Code No. | Description |
---|---|
IS - 4031 | Method of physical tests for hydraulic Cement |
IS - 650 | Specification for Standard sand for testing of Cement |
IS - 383 | Specification for Coarse and Fine aggregate for use in mass concrete |
IS - 515 | Specification for natural and manufactured aggregate for use in mass concrete. |
IS - 2387 | Method of test for aggregates for concrete. |
IS - 516 | Methods of test for strength of concrete. |
IS - 1199 | Methods of sampling and analysis of concrete |
IS - 3025 | Methods of sampling and test (physical and chemical) for water used in industry. |
IS - 432 | Specification for Mild steel and medium tensile bars and hard drawn steel wire. |
IS - 1139 | Specification for hot rolled mild steel, medium tensile steel and high yield strength steel deformed bars for concrete reinforcement. |
IS – 1566 | Specification for plain hard drawn steel wire fabric for concrete reinforcement |
IS - 1785 | Specification for plain hard drawn steel wire for prestressed concrete. |
IS - 1786 | Specification for cold twisted steel high strength deformed bars for concrete reinforcement. |
IS - 303 | Specification for Plywood for general purposes |
IS - 4990 | Specification for plywood for concrete shuttering work |
IS - 1629 | Rules for grading of cut size of timber |
IS - 2645 | Specification for integral cement water proofing compounds |
IS - 1791 | Specification for batch type concrete mixers |
IS - 2438 | Specification for roller pan mixer |
IS - 2505 | Specification for concrete vibrators , immersion type |
IS - 2506 | Specification for screed board concrete vibrator |
IS - 2514 | Specification for concrete vibrating tables |
IS - 3344 | Specification for pan vibrators |
IS - 4656 | Specification for form vibrators |
IS - 2722 | Specification for portable swing weigh batchers for concrete (single & double bucket type) |
IS - 2750 | Specification for steel scaffoldings. |
IS - 456 | Code of practice for plain and reinforced concrete |
IS - 1343 | Code of practice for prestressed concrete |
IS - 457 | Code of practice for general construction of plain and reinforced concrete for dams and other massive structures. |
IS - 3370 | Code of practice for concrete (Part I to IV structures for storage of liquids |
IS - 3935 | Code of practice for composite construction |
IS - 3201 | Criteria for design and construction of precast concrete trusses. |
IS - 2204 | Code of practice for construction of reinforced concrete shell roof |
IS - 2210 | Criteria for the design of R.C. shell structures and folded plates. |
IS - 2751 | Code of practice for welding of mild steel structures are folded plates |
IS - 2502 | Code of practice for bending and fixing of bars for concrete reinforcement |
IS - 3558 | Code of practice for use of immersion vibrators for consolidating concrete |
IS - 3414 | Code of practice for design and installation of joints in buildings |
IS - 4014 | Code of practice for steel tubular, scaffolding |
IS - 2571 | Code of practice for laying insitu cement concrete flooring |
IS 73 | Specification for paving Bitumen |
IS 277 | Galvanised steel sheets (plain and corrugated) |
IS 651 | Glazed stoneware pipes and fittings |
IS 702 | Specification for industrial bitumen |
IS 1199 | Methods of sampling and analysis of ConCrete |
IS 1200 (PTΧ) | Method of measurements of building and civil engineering works: Ceiling & Lining |
IS 1729 | Cast iron Drain water pipes and fitting |
IS 1367 (PT-13) | Technical supply conditions for threaded steel fasteners pt. 13 hot dip galvanized coating on threaded fasteners |
IS 2095 (PT-1) | Gypsum plaster boards (Pt.1) plain Gypsum plaster boards |
IS 2115 | Code of practice for flat roof finish: mudphuska |
IS 2633 | Method of testing uniformity of coating on zinc Coated articles |
IS 2645 | Specification for integral water proofing compounds for cement mortar & concrete |
IS 3007 (PT.1) | Code of practice for laying of asbestos cement sheets: part- 1 corrugated sheets |
IS 3087 | Particle boards of wood and other ignocellulogic materials (medium density) for general purposes - specifications |
IS 3144 | Methods of test for mineral Wool thermal insulation materials |
IS 3346 | Method of the determination of thermal conductivity of thermal insulation materials |
IS 3348 | Specification for fibre insulation boards |
IS 3384 | Specification for bitumen primer for water proofing and damp proofing |
IS 4671 | Expanded polystyrene for thermal insulation purposes |
IS 5382 | Specification for rubber sealing rings for gas mains, water mains and sewers |
IS 5688 | Methods of test of performed block type and pipe covering type thermal insulations |
IS 10192 | Specifications for synthetic resin bonded glass fibre (SRBGF) for electrical purposes. |
IS 13592 | Unplasticised polyvinyl chloride (UPVC) pipes for soil and Waste discharge system for inside and outside building. |
IS 14753 | Specifications for polymethyl Methacrylate (PMMA) (Arylic) sheets |
IS 14 862 | Fibre cement flat sheets - specifications |
IS 14871 | Specifications for products in fibre reinforced cement - Long corrugated |
IS 771 (Pt.1) | Specification for glazed fire clay sanitary appliances: Part 1: General requirements. |
IS 771 (Pt.-2) | Specification for glazed fire clay sanitary appliances: Part 2: Specific requirements of kitchen and laboratory sink. |
IS 772 | Specific action for general requirements for enameled cast iron sanitary appliances. |
IS 774 | Flushing cisterns for water closets and urinals (Other than plastic cistern)-Specifications. |
IS 1300 | Phenolic moulding materials.- Specifications |
IS 1703 | Water fittings- Copper alloy float valves (horizontal plunger type) - Specification. |
IS 1795 | Specification for pillar taps for Water supply purposes. |
IS 2267 | Polystyrene moulding and extrusion materials - Specifications |
IS 2326 | Specification for Automatic Flushing Cisterns for Urinals (Other than plastic cisterns) |
IS 2548 (Part-1 | Plastic Seats and Covers for Water closets Part 1: Thermo Set Seats and covers - Specifications |
IS 2548 (Part-2) | Plastic seats and covers for water closets Part 2: Thermoplastic seats and covers.- Specifications |
IS 2556 | Vitreous sanitary appliances (vitreous china) -Specifications |
IS 2556 (Part-1) Part-1 | General requirements. |
IS 2556 (Part-2) | Specific requirements of Wash-down water closets. |
IS 2556 (Part-3) | Specific squatting pans. |
IS 2556 (Part-4) | Specific requirements of Washbasins. |
IS 2556 (Part-5) | Specific requirements of laboratory sinkS. |
IS 2556 (Part-6) Part-6 | Specific requirements of Urinals & Partition plates |
IS 2556 (Part-7) | Specific requirements of accessories for sanitary appliances |
IS 2556 (Part -14) | Specific requirements of integrated squatting pans. |
IS 2556 (Part -15) | Specific requirements of universal water closets. |
IS 2963 | Specification for Copper alloy waste fittings for Wash basins and Sinks. |
IS 3076 | Specification for low density polyethylene pipes for potable water Supplies. |
IS: 10297 - 1982 | Design and Construction of Floors and Roofs using Precast Reinforced/ Prestressed Concrete Ribbed or Cored Slab units. |
IS: 6006-1983 | Uncoated Stress relived Strand for Prestressed concrete |
IS: 8520 – 1977 | Guide for selection of industrial safety equipment for eye, face and ear protection. |
IS: 8519 – 1977 | Guide for selection of industrial safety equipment for body protection |
IS: 1566 – 1967 | Hard – Drawn steel wire Fabric for concrete reinforcement |
IS: 6313 (Part-III) 1981 | Anti-Terminate measures in buildings Part-III Treatment for existing buildings |
IS: 1080 – 1985 | Shallow foundations in soils (other than Raft, Ring and Shell) – (2 copies) |
IS: 822 – 1970 | Inspection of welds |
IS: 8009 (Part-I) - 1976 | Calculation of settlements of foundations. |
IS: 1904 – 1986 | Design and Construction of foundations in soils |
IS: 383 – 1970 | Coarse and fine aggregates from natural sources for concrete. |
IS: 6403 – 1981 | Determination of bearing capacity of shallow foundations |
IS: 6313 (Part-II) 1981 | Anti-Termite measures in buildings |
IS: 10042 – 1981 | Site Investigations for foundation in gravel – boulder deposit. |
IS: 280 - 1978 | Mild Steel wire for general engineering purposes. |
IS: 432 (Part-I) 1982 | Mild Steel and medium tensile steel bars and hard – drawn steel wire for concrete reinforcement |
IS: 9143 - 1979 | Determination of unconfined compressive strength of rock materials |
IS: 10379 - 1982 | Field control of moisture and compaction of soils for embankment and subgrade |
IS: 1489 (Part-2)1991 | Portland – Pozzolana cement – specification (calcined clay based) |
IS: 7272 (Part – 1) 1974 | Labour output constants for building work (north zone) |
IS: 8142 - 1976 | Determining setting time of concrete by penetration resistance |
IS: 4984 – 1995 | High Density Polyethylene pipes for water supply - specification |
IS: 1477 (Part-1) 1971 | Painting of Ferrous metals in buildings (Pretreatment) |
IS: 1477 (Part-2) 1971 | Painting of Ferrous metals in buildings (Painting) |
IS: 1893 (Part-1) | Explanatory Examples on Indian Seismic |
IS: 650 : 1991 | Standard Sand for Testing Cement – Specificaiton |
IS: 2505 : 1992 | Concrete vibrators – Immersion Type-General Requirements |
IS: 4014 (Part-1) 1967 | Steel Tubular Scaffolding (Definitions and materials ) |
IS: 9013 – 1978 | Method of making, Curing and determining compressive strength of accelerated-cured concrete test specimens. |
IS: 14268 : 1995 | Uncoated stress relieved low relaxation seven-ply strand for prestressed concrete-specification. |
IS: 9595 : 1996 | Metal – Arc welding of carbon and carbon manganese steels – recommendation. |
IS: 2911 (Part-4) 1985 | Design and construction of Pile foundations (Load Test on Piles) |
IS: 459-1992 | Corrugated and Semi-corrugated Asbestas Cement sheets specification. |
IS: 8142-1976 | Determining setting time of concrete by penetration resistance. |
IS: 2062-1992 | Steel for General Structural purposes – specification |
IS: 4082-1996 | Stacking and storage of construction materials and components at site- recommendations. – 2 copies |
IS: 801-1975 | Use of cold-formed light Gauge steel structural members in general building construction. |
IS:2720 (part-17) 1986 | Methods of test for soils (part-17) Laboratory Determination of Permeability. |
IS: 4326-1993 | Earthquake Resistant Design and Construction of Buildings |
IS: 15284 (Part-1) 2003 | Design and construction for ground Improvement-guidelines-part 1 (stone columns) |
IS: 4985 : 2000 | Unplasticized PVC Pipes for Potable water supplies – specification |
IS: 3103 - 1975 | Industrial Ventilation |
IS: 2470 (part-1) 1985 | Installation of Septic Tanks (Part-1) Design criteria and construction |
IS: 2502 - 1963 | Bending and fixing of bars for concrete reinforcement. |
IS: 432-1982 | Mild Steel and medium Tensile Steel Bars and hard-Drawn Steel wire for concrete Reinforcement (part-1) Mild Steel and medium Tensile steel Bars |
IS: 875 (part-4) 1987 | Design loads (other than earthquake ) for buildings and structures (part-4) snow loads. |
IS: 7317-1993 | Uniaxial Jacking Test for modules of Deformation of rock. |
IS: 2440:1975 | Daylighting of Buildings |
IS: 7861 (Part-II) 1981 | Extreme weather concreting (Part – II) recommended Practice for cold weather concreting. |
IS: 3812 - 1981 | Specification for Fly ash for use as pozzolara and Admixture. |
IS:2911 (Part–I) Sec I)-1979 | Design and construction of Pile foundations (part – 1) concrete piles section : Driven Cost in situ concrete piles. |
IS: 9103 - 1999 | Concrete Admixtures – Specification. |
IS: 269 : 1989 | Ordinary Portland Cement, 33 grade- specification. |
IS: 10262 - 1982 | Recommended Guidelines for concrete mix design. |
IS: 3770 (P-1) 1965 | Concrete structure for the storage of liquids (Part – 1,2) |
SP-7: 1983 (Part-IV) | National Building code of India – 1983 |
IS - 8329 : 2000 | Centrifugally cast (span) ductile Iron pressure Pipes for water, gas and Sewage-Specification. |
IS - 1254 : 1991 | Corrugated Aluminium Sheet – Specification. |
IS:875 (Part-1) - 1987 | Dead loads – Unit weights of building materials and stored materials. |
IS: 1893 (Part –1) 2002 | Criteria for earthquake resistant design of structures |
IS: 13072 ; 1991 | Sulphur Hexafluoride for Electrical purposes – Specification |
IS: 11973-1986 | Treatment of rock foundations, core and abutment contacts with rock, for embankment dams |
IS: 12955 (Part-2) 1990 | IN-SITU Determination of rock mass deformability using a flexible dilatometer |
IS: 13365 (Part-2) 1992 | Quantitative classification systems of rock mass – guidelines |
IS: 2911 (Part – III) 1980 | Design and construction of pile foundations (Under-Reamed piles) |
IS: 1566 - 1982 | Specification for Hard-Drawn steel wire fabric for concrete reinforcement |
IS: 2132-1986 | Thin welded tube sampling of soils |
IS: 1641 - 1988 | Fire safety of building (General) |
IS: 1893 (Part – 1) 2002 | Criteria for Earthquake resistant design of structures – 2 copies |
IS: 4926 : 2003 | Ready Mixed concrete |
IS: 14687: 1999 | False work for Concrete Structures – Guidelines |
IS: 1893 - 1984 | Criteria for earthquake resistant design of structures – 2 copies |
IS: 10589 – 1983 | Specification for equipment for subsurface sounding of soils |
IS: 800 : 2007 | General construction in steel |
IS: 3443 - 1980 | Specification for Crane rail sections |
IS: 2386 (Part-I-V) 1963 | Test for Aggregates for concrete |
IS: 3043 - 1987 | Code of practice for earthing - 2 copies |
IS: 3419 - 1989 | Fittings for rigid non- metallic conduits |
IS: 14900 - 2000 | Transparent float glass |
IS: 811 - 1987 | Cold formed light gauge structural steel sections |
IS: 2026 (Part II) 1977 | Power Transformers, Part-II Temperature - Rise |
IS: 9537 (Part I) 1980 | Conduits for Electrical Installations ( General Requirements ) |
IS: 694 - 1990 | PVC Insulated cables for working voltages up to and in including 1100 volts |
IS: 7098 (Part-I) 1988 | Cross linked polyethylene insulated PVC sheathed cables. |
IS: 732 - 1989 | Electrical Wiring installations |
IS: 1391 (part 2) 1992 | Room Air Conditioners (Split Air Conditioners) |
IS: 2720 (Part 8) 1983 | Methods of test for soils |
IS: 2720 (Part 5) 1985 | Methods of test for soils |
IS: 2190 : 1992 | Selection, Installation and maintenance of first-aid fire extinguishers |
IS: 12070 - 1987 | Design and construction of shallow foundations on rocks |
IS: 1554 (Part 1) 1988 | PVC insulated (Heavy Duty) Electric Cables |
IS: 1904 - 1986 | Design and construction of foundations in soils |
IS: 1172 - 1993 | Basic requirements for water supply, drainage and sanitation |
IS: 2064 : 1993 | Selection, Installation and maintenance of sanitary appliances |
IS: 2026 (Part – 5) 1994 | Power Transformers |
IS: 7098 (Part 2) 1985 | Cross linked polyethylene insulated PVC Sheeted Cables |
IS: 7098 (Part 1) 1988 | Cross linked polyethylene insulated theermoplastic Sheathed cables |
IS: 2026 (Part I) 1977 | Specification for power Transformers (General) – 2 Copies |
IS: 2026 (Part III) 1981 | Specification for power transformers (Insulation, Levels, Dielectric tests) |
IS: 10028 (Part II) 1981 | Selection, installation and maintenance of transformers (Installation) |
IS: 8009 - 1976 | Calculation of Settlement of foundations |
IS: 2950(Part 1) 1981 | Design and construction of raft foundations (Design) |
IS: 4885 - 1988 | Specification for Sewer Bricks |
IS: 2974 (Part I) 1982 | Design and construction of machine foundations |
IS: 908 - 1975 | Fire Hydrant, Stand Post Type |
IS: 4631 - 1986 | Laying of Epoxy resin floor toppings |
IS: 5491 - 1969 | Laying in Situ granolithic concrete floor topping |
IS: 2571 - 1970 | Laying IN – SITU cement concrete flooring. |
IS: 4971 - 1968 | Selection of Industrial floor finishes |
IS: 1255 - 1983 | Installation and maintenance of power cables up to and including 33 kv |
IS: 2571-1970 | Laying IN-SITU cement concrete flooring |
IS: 2792-1964 | Design and construction of stone slab over joist floor |
IS: 1888-1992 | Method of Load Test on Soils |
IS: 783 - 1985 | Laying of Concrete Pipes |