RRB Junior Engineer CBT 2 Civil Engineering Paper – 28 Aug 2019 Afternoon Shift
RRB Junior Engineer CBT 2 Civil Engineering Exam Paper – 2019 “held on 28 Aug 2019” Afternoon Shift
Exam Date
: 28-08-2019
Exam Time
: 15:00 – 17:00
Question No. 1
ट्रस्ड ब्रिज में स्पैन की अधिकतम सीमा ________ होती है।
A)
18 से 30 मीटर
B)
30 से 80 मीटर
C)
50 से 150 मीटर
D)
3 से 7.5 मीटर
In a trussed bridge, the maximum limit of span is –
A)
18 to 30 m
B)
30 to 80 m
C)
50 to 150 m
D)
3 to 7.5 m
Answer Key : B
Question No. 2
राकेश शर्मा ने किस देश के अंतरिक्ष यान से अंतरिक्ष यात्रा की थी?
A)
जापान
B)
UK
C)
जर्मनी
D)
सोवियत संघ
In which country’s spacecraft did Rakesh Sharma travel into space?
A)
Japan
B)
UK
C)
Germany
D)
Soviet Union
Answer Key : D
Question No. 3
बंगाल का विभाजन किस वर्ष से प्रभावी हुआ था?
A)
1902
B)
1904
C)
1905
D)
1903
When did the partition of Bengal come into effect?
A)
1902
B)
1904
C)
1905
D)
1903
Answer Key : C
For(Question No. 3)
Question No. 4
निम्न में से कौन सा प्रोटोकॉल, हायर लेवल प्रोटोकॉल एड्रेस (higher level protocol address) को फिजिकल नेटवर्क एड्रेस (physical network address) में परिवर्तित करने के लिए उत्तरदायी है?
A)
बूटस्ट्रैप प्रोटोकॉल (BOOTP)
B)
एड्रेस रिज्योल्युसन प्रोटोकॉल (ARP)
C)
रिवर्स एड्रेस रिज्योल्युसन प्रोटोकॉल (RARP)
D)
इंटरनेट कंट्रोल मेसेज प्रोटोकॉल (ICMP)
Which of the following protocols is responsible for converting higher level protocol addresses to physical network addresses?
A)
Bootstrap Protocol (BOOTP)
B)
Address Resolution Protocol (ARP)
C)
Reverse Address Resolution Protocol (RARP)
D)
Internet Control Message Protocol (ICMP)
Answer Key : B
For(Question No. 4)
Question No. 5
बंकन के अधीन हिस्से (member) को क्या कहा जाता है?
A)
बीम
B)
स्तंभ (Column)
C)
फुटिंग (Footing)
D)
स्लैब
The member which is subjected to bending is called-
A)
Beam
B)
Column
C)
Footing
D)
Slab
Answer Key : A
For(Question No. 5)
Question No. 6
______ और पानी, वायु की उपस्थिति में अभिक्रिया करके कार्बोनिक अम्ल बनाते हैं।
A)
कार्बन
B)
कार्बन डाईऑक्साइड
C)
विकल्पों में से सभी
D)
कार्बन मोनोऑक्साइड
______ and water in the air react together to form carbonic acid.
A)
Carbon
B)
Carbon dioxide
C)
All of the options
D)
Carbon monoxide
Answer Key : B
For(Question No. 6)
Question No. 7
ग्राउटिंग से पहले कंक्रीट का कंपन, कंक्रीट की गुणवत्ता को ______ बनाता है।
A)
निम्न
B)
धीमा
C)
बेहतर
D)
पर्याप्त
The vibrating of the concrete before grouting makes the quality of concrete –
A)
Low
B)
Slow
C)
Better
D)
Fair
Answer Key : C
For(Question No. 7)
Question No. 8
संरचनात्मक विश्लेषण में प्रयुक्त आघूर्ण वितरण विधि (moment distribution method) को ________ का सदृश माना जा सकता है।
A)
विस्थापन विधि (Displacement method)
B)
इकाई विधि (Unit method)
C)
बल विधि (Force method)
D)
नम्यता विधि (Flexibility method)
The moment distribution method in structural analysis is also called as-
A)
Displacement method
B)
Unit method
C)
Force method
D)
Flexibility method
Answer Key : A
For(Question No. 8)
Question No. 9
ड्राइंग इंस्ट्रूमेंट्स एवं सहायक उपकरणों (aids) का नाम बताएं।
A)
ड्राइंग शीट
B)
टेम्पलेट्स
C)
गुनिया (सेट स्क्वायर)
D)
विकल्पों में से सभी
Name the drawing instruments and aids.
A)
Drawing sheet
B)
Templates
C)
Set squares
D)
All of the options
Answer Key : D
For(Question No. 9)
Question No. 10
वित्तीय विश्लेषण इनमें से क्या निर्धारित करने में मदद करता है?
A)
फर्म की परिचालन दक्षता और फर्म की वित्तीय स्थिति दोनों
B)
फर्म की परिचालन दक्षता
C)
फर्म की वित्तीय स्थिति
D)
न तो फर्म की परिचालन दक्षता और न ही फर्म की वित्तीय स्थिति
The financial analysis helps to judge:
A)
Both the operational efficiency of the firm and the financial position of the firm
B)
The operational efficiency of the firm
C)
The financial position of the firm
D)
Neither operational efficiency of the firm nor financial position of the firm
Answer Key : A
For(Question No. 10)
Question No. 11
विशेष प्रकार के चमकीले टाइल्स (Glazed tiles) या ईंटों का उपयोग __________ में फेसिंग मटेरियल (Facing material) के रूप में मलबे या कंक्रीट या ब्रिक बैकिंग के लिए किया जाता है।
A)
रैंडम रब्बल मेसनरी
B)
ब्रिक बैक्ड अश्लर मेसनरी
C)
ईंट, मलबे या कंक्रीट बैकिंग चिनाई के साथ स्टोन फेसिंग
D)
मलबे या कंक्रीट बैकिंग चिनाई के साथ ब्रिक फेसिंग
Special types of glazed tiles or bricks are used as facing material for the rubble or concrete or brick backing in-
A)
Random Rubble masonry
B)
Brick backed Ashlar masonry
C)
Stone facing with Brick, Rubble or Concrete backing masonry
D)
Brick facing with Rubble or Concrete backing masonry
Answer Key : D
For(Question No. 11)
Question No. 12
एक स्थिर बजरी-सीमेंट (aggregate cement) अनुपात के लिए, यदि सकल बजरी-सीमेंट सीमेंट अनुपात को स्थिर बनाए रखते हुए रेत के स्थान पर मोटी बजरी मिलाई जाती है, तो बजरी के कुल पृष्ठीय क्षेत्रफल पर क्या प्रभाव होगा?
A)
घट जाएगा
B)
अन्य कारकों पर निर्भर करता है
C)
अपरिवर्तित रहेगा
D)
बढ़ जाएगा
For a constant aggregate cement ratio, if the coarse aggregate is increased at the expense of sand, maintaining total aggregate cement ratio constant, then the total surface area of the aggregate is –
A)
Reduced
B)
Depends on Other factor
C)
Remains Unchanged
D)
Increased
Answer Key : A
For(Question No. 12)
Question No. 13
मिट्टी में मौजूद वह जल, जो हाइग्रोस्कोपिक और केशिकीय जल से अतिरिक्तता में मौजूद है और जो मिट्टी में रंध्र और निकास मौजूद होने पर मुक्त रूप से नीचे की ओर जा सकता है, उसे क्या कहा जाता है?
A)
मुक्त जल
B)
केशिकीय जल
C)
फायरिंग वाटर
D)
हाइग्रोस्कोपिक जल
The water in the soil which is in excess of the hygroscopic and capillary water and which can move freely downwards when the soil is porous and drainage available is called-
A)
Free water
B)
Capillary water
C)
Firing water
D)
Hygrosopic water
Answer Key : A
For(Question No. 13)
Question No. 14
धावन सोडा का सही सूत्र क्या है?
A)
Na2CO3.6H2O
B)
Na2CO3
C)
Na2CO3.10H2O
D)
Na2CO3.H2O
What is the correct formula of washing soda?
A)
Na2CO3.6H2O
B)
Na2CO3
C)
Na2CO3.10H2O
D)
Na2CO3.H2O
Answer Key : C
For(Question No. 14)
Question No. 15
इनमें से कौन सा 1987 में ओजोन परत की सुरक्षा हेतु अंतर्राष्ट्रीय प्रोटोकॉल है?
A)
कार्टाजेना प्रोटोकॉल
B)
मॉन्ट्रियल प्रोटोकॉल
C)
क्योटो प्रोटोकोल
D)
वियना प्रोटोकॉल
The international protocol to protect the ozone layer in 1987 was-
A)
Cartagena protocol
B)
Montreal Protocol
C)
Kyoto protocol
D)
Vienna Convention
Answer Key : B
For(Question No. 15)
Question No. 16
ट्रसों (trusses) के शीर्षों को मिलाने वाली रेखा, ______ कहलाती है।
A)
पीक लाइन
B)
स्काई लाइन
C)
टॉप लाइन
D)
रिज लाइन
A line joining the vertices of the trusses is called-
A)
Peak line
B)
Sky line
C)
Top line
D)
Ridge line
Answer Key : D
For(Question No. 16)
Question No. 17
निम्नलिखित में से कौन सा एंटी-वायरस सॉफ़्टवेयर नहीं है?
A)
नॉर्टन
B)
कस्पेरस्की
C)
ओरेकल
D)
McAfee
Which of the following is NOT an anti-virus software?
A)
Norton
B)
Kaspersky
C)
Oracle
D)
McAfee
Answer Key : C
For(Question No. 17)
Question No. 18
इनमें से कौन सी पानी की स्थायी कठोरता को दूर करने की प्रक्रिया है?
A)
जिओलाइट प्रक्रिया
B)
चूना उपचार
C)
निस्पंदन प्रक्रिया
D)
पानी का उबलना
Which of the following is the process of removal of permanent hardness of water?
A)
Zeolite process
B)
Lime treatment
C)
Filtration process
D)
Boiling of water
Answer Key : A
For(Question No. 18)
Question No. 19
निम्नलिखित में से किसने भारत के 23वें मुख्य चुनाव आयुक्त के रूप में प्रभार ग्रहण किया?
A)
सुनील अरोड़ा
B)
नसीम ज़ैदी
C)
अचल कुमार ज्योति
D)
ओम प्रकाश रावत
Who among the following assumed charge as the 23rd Chief Election Commissioner of India?
A)
Sunil Arora
B)
Nasim Zaidi
C)
Achal Kumar Jyoti
D)
Om Prakash Rawat
Answer Key : A
For(Question No. 19)
Question No. 20
__________ स्टेटमेंट का उपयोग लूप में स्टेटमेंट ब्लॉक के अंत में कंट्रोल ट्रांसफर करने के लिए किया जाता है।
A)
ब्रेक (Break)
B)
गोटू (Goto)
C)
स्विच (Switch)
D)
कंटिन्यू (Continue)
The _________ statement is used to transfer the control to the end of statement block in a loop.
A)
Break
B)
Goto
C)
Switch
D)
Continue
Answer Key : A
For(Question No. 20)
Question No. 21
निम्नलिखित कथनों पर विचार करें और सही विकल्प का चयन करें। : एक सतत बीम के मध्यवर्ती सहारे (support) के डूबने से (i) सहारे (support) पर लगने वाला ऋणात्मक आघूर्ण कम हो जाता है। (ii) सहारे पर लगने वाला ऋणात्मक आघूर्ण बढ़ जाता है। (iii) सहारे पर लगने वाला धनात्मक आघूर्ण कम हो जाता है। (iv) स्पैन के केंद्र में लगने वाला धनात्मक आघूर्ण बढ़ जाता है।
A)
i और iv सही हैं।
B)
ii और iii सही हैं।
C)
ii और iv सही हैं।
D)
i और iii सही हैं।
Consider the following statements: Sinking of an intermediate support of a continuous beam (i) reduces the negative moment at support. (ii) increases the negative moment at support. (iii) reduces the positive moment at support. (iv) increases the positive moment at the center of span.Of these statements:
A)
(i) and (iv) are correct
B)
(ii) and (iii) are correct
C)
(ii) and (iv) are correct
D)
(i) and (iii) are correct
Answer Key : A
For(Question No. 21)
Question No. 22
राजमार्ग निर्माण इंजीनियरिंग में, HMA नामक यंत्र का पूरा नाम क्या है?
A)
हॉट मिक्स ऐस्फॉल्ट प्लांट
B)
हॉट मिक्स एग्रीगेट प्लांट
C)
हॉट मिक्स एडमिक्सचर
D)
हार्ड मिक्स ऐस्फॉल्ट प्लांट
In Highway Construction engineering, the equipment HMA means –
A)
Hot Mix Asphalt Plant
B)
Hot Mix Aggregate Plant
C)
Hot Mix Admixture
D)
Hard Mix Asphalt Plant
Answer Key : A
For(Question No. 22)
Question No. 23
विश्व जल दिवस कब मनाया जाता है?
A)
24 मार्च
B)
20 मार्च
C)
22 मार्च
D)
26 मार्च
World water day is observed on –
A)
March 24
B)
March 20
C)
March 22
D)
March 26
Answer Key : C
For(Question No. 23)
Question No. 24
द्रव अवस्था में परिवर्तित हुए बिना ठोस अवस्था से सीधे गैस अवस्था में होने वाले परिवर्तन को _____ कहा जाता है।
A)
वाष्पीकरण
B)
उर्ध्वपातन
C)
संलयन (Fusion)
D)
संघनन
A change in state directly from solid to gas without changing into liquid state is called _____.
A)
Vapourisation
B)
Sublimation
C)
Fusion
D)
Condensation
Answer Key : B
For(Question No. 24)
Question No. 25
फाउंडेशन प्लान में _______ को प्रदर्शित किया जाएगा।
A)
कारपेट एरिया
B)
प्लिंथ लेवल की लंबाई
C)
नींव का आकार एवं गहराई
D)
नींव की ऊँचाई
Foundation plan will show –
A)
Carpet area
B)
Length of plinth level
C)
Size and depth of foundation
D)
Height of foundation
Answer Key : C
For(Question No. 25)
Question No. 26
निम्नलिखित में से किसका उपयोग वेब पेज लिखने के लिए किया जाता है?
A)
FTP
B)
HTTP
C)
URL
D)
HTML
Which of the following is used to write web pages?
A)
FTP
B)
HTTP
C)
URL
D)
HTML
Answer Key : D
For(Question No. 26)
Question No. 27
सतत बीम का विश्लेषण _______ द्वारा किया जा सकता है।
A)
त्रि-आघूर्ण प्रमेय
B)
विकल्पों में से सभी
C)
ढलान विक्षेपण विधि
D)
आघूर्ण वितरण विधि
Analysis of continuous beam can be done by-
A)
Three Moment Theorem
B)
All of the options
C)
Slope Deflection Method
D)
Moment Distribution Method
Answer Key : B
For(Question No. 27)
Question No. 28
RMC संयंत्रों में सीमेंट और फ्लाई एश और अन्य सीमेंट युक्त सामाग्रियों को संग्रहीत करने के लिए प्रयुक्त बड़े आकार के स्टील निर्मित बेलनाकार कंटेनरों को क्या कहा जाता है?
A)
मिक्सर
B)
स्क्रू कन्वेयर
C)
साइलो
D)
स्क्रेपर
The large steel cylindrical metal containers used in RMC plants used for storing cement and/or fly ash and such cementitious materials are named as –
A)
Mixer
B)
Screw Conveyor
C)
Silo
D)
Scraper
Answer Key : C
For(Question No. 28)
Question No. 29
पेंटिंग की सतह को ______ में मापा जाता है।
A)
टन
B)
वर्ग मीटर
C)
घन मीटर
D)
घन फीट
The surface of painting is measured in –
A)
Tonnes
B)
Sq.m
C)
Cu.m
D)
Cu.ft
Answer Key : B
For(Question No. 29)
Question No. 30
मिनी ड्राफ्टर _______ के कार्यों को जोड़ता है।
A)
विकल्पों में से सभी
B)
फ्रेंचकर्व और प्रोसर्किल
C)
T-स्क्वायर और सेट स्क्वायर्स
D)
डिवाइडर और कंपास
Mini drafter combines the functions of-
A)
All of the options
B)
FrenchCurve and Procircle
C)
T-square and Set squares
D)
Divider and Compass
Answer Key : A
For(Question No. 30)
Question No. 31
____ और ____ अंकों का उपयोग बाइनरी संख्या प्रणाली में होता है।
A)
3, 4
B)
0, 1
C)
1, 2
D)
0, 9
The digits used in a binary number system are ____ and ____.
A)
3, 4
B)
0, 1
C)
1, 2
D)
0, 9
Answer Key : B
For(Question No. 31)
Question No. 32
फील्ड रनवे की लंबाई (field runway length) हेतु ICAO विनिर्देश के अनुसार, टेक ऑफ रन (take off run) को ______ के रूप में जाना जाता है।
A)
LDA
B)
TODA
C)
TORA
D)
ASDA
According to the ICAO specification for field runway length, take off run available is known as-
A)
LDA
B)
TODA
C)
TORA
D)
ASDA
Answer Key : C
For(Question No. 32)
Question No. 33
इनमें से किस क्षेत्र को कारपेट एरिया में शामिल नहीं किया जाता है?
A)
प्रवेश द्वार को
B)
बरामदे, गलियारे और रास्ते को
C)
विकल्पों में से सभी
D)
दरवाजे और अन्य खुले स्थानों के साथ-साथ दीवारों को
Which of the following areas is/are NOT included in the Carpet area?
A)
Entrance gate
B)
Verandah, corridor and passage
C)
All of the options
D)
The walls along with doors and other openings
Answer Key : C
For(Question No. 33)
Question No. 34
______ के कारण विद्युत आवेश एक-दूसरे को आकर्षित और प्रतिकर्षित करते हैं।
A)
वायुगतिक बल (Aerodynamic force)
B)
स्थिरवैद्युत बल
C)
नाभिकीय बल
D)
गुरुत्वीय बल
The electric charges attract and repel each other due to-
A)
Aerodynamic force
B)
Electrostatic force
C)
Nuclear force
D)
Gravitational force
Answer Key : B
For(Question No. 34)
Question No. 35
ओजोन परत __________ को अवशोषित करती है, जो जीवों के लिए बहुत हानिकारक हैं।
A)
अवरक्त किरणों
B)
X-किरणों
C)
पराबैंगनी किरणों
D)
गामा किरणों
Ozone layer absorbs __________ which are very harmful for the living organisms.
A)
Infrared rays
B)
X rays
C)
Ultraviolet rays
D)
Gamma rays
Answer Key : C
For(Question No. 35)
Question No. 36
एकीकृत बाल विकास सेवाओं (ICDS) के क्या उद्देश्य हैं?
A)
टीकाकरण
B)
स्वास्थ्य जांच एवं रेफरल सेवाएं
C)
प्री-स्कूल नॉन -फॉर्मल एजुकेशन
D)
विकल्पों में से सभी
The objectives of the Integrated Child Development Services (ICDS) are-
A)
Immunization
B)
Health check up and referral services
C)
Pre-school non-formal education
D)
All of the options
Answer Key : D
For(Question No. 36)
Question No. 37
यदि बादल का तापमान ________ हो, तो बर्फ बनती है।
A)
हिमांक के बराबर
B)
हिमांक पर
C)
हिमांक से कम
D)
हिमांक के ठीक ऊपर
Formation of snow occurs if the cloud temperature is:
A)
Equal to the freezing point
B)
At the freezing point
C)
Below the freezing point
D)
Just above the freezing point
Answer Key : C
For(Question No. 37)
Question No. 38
संपीड्यता(Compressibility) ________ का व्युत्क्रम है।
A)
यंग प्रत्यास्थता मापांक (Young’s modulus of elasticity)
B)
प्रत्यास्थता के दृढ़ता मापांक (Rigidity Modulus of elasticity)
C)
प्रत्यास्थता के अपरूपण मापांक (Shear modulus of elasticity)
D)
प्रत्यास्थता के आयतन मापांक (Bulk modulus of elasticity)
Compressibility is the reciprocal of –
A)
Young’s modulus of elasticity
B)
Rigidity Modulus of elasticity
C)
Shear modulus of elasticity
D)
Bulk modulus of elasticity
Answer Key : D
For(Question No. 38)
Question No. 39
“इंदिरा गांधी स्वर्ण कप” निम्नलिखित में से किस खेल के लिए प्रदान किया जाता है?
A)
महिला हॉकी
B)
महिला बैडमिंटन
C)
महिला क्रिकेट
D)
महिला फुटबॉल
For which of the following games is the “Indira Gandhi Gold Cup” awarded?
A)
Women’s hockey
B)
Women’s badminton
C)
Women’s cricket
D)
Women’s football
Answer Key : A
For(Question No. 39)
Question No. 40
दोनों स्थिर सिरों वाले एक लंबे स्तंभ के लिए क्रांतिक भार 160 kN है। यदि समान खंड को इससे दोगुनी लंबाई के किसी अन्य स्तंभ के लिए प्रयोग किया जाना है, तो क्रांतिक भार कितना होगा?
A)
160 kN
B)
320 kN
C)
40 kN
D)
80 kN
The critical load for a long column with both ends fixed is 160 kN. If the same section is to be used for another column of double the length, the critical load is:
A)
160 kN
B)
320 kN
C)
40 kN
D)
80 kN
Answer Key : C
For(Question No. 40)
Question No. 41
2019 में, RBI ने SRPHi का शुभारंभ किया, इसका पूर्ण रूप क्या है?
A)
सर्वे ऑन रूरल पुअर हैबिटेशन ऑफ इंडिया
B)
सर्वे ऑन रिटेल पेमेंट हैबिट्स ऑफ इंडीविजुअल्स
C)
सर्वे ऑन रिटेल पेमेंट हिस्ट्री ऑफ इंडिया
D)
सर्वे ऑन रिटेल पेमेंट हैबिट्स ऑफ इंडियंस
In 2019, RBI launched SRPHi, which stands for:
A)
Survey on Rural Poor Habitation of India
B)
Survey on Retail Payment Habits of Individuals
C)
Survey on Retail Payment History of India
D)
Survey on Retail Payment Habits of Indians
Answer Key : B
For(Question No. 41)
Question No. 42
यदि रेनॉल्ड्स संख्या _______ हो, तो पाइप से होने वाला द्रव का प्रवाह पटलीय (laminar) है।
A)
< 2000
B)
> 2000
C)
> 4000
D)
< 4000
If Reynolds number is _______, then the flow of fluid through a pipe is laminar.
A)
< 2000
B)
> 2000
C)
> 4000
D)
< 4000
Answer Key : A
For(Question No. 42)
Question No. 43
भारत के पहले उप-प्रधानमंत्री कौन थे?
A)
B.R. अंबेडकर
B)
मौलाना अबुल कलाम आज़ाद
C)
सरदार वल्लभभाई पटेल
D)
सरदार बलदेव सिंह
Who was the first Deputy Prime Minister of India?
A)
B.R. Ambedkar
B)
Maulana Abul Kalam Azad
C)
Sardar Vallabhbhai Patel
D)
Sardar Baldev Singh
Answer Key : C
For(Question No. 43)
Question No. 44
IS कोड के अनुसार PCC और RCC संरचनाओं के लिए न्यूनतम ग्रेड __________ होते हैं।
A)
क्रमशः M 10 और M 15
B)
क्रमशः M 15 और M 20
C)
क्रमशः M 10 और M 20
D)
क्रमशः M 20 और M 30
The minimum grades for PCC and RCC structures as per IS code is:
A)
M 10 and M 15 respectively
B)
M 15 and M 20 respectively
C)
M 10 and M 20 respectively
D)
M 20 and M 30 respectively
Answer Key : B
For(Question No. 44)
Question No. 45
नाइट लैंडिंग के लिए, थ्रेसहोल्ड को ______ से रोशन किया जाता है।
A)
हरा
B)
पीला
C)
लाल
D)
सफेद
For night landing, the runway threshold lights are lighted-
A)
Green
B)
Yellow
C)
Red
D)
White
Answer Key : A
For(Question No. 45)
Question No. 46
जाकिर हुसैन किस क्षेत्र से संबंधित हैं?
A)
साहित्य
B)
चित्रकला
C)
मूर्तिकला
D)
संगीत
With which of the following fields is Zakir Hussain associated?
A)
Literature
B)
Painting
C)
Sculpture
D)
Music
Answer Key : D
For(Question No. 46)
Question No. 47
______ तब बनता है, जब श्वेत प्रकाश का प्रत्येक रंग प्रिज्म में एक अलग कोण पर अपवर्तित होता है।
A)
स्पेक्ट्रम
B)
रंग प्रसार
C)
इंद्रधनुष
D)
रंग प्रतिबिंब
A ______ is formed when each colour of the white light is refracted in the prism at a different angle.
A)
Spectrum
B)
Colour spread
C)
Rainbow
D)
Colour image
Answer Key : A
For(Question No. 47)
Question No. 48
नाइट्रोजन परमाणुओं के 0.5 मोल का द्रव्यमान ज्ञात करें।
A)
7 ग्राम
B)
14 ग्राम
C)
21 ग्राम
D)
70 ग्राम
What is the mass of the 0.5 moles of Nitrogen atoms?
A)
7 g
B)
14 g
C)
21 g
D)
70 g
Answer Key : A
For(Question No. 48)
Question No. 49
चमक के बिखराव का अध्ययन करने के लिए किसी मैदान पर स्थित लक्ष्य को प्रकाशित करने के लिए एक विशिष्ट तरंग दैर्घ्य पर उत्पन्न विद्युत चुम्बकीय विकिरण की अन्योन्यक्रिया को क्या कहा जाता है?
A)
न्यूट्रल रिमोट सेंसिंग (Neutral remote sensing)
B)
निष्क्रिय रिमोट सेंसिंग (Passive remote sensing)
C)
सक्रिय रिमोट सेंसिंग (Active remote sensing)
D)
रिमोट सेंसिंग (Remote sensing)
The interaction of the electromagnetic radiation produced with a specific wave length to illuminate a target on the terrain for studying its scattered radiance, is called:
A)
Neutral remote sensing
B)
Passive remote sensing
C)
Active remote sensing
D)
Remote sensing
Answer Key : C
For(Question No. 49)
Question No. 50
अपवर्तनांक का मात्रक क्या है?
A)
m /s
B)
कोई मात्रक नहीं
C)
डायोप्टर
D)
m-1
What is the unit of refractive index?
A)
m /s
B)
No unit
C)
Dioptre
D)
m-1
Answer Key : B
For(Question No. 50)
Question No. 51
अंतिम पदों के समतल में दिए गए ब्रेसिंग को क्या कहा जाता है?
A)
पोर्टल ब्रेसिंग
B)
टॉप लेटरल ब्रेसिंग
C)
बॉटम लेटरल ब्रेसिंग
D)
स्वे ब्रेसिंग
The bracing provided in the plane of end posts is called-
A)
Portal bracing
B)
Top lateral bracing
C)
Bottom lateral bracing
D)
Sway bracing
Answer Key : A
For(Question No. 51)
Question No. 52
सीमेंट की मज़बूती, _______ द्वारा जांची जाती है।
A)
होपर उपकरण
B)
ली-कैटेलियर उपकरण
C)
विकैट उपकरण
D)
आइजॉड उपकरण
Soundness of cement is tested by-
A)
Hopper apparatus
B)
Le-chatelier apparatus
C)
Vicat apparatus
D)
Izod apparatus
Answer Key : B
For(Question No. 52)
Question No. 53
किसी साइट की मिट्टी में दो परतें हैं। ऊपरी परत की पारगम्यता k इकाई और निचली परत में पारगम्यता 5k इकाई है। यदि दोनों परतों की मोटाई समान है, तो ऊर्ध्वाधर दिशा में औसत पारगम्यता ज्ञात कीजिए।
A)
(5/3) k इकाई
B)
3k इकाई
C)
(6/5) k इकाई
D)
(5/6) k इकाई
Soil at a site consists of two layers. The top layer has permeability k units and bottom layer has permeability 5k units. If the thickness of both the layers is equal, then what is the average permeability in the vertical direction?
A)
(5/3)k units
B)
3k units
C)
(6/5)k units
D)
(5/6)k units
Answer Key : A
For(Question No. 53)
Question No. 54
इनमें से किस प्रकार की छत में दोनों दिशाओं में ढलान होती है और प्रत्येक दिशा में ढलान में एक ब्रेक होता है?
A)
हिप रूफ
B)
गैबल रूफ
C)
मंसर्ड रूफ
D)
गैम्ब्रेल रूफ
Which of the following is the type of roof which slopes in two directions with a break in the slope on each side?
A)
Hip roof
B)
Gable roof
C)
Mansard roof
D)
Gambrel roof
Answer Key : D
For(Question No. 54)
Question No. 55
सुपरप्लास्टिसाइज़र किस परिघटना द्वारा कंक्रीट के जमाव (Slump) में वृद्धि करता है?
A)
सीमेंट कणों का खराब होना
B)
सीमेंट के कणों का सूखना
C)
सीमेंट कणों के परिक्षेपण और अनूर्णन (deflocculation)
D)
सीमेंट कणों का घनीभवन
Superplasticizer increases slump of concrete due to which phenomenon?
A)
Deterioration of cement particles
B)
Drying of cement particles
C)
Dispersion and deflocculation of cement particles
D)
Densification of cement particles
Answer Key : C
For(Question No. 55)
Question No. 56
फाइबर प्रबलित कंक्रीट में, यदि फाइबर ठीक से नहीं फैलता है, तो परिणामस्वरूप उत्पन्न होने वाली समस्या को क्या कहा जाता है?
A)
पृथक्करण (Segregation)
B)
गुलिकायन (Balling)
C)
संकुलन (Congestion)
D)
उत्खंडन (Spalling)
In fibre reinforced concrete, if the fibres are not dispersed properly, then the resulting problem is called as –
A)
Segregation
B)
Balling
C)
Congestion
D)
Spalling
Answer Key : B
For(Question No. 56)
Question No. 57
इनमें से कौन सा कथन सही है?
लकड़ी की सामर्थ्य-
A)
ग्रेन के 45° दिशा में अधिकतम होती है।
B)
सभी दिशाओं में समान होती है।
C)
ग्रेन के लंबवत दिशा में अधिकतम होती है।
D)
इसके ग्रेन के समानांतर दिशा में अधिकतम होती है।
Which of the following is the correct statement?
The strength of timber :
A)
Is maximum in the direction 45° to the grain
B)
Remains same in all directions
C)
Is maximum in the direction perpendicular to the grain
D)
Is maximum in the direction parallel to the grain
Answer Key : D
For(Question No. 57)
Question No. 58
रिवेट छिद्रों के केंद्रों के बीच की दूरी से _________ कम नहीं होनी चाहिए।
A)
छिद्रों के व्यास के 3.5 गुने
B)
छिद्रों के व्यास के 2 गुने
C)
छिद्रों के व्यास के 2.5 गुने
D)
छिद्रों के व्यास के 3 गुने
The distance between centres of rivert holes should not be less than –
A)
3.5 times the diameter of the holes
B)
2 times the diameter of the holes
C)
2.5 times the diameter of the holes
D)
3 times the diameter of the holes
Answer Key : C
For(Question No. 58)
Question No. 59
______ की वजह से कम्पास सर्वेक्षण में स्थानीय आकर्षण मौजूद हो सकता है।
A)
सुई के चुंबकत्व की हानि
B)
धुरी (Pivot) पर सुई के घर्षण
C)
मापयंत्र के पास चुंबकीय पदार्थों की उपस्थिति
D)
चुंबकीय सुई की गलत लेवलिंग
Local attraction in compass surveying may exist due to-
A)
Loss of magnetism of the needle
B)
Friction of the needle at the pivot
C)
Presence of magnetic substances near the instrument
D)
Incorrect levelling of the magnetic needle
Answer Key : C
For(Question No. 59)
Question No. 60
कोबाल्ट _____ सामग्री का एक उदाहरण है।
A)
प्रतिचुंबकीय (Diamagnetic)
B)
अचुंबकीय (Non-magnetic)
C)
लौहचुंबकीय (Ferromagnetic)
D)
अनुचुंबकीय (Paramagnetic)
Cobalt is an example of a _____ material.
A)
Diamagnetic
B)
Non-magnetic
C)
Ferromagnetic
D)
Paramagnetic
Answer Key : C
For(Question No. 60)
Question No. 61
हवाओं की सामर्थ्य को इनमें से किसके द्वारा मापा जाता है?
A)
पवन सूचक (Wind indicator)
B)
वायुदाबमापी (Barometers)
C)
टिंटोमीटर (Tintometer)
D)
बोफर्ट मापक्रम (Beaufort scale)
The strength of winds is measured with the help of-
A)
Wind indicator
B)
Barometers
C)
Tintometer
D)
Beaufort scale
Answer Key : D
For(Question No. 61)
Question No. 62
निम्नलिखित में से सही कथन का चयन करें।
A)
इंजीनियरिंग अर्थव्यवस्था को समझने के लिए, व्यक्ति को मूल शब्दावली और अर्थव्यवस्था की मूलभूत अवधारणाओं को वर्गीकृत करने में सक्षम होना चाहिए।
B)
विकल्पों में से सभी
C)
इंजीनियरिंग अर्थव्यवस्था, एक निर्णय-सहायक उपकरण है, जिसके द्वारा किसी विधि को सर्वाधिक किफायती विधि के रूप में चुना जाएगा।
D)
इंजीनियरिंग अर्थव्यवस्था, उन गणितीय तकनीकों का एक ऐसा संग्रह है, जो आर्थिक तुलनाओं को सरल बनाती हैं।
Pick up the correct statement from the following.
A)
For understanding the engineering economy, one should be able to classify the basic terminology and fundamental concepts of economy
B)
All of the options
C)
Engineering economy is a decision assistance tool by which one method will be chosen as the most economical one
D)
Engineering economy is a collection of mathematical techniques which simplify economic comparisons
Answer Key : B
For(Question No. 62)
Question No. 63
बंकन आघूर्ण के कारण उत्पन्न प्रतिबलों को क्या कहा जाता है?
A)
तन्यता प्रतिबल (Tensile stress)
B)
अपरूपण प्रतिबल (Shear stress)
C)
संपीडन प्रतिबल (Compressive stress)
D)
आनमनी प्रतिबल (Flexural stress)
The stresses caused by the bending moment is called –
A)
Tensile stress
B)
Shear stress
C)
Compressive stress
D)
Flexural stress
Answer Key : D
For(Question No. 63)
Question No. 64
जब कोई पिंड, दूसरे पिंड की सतह पर लुढ़कता है, तो इसकी गति का विरोध करने वाले बल को क्या कहा जाता है?
A)
स्थिरवैद्युत घर्षण (Electrostatic friction)
B)
स्थैतिक घर्षण (Static friction)
C)
सर्पी घर्षण (Sliding friction)
D)
बेल्लन घर्षण (Rolling friction)
When one body rolls over the surface of another body, the resistance to its motion is called-
A)
Electrostatic friction
B)
Static friction
C)
Sliding friction
D)
Rolling friction
Answer Key : D
For(Question No. 64)
Question No. 65
प्रक्षेप्य की अधिकतम ऊंचाई को इनमें से किस सूत्र द्वारा व्यक्त किया जाता है?
A)
(u2 cos2α)/2g
B)
(u2 cos2α)/2g
C)
(u2 sin2α)/2g
D)
(u2 sin2α)/g
The maximum height of a projectile is given by-
A)
(u2 cos2α)/2g
B)
(u2 cos2α)/2g
C)
(u2 sin2α)/2g
D)
(u2 sin2α)/g
Answer Key : C
For(Question No. 65)
Question No. 66
‘विश्व वन्यजीव दिवस’ कब मनाया जाता है?
A)
17 मार्च
B)
3 मार्च
C)
10 मार्च
D)
5 मार्च
When is ‘World Wildlife Day’ observed?
A)
17 March
B)
3 March
C)
10 March
D)
5 March
Answer Key : B
For(Question No. 66)
Question No. 67
सीमेंट निर्माण में प्रयुक्त जिप्सम ______ की भांति कार्य करता है।
A)
प्लॉस्टिसाइजर
B)
ऐक्सिलेरेटर
C)
रिटार्डर
D)
एयर एंट्रेनिंग एजेंट
Gypsum used in cement manufacturing acts as a/an-
A)
Plasticizer
B)
Accelerator
C)
Retarder
D)
Air entraining agent
Answer Key : C
For(Question No. 67)
Question No. 68
बाइनरी नंबर 10010 की 1- पूरक _________ है।
A)
11101
B)
01111
C)
10101
D)
01101
The 1’s complement of binary number 10010 is-
A)
11101
B)
01111
C)
10101
D)
01101
Answer Key : D
For(Question No. 68)
Question No. 69
इनमें से कौन सा घरों के लिए प्रयुक्त बाढ़रोधी उपाय नहीं है?
A)
अवरोधन बेसिन (Detention basins)
B)
ड्राई फ्लड प्रूफिंग
C)
फ्लड वाल
D)
उन्नयन (Elevation)
Which of the following is NOT a flood proofing measure for houses?
A)
Detention basins
B)
Dry flood proofing
C)
Flood walls
D)
Elevation
Answer Key : A
For(Question No. 69)
Question No. 70
Fe + CuSO4 → FeSO4 + Cu उपरोक्त अभिक्रिया _______ का एक उदाहरण है।
A phreatic line is defined as the line within a dam section below which there is/are-
A)
Positive hydrostatic pressure
B)
Negative equipotential lines
C)
Positive equipotential lines
D)
Negative hydrostatic pressure
Answer Key : A
For(Question No. 93)
Question No. 94
टिंटोमीटर का उपयोग इनमें से किसके मापन के लिए किया जाता है?
A)
कठोरता
B)
रंग
C)
तापमान
D)
गंध (Odour)
Tintometer is used to measure-
A)
Hardness
B)
Colour
C)
Temperature
D)
Odour
Answer Key : B
For(Question No. 94)
Question No. 95
इनमें से कौन सा जलजनित रोग है?
A)
तपेदिक
B)
छोटी चेचक
C)
हैज़ा
D)
एंथ्रेक्स
Which of the following is a waterborne disease?
A)
Tuberculosis
B)
Small pox
C)
Cholera
D)
Anthrax
Answer Key : C
For(Question No. 95)
Question No. 96
वह फ्लेक्सिबल कर्व, जिसमें रबर के अंदर एक लेड की छड़ होती है, जिसे किन्हीं भी बिंदुओं के बीच एक सतत वक्र (smooth curve) खींचने के लिए आसानी से मोड़ा जा सकता है, उसे क्या कहा जाता है?
A)
फ्रेंच कर्व
B)
स्केल
C)
सेट स्क्वायर
D)
डिवाइडर
A flexible curve consists of a lead bar inside rubber which bends conveniently to draw a smooth curve through any set of points. Which of the following drawing aid is this?
A)
French curves
B)
Scale
C)
Set square
D)
Divider
Answer Key : A
For(Question No. 96)
Question No. 97
यदि डिज़ाइन के अनुसार दो अलग-अलग फ़ुटिंग बहुत नजदीक हों, तो उन्हें ______ के रूप में परिवर्तित किया जाना चाहिए।
A)
मैट राफ्ट
B)
कंबाइंड फुटिंग
C)
स्ट्रिप रैफ्ट
D)
स्ट्रैप फुटिंग
If two individual footings are too close as per design, then they should be converted as-
A)
Mat raft
B)
Combined footing
C)
Strip raft
D)
Strap footing
Answer Key : B
For(Question No. 97)
Question No. 98
केंद्र-संकेंद्रित भार के अधीन स्पैन L वाली एक साधारण समर्थित बीम का केंद्रीय विक्षेपण 24 मिमी है। तो समर्थन बिन्दुओं (supports) पर ढलान ज्ञात कीजिए।
A)
(36/L) रेडियन
B)
(72/L) रेडियन
C)
(48/L) रेडियन
D)
(24/L) रेडियन
In a simply supported beam of span L subjected to central concentrated load, the central deflection is 24 mm. Then the slope at supports is:
A)
(36/L) radians
B)
(72/L) radians
C)
(48/L) radians
D)
(24/L) radians
Answer Key : B
For(Question No. 98)
Question No. 99
इनमें से किस प्रकार का भूमि-निम्नीकरण (land degradation) भारत में अधिक देखने को मिलता है?
A)
भूस्खलन (Landslide)
B)
मृदा अपरदन (Soil erosion)
C)
बंजर (Desertification)
D)
मृदा उपधारा (Soil subsidence)
Which of the following forms of land degradation is more prevalent in India?
A)
Landslide
B)
Soil erosion
C)
Desertification
D)
Soil subsidence
Answer Key : B
For(Question No. 99)
Question No. 100
किसी पदार्थ के एकांक द्रव्यमान के तापमान को एक डिग्री सेंटीग्रेड बढ़ाने के लिए आवश्यक ऊष्मा की मात्रा को क्या कहा जाता है?
A)
तापीय प्रतिबल (Temperature stress)
B)
तापीय प्रसार (Thermal expansion)
C)
जलयोजन ऊष्मा (Heat of hydration)
D)
विशिष्ट ऊष्मा (Specific Heat)
The quantity of heat required to raise the temperature of unit mass of a material by one degree centigrade is called-
A)
Temperature stress
B)
Thermal expansion
C)
Heat of hydration
D)
Specific Heat
Answer Key : D
For(Question No. 100)
Question No. 101
निम्नलिखित में से कौन सा ह्यूमनॉइड रोबोट एचडीएफसी (HDFC) बैंक द्वारा विकसित किया गया था?
A)
AJIT
B)
IRA 2.0
C)
MITRA
D)
KEMPA
Which of the following humanoid robots was developed by the HDFC bank?
A)
AJIT
B)
IRA 2.0
C)
MITRA
D)
KEMPA
Answer Key : B
For(Question No. 101)
Question No. 102
स्टेज को विभिन्न स्तरों में विभाजित करने के लिए प्रयुक्त संरचना को क्या कहा जाता है?
A)
छत (Roof)
B)
सीलन रोधी कोर्स (Damp proof course)
C)
फर्श (Floor)
D)
चौखट (Lintels)
The structure which is used to divide the stages in different levels is termed as-
A)
Roof
B)
Damp proof course
C)
Floor
D)
Lintels
Answer Key : C
For(Question No. 102)
Question No. 103
एकसमान स्थापन (uniform settlement) में कोई भी बाधा आने पर उत्पन्न होने वाली दरार को क्या कहा जाता है?
A)
अपरूपण दरार (Shear crack)
B)
स्थापन दरार (Settlement crack)
C)
अनुदैर्ध्य दरार (Longitudinal crack)
D)
यादृच्छिक दरार (Random Crack)
If there is any obstruction to the uniform settlement of hardened concrete, it forms a crack known as-
A)
Shear crack
B)
Settlement crack
C)
Longitudinal crack
D)
Random crack
Answer Key : B
For(Question No. 103)
Question No. 104
इनमें से कौन सा निरपेक्ष श्यानता (absolute viscosity) और द्रव्यमान घनत्व (mass density) का अनुपात है?
A)
श्यानता गुणांक
B)
श्यानता सूचकांक
C)
शुद्धगतिक श्यानता (Kinematic viscosity)
D)
विशिष्ट श्यानता
Which of the following is the ratio of absolute viscosity to mass density?
A)
Coefficient of viscosity
B)
Viscosity index
C)
Kinematic viscosity
D)
Specific viscosity
Answer Key : C
For(Question No. 104)
Question No. 105
मुक्त सिरे पर एक केंद्रित भार P वाली एक कैंटीलीवर बीम के मुक्त सिरे का विक्षेपण ज्ञात कीजिए।
A)
δ=PL3 / 34EI
B)
δ=PL3 / 3EI
C)
δ=PL3 / 5EI
D)
δ=PL3 / 365EI
Find the deflection of the free end of a cantilever beam carrying a concentrated load P at the free end.
A)
δ=PL3 / 34EI
B)
δ=PL3 / 3EI
C)
δ=PL3 / 5EI
D)
δ=PL3 / 365EI
Answer Key : B
For(Question No. 105)
Question No. 106
निम्नलिखित में से कौन सा आकलन (estimate) सर्वाधिक विश्वसनीय होता है?
A)
प्लिंथ क्षेत्रफल का आकलन (Plinth area estimate)
B)
प्रारंभिक आकलन (Preliminary estimate)
C)
विस्तृत आकलन (Detailed estimate)
D)
घन दर आकलन (Cube rate estimate)
Which of the following is the most reliable estimate?
A)
Plinth area estimate
B)
Preliminary estimate
C)
Detailed estimate
D)
Cube rate estimate
Answer Key : C
For(Question No. 106)
Question No. 107
दो आसन्न ट्रसों (trusses) के बीच का स्थान ______ कहलाता है।
A)
बे (Bay)
B)
पिच (Pitch)
C)
पैनल (Panel)
D)
स्पैन (Span)
The space between two adjacent trusses is called-
A)
Bay
B)
Pitch
C)
Panel
D)
Span
Answer Key : A
For(Question No. 107)
Question No. 108
विशिष्ट रैपिड सैंड फिल्टर में बैक-वाशिंग और निस्यंदन का अनुपात कितना होता है?
A)
6
B)
2
C)
4
D)
10
What is the ratio of back-washing of filtration in a typical rapid sand filter?
A)
6
B)
2
C)
4
D)
10
Answer Key : A
For(Question No. 108)
Question No. 109
यदि किसी इलाके में सार्वजनिक जल निकासी प्रणाली उपलब्ध नहीं है, तो शौचालयों से निकलने वाले अपशिष्ट जल को संग्रहीत करने के लिए किस संरचना का उपयोग किया जाता है?
A)
ओवरहेड टैंक
B)
सेप्टिक टैंक
C)
स्टोरेज टैंक
D)
नाबदान (Sump)
In case public drainage system is not available in a locality, then the structure used to store waste water from toilets is:
A)
Overhead tank
B)
Septic Tank
C)
Storage Tank
D)
Sump
Answer Key : B
For(Question No. 109)
Question No. 110
इमारत के निपातन की सीमित स्थिति के लिए, कंक्रीट और सुदृढ़ीकरण स्टील की डिजाइन सामर्थ्य का आकलन करने के लिए IS 456: 2000 द्वारा अनुशंसित आंशिक सुरक्षा गुणक क्रमशः _______ होते हैं।
A)
1.5 और 1.0
B)
1.15 और 1.5
C)
1.5 और 1.15
D)
1.0 और 1.0
For limit state of collapse, the partial safety factors recommended by IS 456:2000 for estimating the design strength of concrete and reinforcing steel are respectively-
A)
1.5 and 1.0
B)
1.15 and 1.5
C)
1.5 and 1.15
D)
1.0 and 1.0
Answer Key : C
For(Question No. 110)
Question No. 111
इनमें से किस शहर को स्वच्छ सर्वेक्षण पुरस्कार 2019 के अंतर्गत भारत के सर्वाधिक स्वच्छ शहर के रूप में पुरस्कृत किया गया?
A)
इंदौर
B)
मैसूर
C)
अंबिकापुर
D)
अहमदाबाद
To which of the following cities was Swachh Survekshan Award 2019 for India’s cleanest city given?
A)
Indore
B)
Mysore
C)
Ambikapur
D)
Ahmedabad
Answer Key : A
For(Question No. 111)
Question No. 112
टेर्ज़ागी के संधारण क्षमता गुणक किस पर निर्भर करता है?
A)
केवल मिट्टी के आंतरिक घर्षण कोण पर
B)
मिट्टी के आंतरिक घर्षण कोण और नींव की गहराई पर
C)
मिट्टी के एकरूपता गुणांक और मिट्टी के शुष्क घनत्व पर
D)
मिट्टी के वक्रता गुणांक और मिट्टी के स्थूल घनत्व का गुणांक पर
Terzaghi’s bearing capacity factors depend on-
A)
Angle of internal friction of soil only
B)
Angle of internal friction of soil and depth of foundation
C)
Uniformity coefficient of soil and dry density of soil
D)
Coefficient of curvature of soil and bulk density of soil
Answer Key : A
For(Question No. 112)
Question No. 113
वह विधि, जिसमें मोर्टार को एक नली के माध्यम से प्रवाहित किया जाता है और वायुचालित रूप से उच्च वेग के साथ सतह पर प्रक्षेपित किया जाता है, ________ कहलाती है।
A)
गनाइट
B)
वार्निशिंग
C)
कंक्रीटिंग
D)
फेरोसमेंट
A method in which mortar conveyed through a hose and pneumatically projected at a high velocity onto a surface is called-
A)
Gunite
B)
Varnishing
C)
Concreting
D)
Ferrocement
Answer Key : A
For(Question No. 113)
Question No. 114
M सैंड के निर्माण के लिए प्रयुक्त सर्वोत्तम प्रकार का क्रशर इनमें से कौन सा है?
A)
VSI क्रशर
B)
जॉ क्रशर
C)
कोन क्रशर
D)
रोल क्रशर
The best type of crusher for manufacturing M Sand is –
A)
VSI Crusher
B)
Jaw Crusher
C)
Cone Crusher
D)
Roll Crusher
Answer Key : A
For(Question No. 114)
Question No. 115
ICAO की अनुशंसाओं के अनुसार, MSL के ऊपर स्थित रनवे के लिए उन्नयन सुधार (elevation correction) की दर क्या है?
A)
MSL के ऊपर स्थित उन्नयन की प्रति 500 मीटर ऊंचाई पर 2%
B)
MSL के ऊपर स्थित उन्नयन की प्रति 300 मीटर ऊंचाई पर 2%
C)
MSL के ऊपर स्थित उन्नयन की प्रति 300 मीटर ऊंचाई पर 7%
D)
MSL के ऊपर स्थित उन्नयन की प्रति 100 मीटर की ऊंचाई पर 1%
According to ICAO recommendations, what is the rate of elevation correction for the runway above MSL?
A)
2% for every 500 m of elevation above MSL
B)
2% for every 300 m of elevation above MSL
C)
7% of every 300 m of elevation above MSL
D)
1% for every 100 m of elevation above MSL
Answer Key : C
For(Question No. 115)
Question No. 116
230 × 400 मिमी आकार वाली एक कैंटिलीवर बीम का क्लियर स्पैन (clear span) 2.5 मीटर है और यह 400 × 400 मिमी के स्तंभ द्वारा समर्थित है। कैंटिलीवर का प्रभावी स्पैन क्या होगा?
A)
2.7 मीटर
B)
2.615 मीटर
C)
2.9 मीटर
D)
3.3 मीटर
A cantilever beam of size 230 × 400 mm has a clear span of 2.5 m and is supported on a 400 × 400 mm column. The effective span of the cantilever is-
A)
2.7 m
B)
2.615 m
C)
2.9 m
D)
3.3 m
Answer Key : A
For(Question No. 116)
Question No. 117
________ प्रवाह सांतत्य समीकरण (equation of continuity) लागू होता है।
A)
अनुप्रस्थ खंड पर वेग एकसमान होने पर
B)
प्रवाह एकआयामी होने पर
C)
विकल्पों में से सभी
D)
प्रवाह अनरवत होने पर
The equation of continuity of flow is applicable when the-
A)
Velocity is uniform over the cross section
B)
Flow is one dimensional
C)
All of the options
D)
Flow is steady
Answer Key : C
For(Question No. 117)
Question No. 118
लंगर (moorings) क्यों प्रदान किए जाते हैं?
A)
जहाजों की एंकरिंग के लिए
B)
जहाजों की मरम्मत के लिए
C)
जहाजों और शिपबोर्डों की धुलाई के लिए
D)
जहाजों को खींचकर समुद्र में ले जाने के लिए
Why are moorings provided?
A)
For anchoring of ships
B)
For repair of ships
C)
For washing of ships and ship boards
D)
For towing the ships to the sea
Answer Key : A
For(Question No. 118)
Question No. 119
निम्नलिखित में से सही कथन का चयन करें।
A)
तरंग की आवृत्ति हर्ट्ज़ (Hz) में मापी जाती है।
B)
तरंग का आयाम, मध्य बिंदु से इसके शिखर की ऊंचाई होती है।
C)
आवृत्ति, एक सेकंड में एक निश्चित बिंदु से गुजरने वाली तरंग शिखरों की संख्या होती है।
D)
विकल्पों में से सभी
Pick up the correct statement from the following:
A)
Frequency of a wave is measured in Hertz (Hz)
B)
Amplitude of a wave is the height of its crust from the mid-point
C)
Frequency is the number of wave crests passing a fixed point in one second
D)
All of the options
Answer Key : D
For(Question No. 119)
Question No. 120
यदि सीमेंट का प्रारंभिक स्थापन समय (setting time) 10 मिनट है, तो इसे ______ में वर्गीकृत किया जा सकता है।
A)
शीघ्र स्थापन सीमेंट (Quick setting cement)
B)
तीव्र कठोरीकरण सीमेंट (Rapid hardening cement)
C)
सल्फेट रोधी सीमेंट (Sulphate resisting cement)
D)
निम्न ऊष्मा सीमेंट (Low heat cement)
If the initial setting time of cement is 10 minutes, it can be classified as –
A)
Quick setting cement
B)
Rapid hardening cement
C)
Sulphate resisting cement
D)
Low heat cement
Answer Key : A
For(Question No. 120)
Question No. 121
प्लेट गिर्डर के ऊर्ध्वाधर कसे हुए वेब के लिए, पैनल का निम्न क्लियरेंस विमा _____ से अधिक नहीं होनी चाहिए।
A)
85 t
B)
180 t
C)
200 t
D)
250 t
For a vertical stiffened web of a plate girder, the lesser clear dimension of the panel should not exceed:
A)
85 t
B)
180 t
C)
200 t
D)
250 t
Answer Key : B
For(Question No. 121)
Question No. 122
EOT क्रेन का क्या अभिप्राय है?
A)
एंड ओपन टाइप
B)
अर्थ मूविंग ओवरहैंड ट्रक टैप
C)
इलेक्ट्रिक ओवरहेड ट्रैवेलिंग
D)
ईसी ऑपरेशन टाइप
EOT crane means-
A)
End Open Type
B)
Earth moving Overhand Truck type
C)
Electric Overhead Travelling
D)
Easy Operation Type
Answer Key : C
For(Question No. 122)
Question No. 123
मिट्टी में क्विक सैंड स्थिति कब उत्पन्न होती है?
A)
नीचे की दिशा के प्रवाह के कारण हेड बढ़ जाता है।
B)
ऊपरी प्रवाह के कारण हेड घट जाता है।
C)
नीचे की दिशा के प्रवाह के कारण हेड घट जाता है।
D)
ऊपरी प्रवाह के कारण हेड बढ़ जाता है।
When does a quick sand condition is developed in soil?
A)
Head causing downward flow is increased
B)
Head causing upward flow is decreased
C)
Head causing downward flow is decreased
D)
Head causing upward flow is increased
Answer Key : D
For(Question No. 123)
Question No. 124
FRC में प्रयुक्त फाइबर को ______ भी कहा जाता है।
A)
कृश प्रबलन (Slender reinforcements)
B)
सुपर रीइन्फोर्समेंट
C)
द्वितीयक प्रबलन (Secondary reinforcements)
D)
स्लिम रीइन्फोर्समेंट
Fibres used in FRC are also called as –
A)
Slender reinforcements
B)
Super reinforcements
C)
Secondary reinforcements
D)
Slim reinforcements
Answer Key : C
For(Question No. 124)
Question No. 125
कैरिज वे (carriage way) के उच्चतम बिंदु को क्या कहा जाता है?
A)
सुपर एलीवेशन
B)
ग्रेडिएंट
C)
कैंबर
D)
क्राउन
The highest point on a carriage way is known as-
A)
Super elevation
B)
Gradient
C)
Camber
D)
Crown
Answer Key : D
For(Question No. 125)
Question No. 126
द्रव्यमान (m) और लंबाई (l) वाली एक समान पतली एक छड़ का इसकी लंबाई के लंबवत दिशा में इसके मध्य बिंदु के चारों ओर द्रव्यमान जड़त्व आघूर्ण ज्ञात कीजिए।
A)
ml2/12
B)
2/3 ml2
C)
3/4 ml2
D)
ml2/3
Mass moment of inertia of a uniform thin rod of mass (m) and length (l) about its mid-point and perpendicular to its length is-
A)
ml2/12
B)
2/3 ml2
C)
3/4 ml2
D)
ml2/3
Answer Key : A
For(Question No. 126)
Question No. 127
निष्क्रिय सेंसर (passive sensor) ________ का उपयोग करता है।
A)
ऊर्जा के स्रोत के रूप में फ्लैश लाइट का
B)
ऊर्जा स्रोत के रूप में सूर्य
C)
इसका अपना ऊर्जा स्रोत होता है
D)
ट्रांसमिशन टावरों से निकलने वाले सिग्नल
A passive sensor uses:
A)
Flash light as a source of energy
B)
Sun as the source of energy
C)
Its own source of energy
D)
Signals emitted from transmission towers
Answer Key : B
For(Question No. 127)
Question No. 128
कार्बन 14 से किस प्रकार का विकिरण उत्सर्जित होता है?
A)
बीटा
B)
विकल्पों में से सभी
C)
गामा
D)
अल्फा
Which type of radiation is emitted from Carbon 14?
A)
Beta
B)
All of the options
C)
Gamma
D)
Alpha
Answer Key : A
For(Question No. 128)
Question No. 129
चिनाब, रावी, ब्यास, सतलुज और यमुना नदियाँ किस राज्य से होकर बहती हैं?
A)
पंजाब
B)
जम्मू एवं कश्मीर
C)
हिमाचल प्रदेश
D)
हरियाणा
Through which state do the rivers Chenab, Ravi, Beas, Sutlej and Yamuna flow?
A)
Punjab
B)
Jammu & Kashmir
C)
Himachal Pradesh
D)
Haryana
Answer Key : C
For(Question No. 129)
Question No. 130
इलेक्ट्रॉन की खोज ____________ द्वारा की गई थी।
A)
नील्स बोह्र
B)
J. चाडविक
C)
J.J. थॉमसन
D)
गोल्डस्टीन
Electron was discovered by ____________.
A)
Neils Bohr
B)
J. Chadwick
C)
J.J. Thomson
D)
Goldstein
Answer Key : C
For(Question No. 130)
Question No. 131
मिताली राज निम्नलिखित में से किस खेल से संबंधित है?
A)
गोल्फ़
B)
बास्केटबॉल
C)
फ़ुटबॉल
D)
क्रिकेट
With which of the following sports is Mithali Raj associated?
A)
Golf
B)
Basketball
C)
Football
D)
Cricket
Answer Key : D
For(Question No. 131)
Question No. 132
पुल के नीचे से गुजरते समय पानी के सामान्य स्तर से ऊपर उठ जाने को क्या कहा जाता है?
A)
क्लियरेंस
B)
फ्री बोर्ड
C)
अभिमार्जन (Scour)
D)
अभिवाह (Afflux)
The heading up of water above its normal level while passing under the bridge is known as-
A)
Clearance
B)
Free board
C)
Scour
D)
Afflux
Answer Key : D
For(Question No. 132)
Question No. 133
मिट्टी की ढलान की खुदाई जैसी अनलोडिंग संबंधी समस्याओं की तत्काल स्थिरता का आकलन करने के लिए प्रयुक्त त्रिअक्षीय परीक्षण (triaxial test) इनमें से कौन सा है?
A)
UU परीक्षण
B)
CU परीक्षण
C)
अनकंसोलिडेटेड ड्रेंड टेस्ट
D)
CD परीक्षण
Which of the following is the appropriate triaxial test to assess the immediate stability of an unloading problem, such as an excavation of a clay slope?
A)
UU test
B)
CU test
C)
Unconsolidated drained test
D)
CD test
Answer Key : A
For(Question No. 133)
Question No. 134
त्रिक (Triad) का नियम किसके द्वारा दिया गया था?
A)
D.I. मेंडलीव
B)
जॉन न्यूलैंड्स
C)
J.W. डोबेराइनर
D)
हेनरी मोसले
The Law of Triad was given by-
A)
D.I. Mendeleev
B)
John Newlands
C)
J.W. Dobereiner
D)
Henry Moseley
Answer Key : C
For(Question No. 134)
Question No. 135
चालू सम्पत्तियों से चालू देनदारियों के अनुपात को ____ कहा जाता है।
The ratio of current assets to current liabilities is known as:
A)
Current ratio
B)
Liquidity ratio
C)
Acid-test (or quick) ratio
D)
Debts ratio
Answer Key : A
For(Question No. 135)
Question No. 136
पूर्व प्रतिबलित कंक्रीट में, उच्च ग्रेड कंक्रीट का उपयोग क्यों किया जाता है?
A)
निम्न तननशीलता वाला कंक्रीट प्राप्त करने के लिए
B)
उच्च भंगुरता वाला कंक्रीट प्राप्त करने के लिए
C)
पूर्व प्रतिबलित हानि को नियंत्रित करने के लिए
D)
निम्न क्रीप प्राप्त करने के लिए
In pre-stressed concrete, high grade concrete is used for –
A)
Having concrete of low ductility
B)
Having concrete of high brittleness
C)
Controlling the pre-stress loss
D)
Having Low creep
Answer Key : D
For(Question No. 136)
Question No. 137
RE वाल का पूरा नाम क्या है?
A)
रीइन्फ़ोर्स्ड अर्थ वाल
B)
रिटेनिंग अर्थ वाल
C)
रेसिस्टेंट अर्थ वाल
D)
रिवेटमेंट अर्थ वाल
RE wall means –
A)
Reinforced Earth Wall
B)
Retaining Earth Wall
C)
Resistant Earth Wall
D)
Revetment Earth Wall
Answer Key : A
For(Question No. 137)
Question No. 138
_______, किसी आमंत्रण के जवाब में बोलियां या प्रस्ताव आमंत्रित करने की प्रक्रिया है।
A)
स्टार्टिंग
B)
टेंडरिंग
C)
प्लानिंग
D)
शेड्यूलिंग
_______ is the process of inviting bids or proposal in response to an invitation.
A)
Starting
B)
Tendering
C)
Planning
D)
Scheduling
Answer Key : B
For(Question No. 138)
Question No. 139
किसी पाइल को स्तंभ (column) के रूप में डिजाइन करते समय, अंतिम स्थितियां (end conditions) –
A)
दोनों सिरे कब्जों से कसे होते हैं।
B)
एक सिरा फिक्स होता है और दूसरा सिरा कसा होता है।
C)
एक सिरा फिक्स होता है और दूसरा सिरा खुला होता है।
D)
दोनों सिरे फिक्स होते हैं।
While designing the pile as a column, the end conditions adopted is –
A)
Both ends hinged
B)
One end fixed and other end hinged
C)
One end fixed and other end free
D)
Both ends fixed
Answer Key : B
For(Question No. 139)
Question No. 140
झारखंड के इनमें से किस जिले में बॉक्साइट पाया जाता है?
A)
विकल्पों में से सभी
B)
लतेहर
C)
गुमला
D)
लोहारडागा
In which of the following districts of Jharkhand is bauxite obtained?
A)
All of the options
B)
Latehar
C)
Gumla
D)
Lohardaga
Answer Key : A
For(Question No. 140)
Question No. 141
6 मीटर x 4 मीटर के आयताकार शीर्ष और 4 मीटर x 2 मीटर की तली वाले 6 मीटर गहरे टैंक का आयतन ज्ञात कीजिए (प्रिज़्माभीय सूत्र का उपयोग करके गणना करें)?
A)
92 मीटर 3
B)
94 मीटर 3
C)
96 मीटर 3
D)
90 मीटर 3
What is the volume of a 6 m deep tank having rectangular shaped top 6 m x 4 m and bottom 4 m x 2m (computed through the use of prismoidal formula)?
A)
92 m3
B)
94 m3
C)
96 m3
D)
90 m3
Answer Key : A
For(Question No. 141)
Question No. 142
जब किसी वस्तु को त्वरित किया जाता है, तो –
A)
यह हमेशा ऊपर की ओर जाती है।
B)
यह हमेशा नीचे की ओर जाती है।
C)
यह हमेशा पृथ्वी की ओर गिरती है।
D)
उस पर हमेशा एक बल कार्य करता है।
When an object undergoes acceleration-
A)
It always moves up
B)
It always moves down
C)
It always falls towards the earth
D)
A force always acts on it
Answer Key : D
For(Question No. 142)
Question No. 143
निम्नलिखित में से किस क्रिकेट खिलाड़ी को अप्रैल 2019 में मेरिलबोन क्रिकेट क्लब (MCC) के मानद आजीवन सदस्य के रूप में शामिल किया गया?
A)
इंजमाम-उल-हक और मार्क बाउचर दोनों
B)
इंजमाम-उल-हक
C)
विराट कोहली
D)
मार्क बाउचर
Which of the following cricketers was/were inducted as the Honorary Life Members of the Marylebone Cricket Club (MCC) in April, 2019?
A)
Both Inzamam-ul-Haq and Mark Boucher
B)
Inzamam-ul-Haq
C)
Virat Kohli
D)
Mark Boucher
Answer Key : A
For(Question No. 143)
Question No. 144
घर्षण की वजह से पाइप में होने वाली शीर्ष हानि की गणना किसके द्वारा की जाती है?
A)
चेजी का नियम
B)
डार्सी-वीज़बेक समीकरण (Darcy–Weisbach equation)
C)
डार्सी का नियम
D)
ऊर्जा हानि
The loss of head in pipe due to friction is calculated by-
A)
Chezy’s law
B)
Darcy–Weisbach equation
C)
Darcy’s law
D)
Energy loss
Answer Key : B
For(Question No. 144)
Question No. 145
पूर्व प्रतिबलित कंक्रीट संरचनाओं का मुख्य उद्देश्य क्या है?
A)
अपरूपण प्रतिबल आरोपित करना
B)
ज़ोन में जहाँ भी तनन प्रतिबलों की उपस्थिति अपेक्षित हो, वहाँ संपीडन प्रतिबल लागू करना
C)
तनन प्रतिबल आरोपित करना
D)
परिक्षेपण (deflection) आरोपित करना
What is the main principle of Prestressed Concrete Structures?
A)
To introduce shear stress
B)
To introduce compressive stresses in the zone wherever tensile stresses are expected
C)
To introduce tensile stresses
D)
To introduce deflection
Answer Key : B
For(Question No. 145)
Question No. 146
तीव्र उपचारित तरल बिटुमेन (rapid curing cutbacks bitumen) के 360° C तक आसवन से प्राप्त अवशेषों का भेद्यता मान (penetration value) _______ के बीच होता है।
A)
80 से 120
B)
30 से 120
C)
40 से 80
D)
100 से 160
The penetration value of residue from distillation upto 360°C of rapid curing cutbacks bitumen is –
A)
80 to 120
B)
30 to 120
C)
40 to 80
D)
100 to 160
Answer Key : A
For(Question No. 146)
Question No. 147
पट्टिका (fillet) की प्रभावी लंबाई _______ से कम होनी चाहिए।
A)
वेल्ड के आकार के चार गुने
B)
वेल्ड के आकार के दो गुने
C)
वेल्ड के आकार के तीन गुने
D)
वेल्ड के आकार के एक गुना
The effective length of fillet should be less than-
A)
Four times the size of weld
B)
Two times the size of weld
C)
Three times the size of weld
D)
One time the size of the weld
Answer Key : A
For(Question No. 147)
Question No. 148
इमहॉफ शंकु (Imhoff cone) ______ मापने के लिए उपयोग किया जाता है।
A)
कोलाइडी ठोस (Colloidal solids)
B)
घुलित ठोस (Dissolved solids)
C)
निलंबित ठोस (Suspended solids)
D)
सेटल होने वाले ठोस (Settleable solids)
Imhoff cone is used to measure-
A)
Colloidal solids
B)
Dissolved solids
C)
Suspended solids
D)
Settleable solids
Answer Key : D
For(Question No. 148)
Question No. 149
विशेष ओलंपिक विश्व खेल 2019 का उद्घाटन कहाँ हुआ था?
A)
टोक्यो (Tokyo)
B)
नई दिल्ली
C)
शंघाई
D)
अबू धाबी
Where were the Special Olympics World Games 2019 inaugurated?
A)
Tokyo
B)
New Delhi
C)
Shanghai
D)
Abu Dhabi
Answer Key : D
For(Question No. 149)
Question No. 150
पैरापेट या एजिंग (edging) में वर्षाजल के निकास हेतु प्रदान किए गए छिद्रों को क्या कहा जाता है?
A)
जलनिस्रावक छिद्र (Weep hole)
B)
छिद्र (Hole)
C)
जल रोधन (Water proofing)
D)
किनारे के छिद्र (Edge hole)
The rain waterholes in the parapet or in edging is called as-