole | Each | 15238 |
| Sl. No. 2.6.8E.Deptt Bihar S/R-18, P-42 | Providing and fixing following capacity double pole/ 4 pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal metal panel, making connection etc. as required. 400amps, four Pole | Each | 17529 |
| Sl. No. 2.6.9E.Deptt Bihar S/R-18, P-43 | Providing and fixing following capacity double pole/ 4 pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board including drilling holes in metal metal panel, making connection etc. as required. 630amps, four Pole | Each | 35661 |
| E.Deptt. Sl.No.- 2.7.1 P-40 Govt of Bihar | Providing and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required. 40 amps, four pole | Each | 3503 |
| E.Deptt. Sl.No.- 2.7.2 P-40 Govt of Bihar | Providing and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required. .63 amps, four pole | Each | 3716 |
| E.Deptt. Sl.No.- 2.7.3 P-40 Govt of Bihar | Providing and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required. .100 amps, four pole | Each | 4878 |
| E.Deptt. Sl.No.- 2.7.4 P-40 Govt of Bihar | Providing and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required. 125 amps, four pole | Each | 7252 |
| E.Deptt. Sl.No.- 2.7.5 P-40 Govt of Bihar | Providing and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required. 160 amps, four pole | Each | 7903 |
| E.Deptt. Sl.No.- 2.7.6 P-40 Govt of Bihar | Providing and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required. .200 amps, four pole | Each | 9463 |
| E.Deptt. Sl.No.- 2.7.7 P-40 Govt of Bihar | Providing and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required. 250 amps, four pole | Each | 11636 |
| E.Deptt. Sl.No.- 2.7.8 P-40 Govt of Bihar | Providing and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required. 320 amps, four pole | Each | 14514 |
| E.Deptt. Sl.No.- 2.7.9 P-40 Govt of Bihar | Providing and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required. 400 amps, four pole | Each | 21116 |
| E.Deptt. Sl.No.- 2.7.10 P-40 Govt of Bihar | Providing and fixing following capacity 4 pole ON-load/panel mounted changeover switches inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc. as required. 630 amps, four pole | Each | 24806 |
| E.Deptt. Sl.No.- 2.8.1 P-40 Govt of Bihar | Supplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface recess, complete with tinned copper bus bar, neatral busbar, earth bar din bar interconnections, powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 2+4 Way. single door | Each | 633 |
| E.Deptt. Sl.No.- 2.8.2 P-40 Govt of Bihar | Supplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface recess, complete with tinned copper bus bar, neatral busbar, earth bar dinbar detachable gland plate, interconnections, Phosphatised and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 2+6 Way. single door | Each | 671 |
| Sl. No. 2.8.3 E.Deptt Bihar S/R-18, P-40 | Supplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface recess, complete with tinned copper bus bar, neatral busbar, earth bar dinbar detachable gland plate, interconnections, Phosphatised and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 2+8 way single door | Each | 741 |
| Sl. No. 2.8.4 E.Deptt Bihar S/R-18, P-40 | Supplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface recess, complete with tinned copper bus bar, neatral busbar, earth bar dinbar detachable gland plate, interconnections, Phosphatised and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 2+10 way single door | Each | 887 |
| Sl. No. 2.8.5 E.Deptt Bihar S/R-18, P-40 | Supplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface recess, complete with tinned copper bus bar, neatral busbar, earth bar dinbar detachable gland plate, interconnections, Phosphatised and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 2+12 way single door | Each | 949 |
| Sl. No. 2.8.6 E.Deptt Bihar S/R-18, P-40 | Supplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface recess, complete with tinned copper bus bar, neatral busbar, earth bar dinbar detachable gland plate, interconnections, Phosphatised and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 2+4 way double door | Each | 1004 |
| Sl. No. 2.8.7 E.Deptt Bihar S/R-18, P-40 | Supplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface recess, complete with tinned copper bus bar, neatral busbar, earth bar dinbar detachable gland plate, interconnections, Phosphatised and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 2+6 way double door | Each | 1081 |
| Sl. No. 2.8.8 E.Deptt Bihar S/R-18, P-40 | Supplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface recess, complete with tinned copper bus bar, neatral busbar, earth bar dinbar detachable gland plate, interconnections, Phosphatised and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 2+8 way double door | Each | 1242 |
| Sl. No. 2.8.9 E.Deptt Bihar S/R-18, P-40 | Supplying and fixing following way single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface recess, complete with tinned copper bus bar, neatral busbar, earth bar dinbar detachable gland plate, interconnections, Phosphatised and powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 2+12 way double door | Each | 1315 |
| Code No. 2.9.1 E. Deptt. Bihar S/R-18, P-41 | Suppling and fixing following way horizontal type three pole and neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnection, powder painted including eathing, etc. as required (But without MCB/RECB./ Isolator) 4 way (4+12) single door horizontal type | Each | 1680 |
| Code No. 2.9.2 E. Deptt. Bihar S/R-18, P-41 | Suppling and fixing following way horizontal type three pole and neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnection, powder painted including eathing, etc. as required (But without MCB/RECB./ Isolator) 6 way (4+18) single door horizontal type | Each | 1961 |
| Code No. 2.9.3 E. Deptt. Bihar S/R-18, P-41 | Suppling and fixing following way horizontal type three pole and neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnection, powder painted including eathing, etc. as required (But without MCB/RECB./ Isolator) 8 way (4+24) single door horizontal type | Each | 2152 |
| Sl. No. 2.9.4 E.Deptt Bihar S/R-18, P-40 | Suppling and fixing following way horizontal type three pole and neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnection, powder painted including eathing, etc. as required (But without MCB/RECB./ Isolator)-4way (4+12) double door horizontal type | Each | 2388 |
| Sl. No. 2.9.5 E.Deptt Bihar S/R-18, P-40 | Suppling and fixing following way horizontal type three pole and neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnection, powder painted including eathing, etc. as required (But without MCB/RECB./ Isolator)-6way (4+18) double door horizontal type | Each | 2905 |
| Sl. No. 2.9.6 E.Deptt Bihar S/R-18, P-40 | Suppling and fixing following way horizontal type three pole and neatrel, sheet steel, M.C.B., distribution board, 415 Volts on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnection, powder painted including eathing, etc. as required (But without MCB/RECB./ Isolator)-8way (4+24) double door horizontal type | Each | 3702 |
| Code No2.10.1 E0Deptt.Bihar S/R-18 P-42 | Supplying and fixing following ways, surface/recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amp tinned copper bus bar, common neutral link, earth bar, din bar, for mounting MCB's (but without MCB's and incomer) as required. (Note :Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (8+12), Single door, Vertical type | Each | 5920 |
| Code No2.10.2 E0Deptt.Bihar S/R-18 P-42 | Supplying and fixing following ways, surface/recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amp tinned copper bus bar, common neutral link, earth bar, din bar, for mounting MCB's (but without MCB's and incomer) as required. (Note :Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (8+24), Single door, Vertical type | Each | 7851 |
| Code No2.10.3 E0Deptt.Bihar S/R-18 P-43 | Supplying and fixing following ways, surface/recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amp tinned copper bus bar, common neutral link, earth bar, din bar, for mounting MCB's (but without MCB's and incomer) as required. (Note :Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 12 way (8+36), Single door, Vertical type | Each | 9523 |
| Code No2.10.4 E0Deptt.Bihar S/R-18 P-44 | Supplying and fixing following ways, surface/recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amp tinned copper bus bar, common neutral link, earth bar, din bar, for mounting MCB's (but without MCB's and incomer) as required. (Note :Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (8+12), Double door, Vertical type | Each | 7749 |
| Code No2.10.5 E0Deptt.Bihar S/R-18 P-45 | Supplying and fixing following ways, surface/recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amp tinned copper bus bar, common neutral link, earth bar, din bar, for mounting MCB's (but without MCB's and incomer) as required. (Note :Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (8+24), Double door, Vertical type | Each | 8932 |
| Code No2.10.6 E0Deptt.Bihar S/R-18 P-46 | Supplying and fixing following ways, surface/recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amp tinned copper bus bar, common neutral link, earth bar, din bar, for mounting MCB's (but without MCB's and incomer) as required. (Note :Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 12 way (8+36), Double door, Vertical type | Each | 10514 |
| Sl. No. 2.12.1 E.Deptt Bihar S/R-18, P-42 | Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 6/32 amps, Single Pole | Each | 192 |
| Sl. No. 2.12.2 E.Deptt Bihar S/R-18, P-43 | Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 6/32 amps, SPN | Each | 511 |
| Sl. No. 2.12.3 E.Deptt Bihar S/R-18, P-42 | Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 40 amps, Single Pole and neutral | Each | 729 |
| Sl. No. 2.12.4 E.Deptt Bihar S/R-18, P-42 | Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 50/63 amps, Single pole and neutral | Each | 825 |
| Sl. No. 2.12.5 E.Deptt Bihar S/R-18, P-42 | Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 6/32 amps,Tripole pole and neutral | Each | 1108 |
| Sl. No. 2.12.6 E.Deptt Bihar S/R-18, P-42 | Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 40 amps, Tripole pole and neutral | Each | 1487 |
| Sl. No. 2.12.7 E.Deptt Bihar S/R-18, P-42 | Supplying and fixing following rating 240/415 volts "C" curve mainiature Circuit Breaker suitable for inductive load of Following poles in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 50/63 amps, Tripole pole and neutral | Each | 1635 |
| Sl. No. 2.13.1 E.Deptt Bihar S/R-18, P- 43 | Supplying and fixing following rating, double pole, 240 volts "C" series, mainiature circuit breaker suitable for inductive load in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 6/32 amps, Double pole | Each | 632 |
| Sl. No. 2.13.2 E.Deptt Bihar S/R-18, P- 43 | Supplying and fixing following rating, double pole, 240 volts "C" series, mainiature circuit breaker suitable for inductive load in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 40 amps, Double pole | Each | 860 |
| Sl. No. 2.13.3 E.Deptt Bihar S/R-18, P- 43 | Supplying and fixing following rating, double pole, 240 volts "C" series, mainiature circuit breaker suitable for inductive load in the existing MCB, DB, complete with connections testing and commissioning etc. as required. 50/63 amps, Double pole | Each | 919 |
| Sl. No. 2.14 E.Deptt Bihar S/R-18, P- 43 | Supplying and fixing single pole blaning Plate in existing MCB DB complete etc as required. | Each | 16 |
| Sl. No. 2.15.1 E.Deptt Bihar S/R-18, P-43 | Supplying and fixing following rating double pole, 240 voltas Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amps | Each | 355 |
| Sl. No. 2.15.2 E.Deptt Bihar S/R-18, P-43 | Supplying and fixing following rating double pole, 240 voltas Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amps | Each | 455 |
| Sl. No. 2.16.1 E.Deptt Bihar S/R-18, P-43 | Supplying and fixing following rating four pole, 415 voltas Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps | Each | 495 |
| Sl. No. 2.16.2 E.Deptt Bihar S/R-18, P-43 | Supplying and fixing following rating four pole, 415 voltas Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps | Each | 746 |
| Sl. No. 2.16.3 E.Deptt Bihar S/R-18, P-43 | Supplying and fixing following rating four pole, 415 voltas Isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 80/100 amps | Each | 1022 |
| Sl. No. 2.17.2 E.Deptt Bihar S/R-18, P-44 | Supplying and fixing following rating double pole,(single phase and neutral), 240 volts residual current circuit breaker (RCCB), having a sensitivity current up to 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps | Each | 2180 |
| Sl. No. 2.18.1 E.Deptt Bihar S/R-18, P-45 | Supplying and fixing following rating, TP&N, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 16/25 amps. | Each | 2595 |
| Sl. No. 2.18.2 E.Deptt Bihar S/R-18, P-44 | Supplying and fixing following rating, TP&N, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps. | Each | 2620 |
| Sl. No. 2.18.3 E.Deptt Bihar S/R-18, P-44 | Supplying and fixing following rating, TP&N, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps. | Each | 2941 |
| Code No. 2.19 E. Deptt. Bihar S/R-18, P-44 | Suppling and fixing 20 Amps 240 volt. SPN industrial type socket out let, with 2 pole and earth, metal enclosed plug tope along with 20 amps "C" curves, SP. MCB, in sheet steel enclosure on surface or in recess, with chained metel cover for the socket out let and complete with connection testing and commissioning etc. as required. | Each | 996 |
| Sl. No. 2.20 E.Deptt Bihar S/R-18, P-45 | Providing and fixing M.V. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as required. | Each | 178 |
| Sl. No. 2.21 E.Deptt Bihar S/R-18, P-46 | Providing and fixing H.T.. danger notice plate of 250 mm x 200 mm, made of mild steel, at least 2 mm thick, vitreous enamelled white on both sides and with inscription in single red colour on front side as required. | Each | 220 |
| Sl. No. 2.22 E.Deptt Bihar S/R-18, P-45 | Supplying and fixing wall mounted metal board of welded construction, fabricated with minimum 35 mm x 35 mm x 6 mm angle iron frame work, with 25 mm x 6 mm flat iron as intermediate members including painting etc. as required. | Sq. mtr | 3087 |
| Sl. No. 2.23 E.Deptt Bihar S/R-18, P-45 | Supplying and fixing wall mounted metal board of welded construction, fabricated with minimum 25mm x 25mm x 3mm angle iron frame work, with 20mm x 3mm flat iron as intermediate members including painting etc. as required. | Sq. mtr | 1714 |
| Sl. No. 2.24 E.Deptt Bihar S/R-18, P-45 | Supplying and fixing wall mounted board of welded construction, fabricated with minimum 25 mm x 4 mm angle iron frame work, with intermediate members same size including painting etc. as required. | Sq. mtr | 1631 |
| Sl. No. 2.25 E.Deptt Bihar S/R-18, P-39 | Supplying and fixing 20 amps, 415 volts, TPN industrial type, socket outlet with 4 pole and earth, metal enclosed plug top alongwith 30 amps "C" curve, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. | Each | 1912 |
| Sl. No. 2.26 E.Deptt Bihar S/R-18, P-41 | Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 amps "C" curve, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. | Each | 3157 |
| Sl. No. 3.1 E.Deptt Bihar S/R-18, P-46 | Earthing with GI earth pipe 4.5 meter long and 40 mm dia including accessories, and providing masonary enclosures with cover plate having locking arrangment and watering pipe etc. as required (But without charcoal or coke and salt) . | Per Set | 3196 |
| Sl. No. 3.2 E.B.C Deptt Bihar S/R-18, P-46 | Earthing with GI earth pipe 4.5 meter long and 40 mm dia including accessories, and providing masonary enclosures with cover plate having locking arrangment and watering pipe etc.with charcoal and salt as required . | Per Set | 5125 |
| Sl. No. 3.3 E.Deptt Bihar S/R-18, P-46 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. ( but without charcoal/ coke and salt ) as required. | Per Set | 3785 |
| Sl.No.3.4 E.Deptt. Bihar S/R-18, P-46 | Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. | Per Set | 6276 |
| Sl.No.3.5 E.Deptt. Bihar S/R-18, P-46 | Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc.(but without charcoal or coke and salt) as required. | Per Set | 10341 |
| Sl.No.3.6 E.Deptt. Bihar S/R-18, P-46 | Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/coke and salt as required | Per Set | 12831 |
| Sl. No. 3.7 E.Deptt Bihar S/R-18, P-41 | Supplying and laying 6 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including connection/termination with GI thimble as required. | Metre | 17 |
| Sl. No. 3.8 E.Deptt Bihar S/R-18, P-42 | Supplying and laying 25 mm x 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ termination with nut, bolt, spring, washer etc.as required (jointing shall be done by overlapping with 2 sets of brass nut bolt and & spring washer spaced at 50 mm) | Metre | 898 |
| Sl. No. 3.9 E.Deptt Bihar S/R-18, P-42 | Supplying and laying 25 mm x 6 mm G.I. strip at 0.50 metre below ground as strip earth electrode, including connection/ termination with GI nut, bolt, spring, washer etc.as required (jointing shall be done by overlapping with 2 sets of G.I. nut bolt and & spring washer spaced at 50 mm) | Metre | 108 |
| Sl. No. 3.9 E.Deptt Bihar S/R-09, P-47 Old SR | Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required. | Metre | 108 |
| Sl. No. 3.10 E.Deptt Bihar S/R-18, P-42 | Supplying and laying 25 mm x 5 mm copper strip at 40 mm dia G.I. pipe from earth electrode, including connection with brass nut, bolt, spring, washer excavation and refilling etc.as required | Metre | 1286 |
| Sl. No. 3.11 E.Deptt Bihar S/R-18, P-42 | Supplying and laying 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode, including connection with G.I. nut, bolt, spring, washer excavation and refilling etc.as required | Metre | 487 |
| Sl. No. 3.12 E.B.C. Deptt Bihar S/R-18, P-42 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I.wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and refilling etc. as required. | Metre | 192 |
| Sl. No. 3.13 E.Deptt Bihar S/R-18, P-42 | Supplying and laying earth connections from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and rifilling etc. as required. | Metre | 269 |
| Sl. No. 3.14 E.Deptt Bihar S/R-18, P-42 | Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connection etc. as required. | Metre | 1032 |
| Sl. No. 3.15 E.Deptt Bihar S/R-18, P-42 | Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required. | Metre | 150 |
| Sl. No. 3.16 E.Deptt Bihar S/R-18, P-42 | Providing and fixing 6 SWG dia G.I.wire on surface or in recess for loop earthing as required. | Metre | 38 |
| Sl. No. 3.17 E.Deptt Bihar S/R-18, P-42 | Providing and and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required. | Metre | 116 |
| Sl. No. 3.18 E.Deptt Bihar S/R-18, P-43 | Providing and fixing 6 SWG dia G.I.wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/cable as required. | Metre | 23 |
| Sl. No. 3.19 E.Deptt Bihar S/R-18, P-43 | Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. | Metre | 102 |
| Sl. No. 3.20 E.Deptt Bihar S/R-18, P-43 | Providing and fixiing earth bus of 50 mm x 5 mm copper strip on surface for connection etc. as required. | Mtr. | 1963 |
| Sl. No. 3.21 E.Deptt Bihar S/R-18, P-43 | Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc.as required. | Set | 16586 |
| Sl. No. 4.1 E.Deptt Bihar S/R-18, P-44 | Providing and fixing of lightning conductor final made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes tec. Complete as required. | Each | 930 |
| Sl. No. 4.2 E.Deptt Bihar S/R-18, P-44 | Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I.base plate including holes etc. complete as required. | Each | 188 |
| Sl. No. 4.3 E.Deptt Bihar S/R-18, P-44 | Fixing of lighting conductor finial (single prong) with base plate including holes etc. as required. | Each | 154 |
| Sl. No. 4.4 E.Deptt Bihar S/R-18, P-44 | Jointing copper/ G.I. tape (with another copper/G.I. tape, base of the final or any other metallic object) by riverting/ nut bolting sweating and soldering etc. as required. | Each | 87 |
| Sl. No. 4.5 E.Deptt Bihar S/R-18, P-44 | Providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For Horizontal run) | Metre | 446 |
| Sl. No. 4.6 E.Deptt Bihar S/R-18, P-44 | Providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For vertical run) | Metre | 474 |
| Sl. No. 4.7 E.Deptt Bihar S/R-18, P-44 | Providing and fixing G.I.tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For horizontal run) | Metre | 71 |
| Sl. No. 4.8 E.Deptt Bihar S/R-18, P-44 | Providing and fixing G.I.tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For vertical run) | Metre | 99 |
| Sl. No. 4.9 E.Deptt Bihar S/R-18, P-44 | Fixing of Copper/G.I.tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For horizontal run) | Metre | 33 |
| Sl. No. 4.10 E.Deptt Bihar S/R-18, P-44 | Fixing of Copper/G.I.tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as required. (For vertical run) | Metre | 71 |
| Sl. No. 4.11 E.Deptt Bihar S/R-18, P-45 | Providing and fixing testing joint, made of 20 mm x 3 mm thick copper strip, 125 mm long, with 4 nos. of tinned brass belts, chuk nuts and spring washers etc.complete as required | Each | 247 |
| Sl. No. 4.12 E.Deptt Bihar S/R-18, P-45 | Providing and fixing testing joint, made of 20 mm x 3 mm thick G.I.bolts, nuts, chuk, nuts and spring washers etc. complete as required. | Each | 80 |
| Sl. No. 4.13 E.Deptt Bihar S/R-18, P-45 | Providing and laying copper tape 32 mm x 6 mm from earth electrode directly in ground as required. | Metre | 1335 |
| Sl. No. 4.14 E.Deptt Bihar S/R-18, P-45 | Providing and laying G.I. tape 32 mm x 6 mm from earth electrode directly in ground as required. | Metre | 137 |
| Sl. No. 4.15 E.Deptt Bihar S/R-18, P-45 | Laying copper/ G.I. tape 32 mm x 6 mm from earth electrode directly in ground as required | Metre | 29 |
| Sl. No. 5.1.1 E.Deptt Bihar S/R-18, P-46 | Supplying and fixing powder coated strip/patty type fluorescent fittings of all type complete with all accessories etc. and lamp directly on wall/ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor single core and earthing the body etc. as required. 4' Long with aluminium/ polyster ballast. | Each | 447 |
| Sl. No. 5.1.2 E.Deptt Bihar S/R-18, P-46 | Supplying and fixing powder coated strip/patty type fluorescent fittings of all type complete with all accessories etc. and lamp directly on wall/ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor single core and earthing the body etc. as required. 4' Long with copper ballast. | Each | 519 |
| Sl. No. 5.1.3 E.Deptt Bihar S/R-18, P-46 | Supplying and fixing powder coated strip/patty type fluorescent fittings of all type complete with all accessories etc. and lamp directly on wall/ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor single core and earthing the body etc. as required. 4' Long with Electrical ballast. | Each | 472 |
| Sl. No. 5.2 E.Deptt Bihar S/R-18, P-46 | Supplying and fixing powder coated strip/patty type fluorescent fittings of all type complete with all accessories etc. and lamp directly on wall/ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor single core and earthing the body etc. as required. 2' Long with copper ballast. | Each | 463 |
| Sl. No. 5.3.1 E.Deptt Bihar S/R-46, P- | Supplying and fixing following mounting rail/ box type fluorescent fittings of all type complet with all accessories etc. and lamp directly on wall/ ceiling including connections with1.5 sq. mm. FR PVC insulated copper conducter cable and earthing etc. as required.Single | Each | 517 |
| Sl. No.5.3.2 E.Deptt Bihar S/R-46 | Supplying and fixing following mounting rail/ box type fluorescent fittings of all type complet with all accessories etc. and lamp directly on wall/ ceiling including connections with1.5 sq. mm. FR PVC insulated copper conducter cable and earthing etc. as required.Double | Each | 926 |
| Sl. No.5.4.1 E.Deptt Bihar S/R-46 | Supplying and fixing following decorative surface/ recess mounting CFL/fluorescent fittings with aluminium reflector and all accessories, lamp etc. directly on wall/ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing etc. as required. Single Decorative | Each | 1456 |
| Sl. No.5.4.2 E.Deptt Bihar S/R-46 | Supplying and fixing following decorative surface/ recess mounting CFL/fluorescent fittings with aluminium reflector and all accessories, lamp etc. directly on wall/ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing etc. as required. Double Decorative | Each | 1895 |
| Sl. No.5.5 E.Deptt Bihar S/R-46 | Supplying and fixing FTL (flourescent tube) street light fitting with sheet auminium housing, acrylic cover and copper ballast including 4' x 40 watt FTL etc. on pole/building including connection with FR PVC insulated copper conductor cable and earthing the body etc. as required. | Each | 1940 |
| Sl. No.5.6.1 E.Deptt.Bihar S/R-47 | Supplying and fixing following CFL type street light with with sheet aluminium housing, acrylic cover and copper ballast including PL-L lamps etc. on pole/building including connecion and earthing the body etc. as required with18 watt PL-L lamp fitting | Each | 1760 |
| Sl. No.5.6.2 E.Deptt.Bihar S/R-47 | Supplying and fixing following CFL type street light with with sheet aluminium housing, acrylic cover and copper ballast including PL-L lamps etc. on pole/building including connecion and earthing the body etc. as required with36 watt PL-L lamp fitting | Each | 1064 |
| Sl. No.5.7 E.Deptt.Bihar S/R-47 | Supplying and fixing bulk head fitting die cast aluminium alloy body with prismatic glass cover suitable for the GLS/CFL lamp directly on wall/ Ceilling including connections with 1.5 sq.mm copper conductor cable and earthing the body etc. as required. | Each | 445 |
| Sl. No.5.8.1 E.Deptt.Bihar S/R-47 | Supplying and fixing decorative non-integral post top lantern with UV stablized clear/Opal polycarbonate diffuser suitable for Retrofit CFL lamp, complete with all accessories but without lamp including connection earthing the body etc. as required.(Normally used for garden/gate light) Catgory-'A' | Each | 2746 |
| Sl. No.5.8.2 E.Deptt.Bihar S/R-47 | Supplying and fixing decorative non-integral post top lantern with UV stablized clear/Opal polycarbonate diffuser suitable for Retrofit CFL lamp, complete with all accessories but without lamp including connection earthing the body etc. as required.(Normally used for garden/gate light) Catgory-'B' | Each | 705 |
| Sl. No.5.9.1 E.Deptt.Bihar S/R-47 | Supplying and fixing following powder coated batten for 28 watt 75 flourescent tube complete with electronics ballast and lamp etc. directly on wall/ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor and earthing the body etc. as required.Single | Each | 565 |
| Sl. No.5.9.2 E.Deptt.Bihar S/R-47 | Supplying and fixing following powder coated batten for 28 watt 75 flourescent tube complete with electronics ballast and lamp etc. directly on wall/ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor and earthing the body etc. as requiredDouble | Each | 926 |
| Sl. No.5.9.3 E.Deptt.Bihar S/R-47 | Supplying and fixing single wall mounted 18/22 watt LED type batten fitting complete with electronic driver and LED tube etc directly on wall/ ceiling including connections with 1.5 sq.mm FR PVC insulated copper conductor and earthing the body etc. as required | Each | 684 |
| Sl. No.5.10.1 E.Deptt.Bihar S/R-47 | Supplying and fixing indoor recess mounting decorative mirror optic luminaire with PS parallite louvre and suitable for 2 x 36 Watt FPL/PLL lamp etc. directly on false ceiling, including connection with 1.5 sq,mm FR PVC insulated copper conductor cable and earthing the body etc. as required. | Each | 3342 |
| Sl. No.5.10.2 E.Deptt.Bihar S/R-48 | Supplying and fixing indoor recess mounting decorative mirror optic luminaire with PS parallite louvre and suitable for 3 x 36 Watt FPL/PLL lamp etc. directly on false ceiling, including connection with 1.5 sq,mm FR PVC insulated copper conductor cable and earthing the body etc. as required. | Each | 4144 |
| Sl. No.5.10.3 E.Deptt.Bihar S/R-48 | Supplying and fixing indoor recess mounting 36 watt LED flat panel luminaire suitble for armstrong / gride ceiling and complete with electric driver etc. directly on false ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required. | Each | 4023 |
| Sl. No.5.11.1 E.Deptt.Bihar S/R-48 | Supplying and fixing recess mounted vertical down lighter suitble for single retrofit CFL lamp complete with all accessories and 18 watt CFL lamp directly on false ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required. | Each | 999 |
| Sl. No.5.11.2 E.Deptt.Bihar S/R-48 | Supplying and fixing recess mounted vertical down lighter suitble for 2 x 18 Watt PL-C lamp complete with all accessories and 18 watt CFL lamp directly on false ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required. | Each | 1049 |
| Sl. No.5.11.3 E.Deptt.Bihar S/R-48 | Supplying and fixing recess mounted 6/7 watt LED vertical down lighter complete with all accessories and replaceable electronic driver directly on false ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required. | Each | 671 |
| Sl. No.5.11.4 E.Deptt.Bihar S/R-48 | Supplying and fixing recess mounted 12 watt LED vertical down lighter complete with all accessories and replaceable electronic driver directly on false ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required. | Each | 971 |
| Sl. No.5.11.5 E.Deptt.Bihar S/R-49 | Supplying and fixing recess mounted 18/24 watt LED vertical down lighter complete with all accessories and replaceable electronic driver directly on false ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required. | Each | 1066 |
| Sl. No.5.12.1 E.Deptt.Bihar S/R-49 | Supplying and fixing following Retrofit CFL type street light fitting with sheet aluminium housing, clear acrylic cover and all accessories including Retrofit CFL lamp etc, on pole/building including connection with FR PVC insulated copper conductor cable and earthing the body etc. as required with 35 watt Retrofit CFL lamp | Each | 1547 |
| Sl. No.5.12.2 E.Deptt.Bihar S/R-49 | Supplying and fixing following Retrofit CFL type street light fitting with sheet aluminium housing, clear acrylic cover and all accessories including Retrofit CFL lamp etc, on pole/building including connection with FR PVC insulated copper conductor cable and earthing the body etc. as required with 45 watt Retrofit CFL lamp | Each | 1681 |
| Sl. No.5.12.3 E.Deptt.Bihar S/R-49 | Supplying and fixing following Retrofit CFL type street light fitting with sheet aluminium housing, clear acrylic cover and all accessories including Retrofit CFL lamp etc, on pole/building including connection with FR PVC insulated copper conductor cable and earthing the body etc. as required with 85 watt Retrofit CFL lamp | Each | 1902 |
| Sl. No.5.12.4 E.Deptt.Bihar S/R-49 | Supplying and fixing 20/24 watt LED type street light with die cast aluminium housing for ingress protection of IP65 and complete with all accessories etc. on pole/building including connection with FR PVC insulated copper conductor cable and earthing the body etc. as required. | Each | 2310 |
| Sl. No.5.12.5 E.Deptt.Bihar S/R-49 | Supplying and fixing 40/45 watt LED type street light with die cast aluminium housing for ingress protection of IP65 and complete with all accessories etc. on pole/building including connection with FR PVC insulated copper conductor cable and earthing the body etc. as required. | Each | 4056 |
| Sl. No.5.12.6 E.B.C. Deptt.Bihar S/R-49 | Supplying and fixing 90 watt LED type street light with die cast aluminium housing for ingress protection of IP65 and complete with all accessories etc. on pole/building including connection with FR PVC insulated copper conductor cable and earthing the body etc. as required. | Each | 8437 |
| Sl. No.5.13.1 E.Deptt.Bihar S/R-50 | Supplying and fixing following HPSV/MH street light luminior with high pressure dia cast aluminium housing, POT optics reflector and toughened flat glass offering (IP65) ingress protection suitable for HPSV/Metal halide lamp and complete with all accessories including lamp, connection etc. as required with 70 watt HPSV lamp. | Each | 2945 |
| Sl. No.5.13.2 E.Deptt.Bihar S/R-50 | Supplying and fixing following HPSV/MH street light luminior with high pressure dia cast aluminium housing, POT optics reflector and toughened flat glass offering (IP65) ingress protection suitable for HPSV/Metal halide lamp and complete with all accessories including lamp, connection etc. as required with 150 watt HPSV lamp. | Each | 4420 |
| Sl. No.5.13.3 E.Deptt.Bihar S/R-50 | Supplying and fixing following HPSV/MH street light luminior with high pressure dia cast aluminium housing, POT optics reflector and toughened flat glass offering (IP65) ingress protection suitable for HPSV/Metal halide lamp and complete with all accessories including lamp, connection etc. as required with 250 watt HPSV lamp. | Each | 4844 |
| Sl. No.5.13.4 E.Deptt.Bihar S/R-50 | Supplying and fixing following HPSV/MH street light luminior with high pressure dia cast aluminium housing, POT optics reflector and toughened flat glass offering (IP65) ingress protection suitable for HPSV/Metal halide lamp and complete with all accessories including lamp, connection etc. as required with 400 watt HPSV lamp. | Each | 5657 |
| Sl. No.5.13.5 E.Deptt.Bihar S/R-50 | Supplying and fixing following HPSV/MH street light luminior with high pressure dia cast aluminium housing, POT optics reflector and toughened flat glass offering (IP65) ingress protection suitable for HPSV/Metal halide lamp and complete with all accessories including lamp, connection etc. as required with 150 watt Metal Halide lamp. | Each | 4566 |
| Sl. No.5.13.6 E.Deptt.Bihar S/R-50 | Supplying and fixing following HPSV/MH street light luminior with high pressure dia cast aluminium housing, POT optics reflector and toughened flat glass offering (IP65) ingress protection suitable for HPSV/Metal halide lamp and complete with all accessories including lamp, connection etc. as required with 250 watt Metal Halide lamp. | Each | 5192 |
| Sl. No.5.13.7 E.Deptt.Bihar S/R-50 | Supplying and fixing following HPSV/MH street light luminior with high pressure dia cast aluminium housing, POT optics reflector and toughened flat glass offering (IP65) ingress protection suitable for HPSV/Metal halide lamp and complete with all accessories including lamp, connection etc. as required with 400 watt Metal Halide lamp. | Each | 5980 |
| Sl. No.5.13.8 E.Deptt.Bihar S/R-50 | Supplying and fixing integral FLOOD light luminior with high pressure dia cast aluminium housing, asymmetrical optics glass cover and offering (IP65) ingress protection suitable for 250 watt Metal halide lamp and complete with all accessories including lamp, connection etc. as required with 250 watt Metal Halide lamp. | Each | 5209 |
| Sl. No.5.13.9 E.Deptt.Bihar S/R-50 | Supplying and fixing integral FLOOD light luminior with high pressure dia cast aluminium housing, asymmetrical optics glass cover and offering (IP65) ingress protection suitable for 250 watt Metal halide lamp and complete with all accessories including lamp, connection etc. as required with 400 watt Metal Halide lamp. | Each | 5980 |
| Sl. No.5.13.10 E.Deptt.Bihar S/R-50 | Supplying and fixing 90 watt LED type FLOOD light with dia cast aluminium housing for ingress protection of IP65 and complete with all accessories etc. and connection with FR PVC insulated copper conductor cable and earthing the body etc. as required. | Each | 8501 |
| Sl. No.5.13.11 E.Deptt.Bihar S/R-50 | Supplying and fixing following LED street/ Flood light with die cast aluminium housing for ingress protection of IP65 and complete with all accessories etc on pole/ building including connection and earthing the body etc. as required. 65/70 watt Street light | Each | 5570 |
| Sl. No. 6.1.1 E.Deptt Bihar S/R-51 | Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.100 watt GLS clear lamp. | Each | 23 |
| Sl. No. 6.1.2 E.Deptt Bihar S/R-51 | Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.2'x20 watt tube light. | Each | 49 |
| Sl. No. 6.1.3 E.Deptt Bihar S/R-51 | Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.4'x40 watt tube light. | Each | 51 |
| Sl. No. 6.1.4 E.Deptt Bihar S/R-51 | Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.5 watt CFL lamp. | Each | 128 |
| Sl. No. 6.1.5 E.Deptt Bihar S/R-51 | Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.8/11 watt CFL lamp. | Each | 148 |
| Sl. No. 6.1.6 E.Deptt Bihar S/R-51 | Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.14/15 watt CFL lamp. | Each | 154 |
| Sl. No. 6.1.7 E.Deptt Bihar S/R-51 | Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.18 watt CFL lamp. | Each | 221 |
| Sl. No. 6.1.8 E.Deptt Bihar S/R-51 | Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.20 watt CFL lamp. | Each | 221 |
| Sl. No. 6.1.9 E.Deptt Bihar S/R-51 | Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.23 watt CFL lamp. | Each | 248 |
| Sl. No. 6.1.10 E.Deptt Bihar S/R-51 | Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.26 watt CFL lamp. | Each | 248 |
| Sl. No. 6.1.11 E.Deptt Bihar S/R-51 | Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.45 watt CFL lamp. | Each | 478 |
| Sl. No. 6.1.12 E.Deptt Bihar S/R-51 | Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.9 watt PL-L lamp. | Each | 75 |
| Sl. No. 6.1.13 E.Deptt Bihar S/R-51 | Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.11 watt PL-L lamp. | Each | 85 |
| Sl. No. 6.1.14 E.Deptt Bihar S/R-51 | Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.13 watt PL-L lamp. | Each | 110 |
| Sl. No. 6.1.15 E.Deptt Bihar S/R-51 | Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.18 watt PL-L lamp. | Each | 118 |
| Sl. No. 6.1.16 E.Deptt Bihar S/R-51 | Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.36 watt PL-L lamp. | Each | 146 |
| Sl. No. 6.1.17 E.Deptt Bihar S/R-51 | Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.70 watt sodium lamp. | Each | 278 |
| Sl. No. 6.1.18 E.Deptt Bihar S/R-51 | Supplying and fixing of following type lamp in the existing electrical fitting/fixtures etc. as required.150 watt sodium lamp. | Each | 407 |
| Sl. No. 6.1.19 E.Deptt Bihar S/R-51 | Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 250 watt sodium lamp | Each | 419 |
| Sl. No. 6.1.20 E.Deptt Bihar S/R-51 | Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 400 watt sodium lamp | Each | 536 |
| Sl. No. 6.1.21 E.Deptt Bihar S/R-51 | Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 250 watt Metal Helide lamp (T) | Each | 559 |
| Sl. No. 6.1.22 E.Deptt Bihar S/R-51 | Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 500 watt Metal Halogenlamp | Each | 90 |
| Sl. No. 6.1.23 E.Deptt Bihar S/R-51 | Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 1000 watt Metal Halogenlamp | Each | 116 |
| Sl. No. 6.1.24 E.Deptt Bihar S/R-51 | Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 28 watt (T5) tube light. | Each | 134 |
| Sl. No. 6.1.25 E.Deptt Bihar S/R-51 | Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 35/36 watt CFL lamp | Each | 369 |
| Sl. No. 6.1.26 E.Deptt Bihar S/R-51 | Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 85 watt CFL lamp | Each | 797 |
| Sl. No. 6.1.27 E.Deptt Bihar S/R-51 | Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 400 watt Metal Halide lamp (T) | Each | 894 |
| Sl. No. 6.1.28 E.Deptt Bihar S/R-51 | Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 70 watt Metal Halide lamp (T) | Each | 671 |
| Sl. No. 6.1.29 E.Deptt Bihar S/R-51 | Supplying and fixing following type lamp in existing electrical fitting/fixtures etc. as required 150 watt Metal Halide lamp (T) | Each | 671 |
| Sl. No. 6.2.1 E.Deptt Bihar S/R-52 | Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required. 20/40 watt aluminium/polyster ballast. | Each | 185 |
| Sl. No. 6.2.2 E.Deptt Bihar S/R-52 | Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required. 20/40 watt copper ballast. | Each | 231 |
| Sl. No. 6.2.3 E.Deptt Bihar S/R-52 | Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required. 20/40 watt electronic ballast. | Each | 237 |
| Sl. No. 6.2.4 E.Deptt Bihar S/R-52 | Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required. 70 watt HPSV/MH ballast. | Each | 1191 |
| Sl. No. 6.2.5 E.Deptt Bihar S/R-52 | Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required. 150 watt HPSV/MH ballast. | Each | 1743 |
| Sl. No. 6.2.6 E.Deptt Bihar S/R-52 | Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required. 250 watt HPSV/MH ballast. | Each | 2045 |
| Sl. No. 6.2.7 E.Deptt Bihar S/R-52 | Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required. 400 watt HPSV/MH ballast. | Each | 2397 |
| Sl. No. 6.2.8 E.Deptt Bihar S/R-52 | Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required. 70 watt 5V/MH control gear box | Each | 1640 |
| Sl. No. 6.2.9 E.Deptt Bihar S/R-52 | Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required. 150 watt 5V/MH control gear box | Each | 2204 |
| Sl. No. 6.2.10 E.Deptt Bihar S/R-52 | Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required. 250 watt 5V/MH control gear box | Each | 3229 |
| Sl. No. 6.2.11 E.Deptt Bihar S/R-52 | Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required. 400 watt 5V/MH control gear box | Each | 4050 |
| Sl. No. 6.2.12 E.Deptt Bihar S/R-52 | Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required. 70 to 400 watt /gnitors | Each | 192 |
| Sl. No. 6.2.13 E.Deptt Bihar S/R-52 | Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required. 20/40 watt starters | Each | 14 |
| Sl. No. 6.2.14 E.Deptt Bihar S/R-52 | Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required. Tube Fitting holder | Each | 62 |
| Sl. No. 6.2.15 E.Deptt Bihar S/R-52 | Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required. 1 x 9/11/13 watt electronic ballast for PL (CFL) | Each | 202 |
| Sl. No. 6.2.16 E.Deptt Bihar S/R-52 | Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required. 1 x 18 watt electronic ballast for PL (CFL) | Each | 202 |
| Sl. No. 6.2.17 E.Deptt Bihar S/R-52 | Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required. 1 x 36 watt electronic ballast for PL (CFL) | Each | 319 |
| Sl. No. 6.2.18 E.Deptt Bihar S/R-52 | Supplying and fixing following types ballat/ choke in the existing electrical fittings/fixtures etc. as required. Electronic ballast for 28 watt (T5) | Each | 443 |
| Sl. No. 6.3.1 E.Deptt Bihar S/R-52 | Supplying and fixing of following capacity procelain fuse Link, rewireable type, 240/415 volts, ISI marked, including drilling holes in board, making connections etc. as required 16 amps. | Each | 152 |
| Sl. No. 6.3.2 E.Deptt Bihar S/R-52 | Supplying and fixing of following capacity procelain fuse Link, rewireable type, 240/415 volts, ISI marked, including drilling holes in board, making connections etc. as required 32 amps. | Each | 213 |
| Sl. No. 6.3.3 E.Deptt Bihar S/R-52 | Supplying and fixing of following capacity procelain fuse Link, rewireable type, 240/415 volts, ISI marked, including drilling holes in board, making connections etc. as required 63 amps. | Each | 374 |
| Sl. No. 6.3.4 E.Deptt Bihar S/R-52 | Supplying and fixing of following capacity procelain fuse Link, rewireable type, 240/415 volts, ISI marked, including drilling holes in board, making connections etc. as required 100 amps. | Each | 659 |
| Sl. No. 6.3.5 E.Deptt Bihar S/R-52 | Supplying and fixing of following capacity procelain fuse Link, rewireable type, 240/415 volts, ISI marked, including drilling holes in board, making connections etc. as required 200 amps. | Each | 1197 |
| Sl. No. 6.3.6 E.Deptt Bihar S/R-52 | Supplying and fixing of following capacity procelain fuse Link, rewireable type, 240/415 volts, ISI marked, including drilling holes in board, making connections etc. as required 300 amps. | Each | 1698 |
| Sl. No. 6.4.1 E.Deptt Bihar S/R-53 | Providing and fixing following way singe pole, porcelain rewireable type, 16 amps per way distribution board on surface/recess in suitable size PVC/ G.I.box with phenolic laminated sheet complete with porcelain fuse link, interconnections and earthing the body etc.as required. 2 way, DB | Each | 344 |
| Sl. No. 6.4.2 E.Deptt Bihar S/R-53 | Providing and fixing following way singe pole, porcelain rewireable type, 16 amps per way distribution board on surface/recess in suitable size PVC/ G.I.box with phenolic laminated sheet complete with porcelain fuse link, interconnections and earthing the body etc.as required. 4 way, DB | Each | 580 |
| Sl. No. 6.4.3 E.Deptt Bihar S/R-53 | Providing and fixing following way singe pole, porcelain rewireable type, 16 amps per way distribution board on surface/recess in suitable size PVC/ G.I.box with phenolic laminated sheet complete with porcelain fuse link, interconnections and earthing the body etc.as required. 6 way, DB | Each | 837 |
| Sl. No. 6.4.4 E.Deptt Bihar S/R-53 | Providing and fixing following way singe pole, porcelain rewireable type, 16 amps per way distribution board on surface/recess in suitable size PVC/ G.I.box with phenolic laminated sheet complete with porcelain fuse link, interconnections and earthing the body etc.as required. 8 way, DB | Each | 1015 |
| Sl. No. 6.4.5 E.Deptt Bihar S/R-53 | Providing and fixing following way singe pole, porcelain rewireable type, 16 amps per way distribution board on surface/recess in suitable size PVC/ G.I.box with phenolic laminated sheet complete with porcelain fuse link, interconnections and earthing the body etc.as required. 10 way, DB | Each | 1248 |
| Sl. No. 6.4.6 E.Deptt Bihar S/R-53 | Providing and fixing following way singe pole, porcelain rewireable type, 16 amps per way distribution board on surface/recess in suitable size PVC/ G.I.box with phenolic laminated sheet complete with porcelain fuse link, interconnections and earthing the body etc.as required. 12 way, DB | Each | 1426 |
| Sl. No. 6.14.3 E.Deptt Bihar S/R-09, P-6 Old SR | Supplying and laying following sizes and core PVC/XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts (Conforms to IS:1554, part-1) 16 sq.mm, 2 core | Metre | 173 |
| Sl. No. 6.14.6 E.Deptt Bihar S/R-09, P-6 Old SR | Supplying and laying following sizes and core PVC/XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts (Conforms to IS:1554, part-1) 35 sq.mm, 3.5 core | Metre | 350 |
| Sl. No. 6.15 E.Deptt Bihar S/R-09, P-7 Old SR | Providing and fixing PVC/G.I. box on surface or in recess with suitable size of phenolic laminated sheet cover in front including 3 nos. 6 amp 3/5 pin socket outlet, 3 nos. 6 amp piano type switch, 1 no. 15/16 amp S.S. combined, 1 no. 6/32 amp S.P. 'C' series MCB and interconnection with 2.5 sq.mm PVC insulated copper conductor, cable, earthing, painting etc. as required. (For used as computer terminal. | Each | 618 |
| Sl. No. 6.17.4 E.Deptt Bihar S/R-09, P-7 Part II Old SR | Supplying, fitting and fixing following sizes G.I. pipes with making holes in ground and grouting the pole with cement, sand and stone chips in ratio 1:2:4 including painting the pole etc as required 5.49 mtr (18 ft) 50 mm dia. | Each | 2041 |
| Sl. No. 6.18 E.Deptt Bihar S/R-09, P-7 Part II Old SR | Trench cutting in soil of suitable size 0.457 mtr (1.5 feet) wide and 0.609 mtr (2 feet) depth including refilling the trench with same etc as required. (For laying the cable) | Metre | 22 |
| Sl. No. 7.1.1 E..B.C Deptt Bihar S/R-53 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq.mm. | Metre | 144 |
| Sl. No. 7.1.2 E.Deptt Bihar S/R-53 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 35 sq.mm and upto 95 sq.mm. | Metre | 151 |
| Sl. No. 7.1.3 E.Deptt Bihar S/R-53 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 95 sq.mm and upto 185 sq.mm. | Metre | 157 |
| Sl. No. 7.1.3 E.Deptt Bihar S/R-09, P-10 Old SR | Supplying and fixing PVC insulated single core aluminium conductor cable alongwith 12 SWG.GI bearer wire including connection etc. as required 2 x 10sq.mm | Metre | 32 |
| Sl. No. 7.1.4 E.Deptt Bihar S/R-53 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 185 sq.mm and upto 400 sq.mm. | Metre | 178 |
| Sl. No. 7.1.4 E.Deptt Bihar S/R-09, P-10 Old SR | Supplying and fixing PVC insulated single core aluminium conductor cable alongwith 12 SWG.GI bearer wire including connection etc. as required (Note:-Normally used for service connection.) 4 x 16sq.mm | Metre | 37 |
| Sl. No. 7.1.5 E.Deptt Bihar S/R-09, P-10 Old SR | Supplying and fixing PVC insulated single core aluminium conductor cable alongwith 12 SWG.GI bearer wire including connection etc. as required (Note:-Normally used for service connection.) 4 x 10sq.mm | Metre | 59 |
| Sl. No. 7.2.1 E.Deptt Bihar S/R-53 | Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq.mm. | Metre | 108 |
| Sl. No. 7.2.2 E.Deptt Bihar S/R-53 | Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 35 sq.mm and upto 95 sq.mm. | Metre | 121 |
| Sl. No. 7.2.3 E.Deptt Bihar S/R-53 | Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 95 sq.mm and upto 185 sq.mm. | Metre | 126 |
| Sl. No. 7.2.4 E.Deptt Bihar S/R-53 | Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 185 sq.mm and upto 400 sq.mm. | Metre | 141 |
| Sl. No. 7.3.1 E.Deptt Bihar S/R-53 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, and refilling the trench etc. as required but excluding sand cushioning and protective covering. Upto 35 sq.mm. | Metre | 51 |
| Sl. No. 7.3.2 E.Deptt Bihar S/R-53 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, and refilling the trench etc. as required but excluding sand cushioning and protective covering. Above 35 sq.mm and upto 95 sq.mm. | Metre | 56 |
| Sl. No. 7.3.3 E.Deptt Bihar S/R-54 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, and refilling the trench etc. as required but excluding sand cushioning and protective covering. Above 95 sq.mm and upto 185 sq.mm. | Metre | 61 |
| Sl. No. 7.3.4 E.Deptt Bihar S/R-54 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, and refilling the trench etc. as required but excluding sand cushioning and protective covering. Above 185 sq.mm and upto 400 sq.mm. | Metre | 75 |
| Sl. No. 7.4.1 E.Deptt Bihar S/R-54 | Fixing for laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq.mm. (Clamped with 1 mm thick saddle). | Metre | 21 |
| Sl. No. 7.4.2 E.Deptt Bihar S/R-54 | Fixing for laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Abode 35 sq.mm. amd upto 95 sq.mm.(Clamped with 25 x 3 mm MS flat clamp). | Metre | 55 |
| Sl. No. 7.4.3 E.Deptt Bihar S/R-54 | Fixing for laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Abode 95 sq.mm. and upto 185 sq.mm.(Clamped with 25 x 40 x 3 mm MS flat clamp). | Metre | 64 |
| Sl. No. 7.4.4 E.Deptt Bihar S/R-54 | Fixing for laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Abode 185 sq.mm. and upto 400 sq.mm.(Clamped with 40 x 3 mm MS flat clamp). | Metre | 88 |
| Sl. No. 7.5.1 E.Deptt Bihar S/R-54 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 120 sq.mm. | Metre | 191 |
| Sl. No. 7.5.2 E.Deptt Bihar S/R-54 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 120 sq.mm and upto 400 sq.mm. | Metre | 206 |
| Sl. No. 8.1.1 E.Deptt Bihar S/R-54 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 4.5 metre and upto 6.5 metre | Each | 2168 |
| Sl. No. 8.1.2 E.Deptt Bihar S/R-54 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 6.5 metre and upto 8 metre | Each | 2581 |
| Sl. No. 8.1.3 E.Deptt Bihar S/R-54 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 8 metre and upto 10.0 metre | Each | 3072 |
| Sl. No. 8.1.4 E.Deptt Bihar S/R-54 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 10 metre and upto 12 metre | Each | 3585 |
| Sl. No. 8.2 E.Deptt Bihar S/R-54 | Erection of steel tubular or rail pole strut in cement concrete 1:3:6(1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size) and refilling and secured with holding clamps, bolts, nuts etc. as required. | Each | 3877 |
| Sl. No. 8.3 E.Deptt Bihar S/R-55 | Providing and making steel collar with cement concrete 1:3:6 (1 cement :3 coasrse sand : 6 stone aggregate 20 mm) of specified size and shape including form work, plastering if required, curing etc. as required (volume of pole/pipe not to be dedected) | Each | 6132 |
| Sl. No. 8.4.1 E.Deptt Bihar S/R-55 | Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 32 mm dia | Metre | 253 |
| Sl. No. 8.4.2 E.Deptt Bihar S/R-55 | Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 40 mm dia | Metre | 270 |
| Sl. No. 8.5 E.Deptt Bihar S/R-55 | Supplying and fixing of 32 mm dia x 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV/ HPSV/ CFL street light fitting on pole including bending the pipe to the required shape, 2 nos. 40 mm x 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. | Each | 809 |
| Sl. No. 8.6 E.Deptt Bihar S/R-55 | Supplying and fixing of light class G.I. pipe of 50 mm dia (nominal) 3 metres length along the pole for protection of under ground cable as required. | Each | 982 |
| Sl. No. 8.7 E.Deptt Bihar S/R-55 | Supplying and fixing of light class G.I. pipe of 80 mm dia (nominal) 3 metres length along the pole for protection of under ground cable as required. | Each | 1334 |
| Sl. No. 8.8 E.Deptt Bihar S/R-55 | Supplying and fixing of light class G.I. pipe of 100 mm dia (nominal) 3 metres length along the pole for protection of under ground cable as required. | Each | 2802 |
| Sl. No. 8.9.1 E.Deptt Bihar S/R-55 | Supplying and fixing pole mounted junction box/fuse box for single phase/ 2 core low wattage street light pole with all accessories and connection etc. as required. | Each | 638 |
| Sl. No. 8.9.2 E.Deptt Bihar S/R-55 | Supplying and fixing pole mounted junction box/fuse box for three phase/ 4 core high wattage HPSV/ HPMV/ MH street light pole with all accessories and connection etc. as required. | Each | 755 |
| Sl. No. 8.10.1 E.Deptt Bihar S/R-55 | Supplying and fixing wall/floor mounted cubical panel board, fabricated with 18 gauge iron sheet, suitable for panel mounted switch disconnector, including bus-bar chamber, insulator and painting etc. as required.(but without busbar copper strip) | Sft | 1314 |
| Sl. No. 8.10.2 E.Deptt Bihar S/R-55 | Supplying and fixing wall/floor mounted cubical panel board, fabricated with 16 gauge iron sheet, suitable for panel mounted switch disconnector, including bus-bar chamber, insulator and painting etc. as required.(but without busbar copper strip) | Sft | 1382 |
| Sl. No. 8.10.3 E.Deptt Bihar S/R-56 | Supply and fixing digital voltmeter, single phase in the existing cubical panel board including drilling holes in the pannel board, making connection etc. as required. | Each | 1202 |
| Sl. No. 8.10.4 E.Deptt Bihar S/R-56 | Supply and fixing digital voltmeter, three phase in the existing cubical panel board including drilling holes in the pannel board, making connection etc. as required. | Each | 1337 |
| Sl. No. 8.10.5 E.Deptt Bihar S/R-56 | Supply and fixing digital Ammeter, single phase with C.T. coil in the existing cubical panel board including drilling holes in the panel board, making connection etcas required. | Each | 1154 |
| Sl. No. 8.10.6 E.Deptt Bihar S/R-56 | Supply and fixing digital Ammeter, three phase with C.T. coil in the existing cubical panel board including drilling holes in the panel board, making connection etc as required. | Each | 1643 |
| Sl. No. 8.11.1 E.Deptt Bihar S/R-56 | Supplying and fixing extra down rod for ceiling fan of 1 metre length G.I. pipe, 15 mm dia, heavy guage including painting etc. as required. | Each | 305 |
| Sl. No. 8.11.2 E.Deptt Bihar S/R-56 | Supplying and installation of regulator/ standard model A.C. ceiling fan of 1200 mm sweep including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm. FR PVC insulated copper conductor etc. as required. | Each | 1618 |
| Sl. No. 8.11.3 E.Deptt Bihar S/R-56 | Supplying and installation of regulator/ standard model A.C. ceiling fan of 1400 mm sweep including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm. FR PVC insulated copper conductor etc. as required. | Each | 1758 |
| Sl. No. 8.11.4 E.Deptt Bihar S/R-56 | Supplying and installation of 300 mm, 230 V A.C.exhaust fan in the existing opening including making good the damage, connection testing, commissioning etc. as required. | Each | 1483 |
| Sl. No. 8.11.5 E.Deptt Bihar S/R-56 | Supplying and installation of 375 mm, 230 V A.C. fan in the existing opening including making good the damage, connection testing, commissioning etc. as required. | Each | 3543 |
| Sl. No. 8.11.6 E.Deptt Bihar S/R-57 | Supplying and installation of 450 mm, 230 V A.C. exhaust fan in the existing opening including making good the damage, connection testing, commissioning etc. as required. | Each | 4413 |
| Sl. No. 8.11.7 E.Deptt Bihar S/R-57 | Supplying and installation of 400 mm, 230 V A.C. wall/cabin fan including fixing the bracket, making, connection, testing, commissioning etc. as required. | Each | 2427 |
| Sl. No. 8.12.1 E.Deptt Bihar S/R-18 57 | Supply and erection of 4 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, make of 3 mm thick sheet alongwith base plate of size 220 x 220 x 12 mm, small door opening for junction box mounting and suitable size foundation bolts with template and all complete as required (but without pole collar) Single arm, 1500 mm. | Each | 15420 |
| Sl. No. 8.12.2 E.Deptt Bihar S/R-57 | Supply and erection of 4 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, make of 3 mm thick sheet alongwith base plate of size 220 x 220 x 12 mm, small door opening for junction box mounting and suitable size foundation bolts with template and all complete as required (but without pole collar) Double arm, 1500 mm. | Each | 16895 |
| Sl. No. 8.13.1 E.Deptt Bihar S/R-57 | Supply and erection of 6 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, make of 3 mm thick sheet alongwith base plate of size 220 x 220 x 12 mm, small door opening for junction box mounting and suitable size foundation bolts with template and all complete as required (but without pole collar) Single arm, 1500 mm | Each | 20535 |
| Sl. No. 8.13.2 E.Deptt Bihar S/R-57 | Supply and erection of 6 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, make of 3 mm thick sheet alongwith base plate of size 220 x 220 x 12 mm, small door opening for junction box mounting and suitable size foundation bolts with template and all complete as required (but without pole collar) Double arm, 1500 mm | Each | 22009 |
| Sl. No. 8.14.1 E.B.C. Deptt Bihar S/R-57 | Supply and erection of 7 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 155 mm, make of 3 mm thick sheet alongwith base plate of size 260 x 260 x 16 mm, small door opening for junction box mounting and suitable size foundation bolts with template and all complete as required (but without pole collar) Single arm, 1500 mm | Each | 21505 |
| Sl. No. 8.14.2 E.B.C. Deptt Bihar S/R-57 | Supply and erection of 7 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 155 mm, make of 3 mm thick sheet alongwith base plate of size 260 x 260 x 16 mm, small door opening for junction box mounting and suitable size foundation bolts with template and all complete as required (but without pole collar) Double arm, 1500 mm | Each | 26231 |
| Sl. No. 8.15.1 E.Deptt Bihar S/R-58 | Supply and erection of 8 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 155 mm, make of 3 mm thick sheet alongwith base plate of size 260 x 260 x 16 mm, small door opening for junction box mounting and suitable size foundation bolts with template and all complete as required (but without pole collar) Single arm, 1500 mm | Each | 27912 |
| Sl. No. 8.15.2 E.Deptt Bihar S/R-58 | Supply and erection of 8 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 155 mm, make of 3 mm thick sheet alongwith base plate of size 260 x 260 x 16 mm, small door opening for junction box mounting and suitable size foundation bolts with template and all complete as required (but without pole collar) Double arm, 1500 mm | Each | 29448 |
| Sl. No. 9.1 E.Deptt Bihar S/R-58 | Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within alead of 50 metres. | Cum | 153 |
| Sl. No. 9.2 E.Deptt Bihar S/R-18, 58 | Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within alead of 50 metres. | Cum | 155 |
| Sl. No. 9.3 E.Deptt Bihar S/R-58 | Filling available excavated earth (excluding rock) in trenches, sides of foundations etc. in layers not exceeding 20 cm in depth, condolidating each | Cum | 69 |
| Sl. No. 9.4 E.Deptt Bihar S/R-58 | Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing the sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc. in layers of 20 cm, ramming, watering and disposal of excavated soil as directed, with a lead of 50 metres. | Cum | 178 |
| Sl. No. 9.5 E.Deptt Bihar S/R-58 | Duduct for not consolidation by ramming and watering while refilling with sand and or good soil in cable/ pipe laying. | Cum | 40 |
| Sl. No. 9.6 E.Deptt Bihar S/R-58 | Excavation for cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres. | Cum | 46 |
| Sl. No. 9.7 E.Deptt Bihar S/R-58 | Providing and laying in position cement concrete 1:2:4 (1 cement :2 coasrse sand : 4 stone aggregate 20 mm) in foundation of pump, DG set etc. including form work etc. as required. | Cum | 6678 |
| Sl. No. 9.8 E.Deptt Bihar S/R-59 | Providing and laying in position cement concrete 1:3:6 (1 cement :3 coasrse sand : 6 stone aggregate 20 mm) in foundation of pump, DG set etc. including form work etc. as required. | Cum | 6132 |
| Sl. No. 9.9 E.Deptt Bihar S/R-59 | Providing and laying in position cement concrete 1:3:6 (1 cement :3 coasrse sand : 6 stone aggregate 40 mm) in foundation of pump, DG set etc. including form work etc. as required. | Cum | 5864 |
| Sl. No. 9.10 E.Deptt Bihar S/R-59 | Providing and laying in position reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graged stone aggregate 20 mm nominal size) in foundation of pump, DG et etc including form work etc. as required.(excluding reinforcement) | Cum | 6835 |
| Sl. No. 9.11 E.Deptt Bihar S/R-59 | Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels. | Cum | 5106 |
| Sl. No. 9.12 E.Deptt Bihar S/R-59 | Providing cement plaster of mix 1:4 (1 cement :4 fine sand) at all levels. | Sq. mtr | 134 |
| Sl. No. 9.13.1 E.B.C. Deptt Bihar S/R-59 | Providing, laying and fixing of following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required 50 mm dia | Metre | 509 |
| Sl. No. 9.13.2 E.Deptt Bihar S/R-59 | Providing, laying and fixing of following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required 80 mm dia | Metre | 439 |
| Sl. No. 9.13.3 E.Deptt Bihar S/R-59 | Providing, laying and fixing of following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required 100 mm dia | Metre | 948 |
| Sl. No. 9.13.4 E.Deptt Bihar S/R-18- 59 | Providing, laying and fixing of following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required 150 mm dia | Metre | 1416 |
| Sl. No. 9.14.1 E.Deptt Bihar S/R-59 | Providing, laying and fixing following dia R.C.C. pipe NP2 class (light duty) in grond complete with RCC collars, jointing with cement mortar 1:2 (1 cement :2 fine sand) including trenching (75 cm deep) and refilling etc. as required 100 mm dua | Each | 308 |
| Sl. No. 9.14.2 E.Deptt Bihar S/R-59 | Providing, laying and fixing following dia R.C.C. pipe NP2 class (light duty) in grond complete with RCC collars, jointing with cement mortar 1:2 (1 cement :2 fine sand) including trenching (75 cm deep) and refilling etc. as required 150 mm dua | Each | 348 |
| Sl. No. 9.14.3 E.Deptt Bihar S/R-59 | Providing, laying and fixing following dia R.C.C. pipe NP2 class (light duty) in grond complete with RCC collars, jointing with cement mortar 1:2 (1 cement :2 fine sand) including trenching (75 cm deep) and refilling etc. as required 250 mm dua | Each | 423 |
| Sl. No. 9.14.4 E.Deptt Bihar S/R-59 | Providing, laying and fixing following dia R.C.C. pipe NP2 class (light duty) in grond complete with RCC collars, jointing with cement mortar 1:2 (1 cement :2 fine sand) including trenching (75 cm deep) and refilling etc. as required 300 mm dua | Each | 518 |